Hanwha Vision SBP-300PMW2 Pole Mount Adaptor Network Camera Store User Guide
- June 13, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SBP-300PMW2 Pole Mount Adaptor Network Camera Store
Product Information
The Corner Mount Adaptor (SBP-300KM1/SBP-300KMW1) is an adaptor used to install the Wall Mount Adaptor in a corner of the wall. It is available in ivory and white colors. The Pole Mount Adaptor (SBP-300PM1/SBP-300PMW2) is used to install the Wall Mount Adaptor onto a pole with a diameter of at least 80 mm. It is also available in ivory and white colors.
Product Usage Instructions
Before installation, please take note of the following precautions:
- Make sure that the installation place can endure at least 4 times the total weight of the Corner/Pole Mount Adaptor, Wall Mount Adaptor, Hanging Mount Adaptor, and Camera.
- Each anchor bolt used must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
- This product is designed to use M10 Anchor Bolts (Nuts) for installation.
- If you install the Corner Mount Adaptor on a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.
Follow the steps below to install the Corner Mount Adaptor:
- Choose a suitable corner on the wall for installation.
- Ensure that the chosen corner can support at least 4 times the weight of the Corner Mount Adaptor, Wall Mount Adaptor, Hanging Mount Adaptor, and Camera.
- Use M10 Anchor Bolts (Nuts) along with plain and spring washers to secure the Corner Mount Adaptor to the wall. For concrete walls, it is recommended to use anchor bolts along with washers.
- Once securely installed, attach the Wall Mount Adaptor to the Corner Mount Adaptor using the provided screws.
- Ensure that the Wall Mount Adaptor is firmly attached to the Corner Mount Adaptor.
- Finally, attach the camera to the Wall Mount Adaptor using the appropriate mounting hardware.
Follow the steps below to install the Pole Mount Adaptor:
- Choose a suitable pole with a diameter of at least 80 mm for installation.
- Ensure that the chosen pole can support at least 4 times the weight of the Pole Mount Adaptor, Wall Mount Adaptor, Hanging Mount Adaptor, and Camera.
- Use M10 Anchor Bolts (Nuts) along with plain and spring washers to secure the Pole Mount Adaptor to the pole.
- Once securely installed, attach the Wall Mount Adaptor to the Pole Mount Adaptor using the provided screws.
- Ensure that the Wall Mount Adaptor is firmly attached to the Pole Mount Adaptor.
- Finally, attach the camera to the Wall Mount Adaptor using the appropriate mounting hardware.
Ensure that all connections are tight and secure before operating the camera.
Package
Product Overview
- SBP-300KM1/SBP-300KMW1: This is an adaptor that is used to install the Wall Mount Adaptor in a corner of the wall.
- SBP-300PM1/SBP-300PMW2: This product is used to install the Wall Mount Adaptor onto a pole of at least 80 mm in diameter.
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the Corner/Pole Mount Adaptor, Wall Mount Adaptor, Hanging Mount Adaptor, and Camera.
- Each anchor bolt to use must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
- This product is designed to use M10 Anchor Bolts (Nuts) for the installation.
- If you install the Corner Mount Adaptor on a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.
Installation
SBP-300KM1/SBP-300KMW1
- Mark and drill 8 holes into the Corner Mount Adaptor where you will insert the Anchor Bolts or Nuts (M10), and fasten the Corner Mount Adaptor with the Bolts, plain and spring washers.
- Insert the cables through the Corner Mount Adaptor.
- Use the provided Bolts, Spring Washers and Plain Washers to mount the Wall Mount Adaptor onto the product.
For more information, refer to the installation guide of the Wall Mount Adaptor.
SBP-300PM1/SBP-300PMW2
- Select a pole to install and confirm the installation height.
- Use the Stainless Steel Mounting Strap to secure the Pole Mount Adaptor to the pole.
- Insert the cables through the Pole Mount Adaptor.
- Use the provided Bolts, Spring Washers and Plain Washers to mount the Wall Mount Adaptor onto the product.
For more information, refer to the installation guide of the Wall Mount Adaptor
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>