ZEBRONICS ZEB-CLAW 4 4.1 Speaker User Manual
- June 13, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS ZEB-CLAW 4 4.1 Speaker User Manual
T h e l i g h t n i n g fl a s h
w it h arrowhead symbol, within an exclamation triangle, is intended to alert
the user to the presence of uninsulated dangerous voltage within the products
enclosure that may be of s u ffi c i e n t m a g n i t u d e t o constitute a
risk of electric shock
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE BACK
The exclamation point within an
equilateral triangle is intened to alert the user to the presence of impor t
ant ope ra ting and m a i n t e n a n c e ( S e r v i c i n g ) insructions.
T h a n k y o u f o r p u r c h a s i n g t h e ZEB-CLAW 4 – 4.1 Speaker. Please read the user manual carefully before usage & save it for future reference.
Note:
- Avoid the usage of this speaker at the high temperature and high humidity environment.
- Avoid the self-disassembly of the product as it results in the failure of Warranty.
- Please turn off the power and pull out the plug, when the speaker is not in use.
Features
4.1 Channel speaker
Wireless BT/USB/SD/AUX/FM
LED Display
13.33cm Subwoofer Remote control
Specification
Output power (RMS)
- Subwoofer : 30 Watts
Satellite : 15 Watts x 4
Total : 90 Watts
Driver size
- Subwoofer : 13.33 cm x 1
- Satellite : 7.62 cm x 4
Impedance
-
Subwoofer : 4Ω
-
Satellite : 4Ω
-
Frequency response : 40Hz – 20kHz
-
S/N Ratio : ≥72dB
Separation : ≥45dB -
File format support (USB/SD) : MP3
-
Line Input : 2ch RCA
-
Max. supported memory size (USB/SD) : 32GB
-
FM frequency range : 87.5 MHz – 108 MHz
-
BT Name : ZEB-CLAW 4
-
BT Version : v5.0
Product dimensions
- Subwoofer : 17.5 x 30 x 26.5 cm (W x D x H)
- Satellite : 10 x 16.5 cm (Dia. x H)
- Net. weight
- Subwoofer : 3.11 kg
- Satellite : 464g x 4
- Total : 4.9kg
Package content
- Subwoofer : 1 U
- Satellite : 4 U
- Remote control : 1 U
- Input cable : 1 U
- QR Code guide : 1 U
Descriptions
Front panel
-
USB:
USB Port for the pen drive -
SD CARD:
SD/MMC Card Slot -
INPUT:
Select the Input source (AUX, Bluetooth, USB, SD or FM) -
PLAY:
In USB/SD mode: Press to Play the track. Press again to Pause the playing track. Press to Play again.
In FM mode: Long Press to search and save the FM Channels. Short Press will Mute the audio in Aux & FM Modes.
Press again to release it from Mute. -
VOLUME:
Master Volume+/- Control -
NEXT:
In USB/SD mode: Press to go to next track.
In FM mode: Press to go to next pre-saved FM channel.
In all modes: Press and hold to increase the volume. -
PREV:
In USB/SD mode: Press to go to previous track.
In FM mode: Press to go to previous pre-saved FM channel.
In all modes: Press and hold to decrease the volume.
Control panel
SATELLITE
Remote control
INPUT : The input signal switching (AUX/Bluetooth/USB/SD/FM)
PREV : Previous track in BT/ USB & SD Card modes, previous FM station in
FM mode.
PLAY/PAUSE : Play & pause in BT/USB & SD Card modes, Mute / Unmute in AUX
& FM modes, Long press for auto searching – FM station in FM mode.
NEXT : Next track in BT/ USB & SD Card mode Next FM station in FM mode.
AUX : AUX input
USB : USB input
SD : SD input
BT : BT input
Numeric Pad (0-9) : 0 TO 9 button is the selection key to select the tracks in
the USB and SD Card
100+ : This is used to select track when more than hundred tracks in your
USB/SD Card.
EQ : Equalizer presets in USB & SD/MMC modes.
PASS/POP/ROCK/JAZZ/CLASS/COUNT/NORMAL.
VOLUME + / – : Volume level increase & decrease
General Instructions
BT Mode:
Switch the speaker to BT mode, Scan for nearby BT devices in your device. Tap
on “ZEB-CLAW 4“ to connect.
USB / SD Mode:
Insert the USB/SD flash drive to the speaker. The speaker will detect the
USB/SD and the audio files from flash drive will be played automatically.
(This mode isn’t selectable on the speaker or remote control unless a USB/SD
flash drive is connected).
Ensure that your USB/SD flash drive contains MP3 files (other file types not supported).
FM Radio:
Switch the speaker to FM mode. In FM mode, press & hold the “Play / Pause”
button in the remote or control panel to scan for the available FM channels.
Once the scanning is done, the scanned channels will begin to play.
The next button or previous button in the remote or control panel can be used
to change the FM channels.
AUX-IN:
The speaker can be connected to an audio device using an RCA to 3.5mm cable.
Connect the one end of the cable to the speaker and the other end to an audio
source.
The tracks from the audio source can be heard through the speaker.
ISO 9001:2015 Certified Company www.zebronics.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>