LUMINA LIMBUS Eye Table Lamp LED Instruction Manual
- June 4, 2024
- LUMINA
Table of Contents
LUMINA LIMBUS Eye Table Lamp LED
Instructions
The lamp blinks for a second when maximum dimming is reached
Insulation class III
Fitting suitable formounting on normally flammable surfaces. During the normal use the device has a low photobiological risk (Risk Group 1 according to EN62471:2008).
REMARKS FOR A SAFE USE
- The light fitting that you have purchased has been designed and built according to European security norms in force and is certified by an appointed Institute.
- The safe use of a light fitting emboding high-temperature components requires, beyond the necessary attention, to carefully follow these instructions:
- Read carefully and conserve the instructions for the correct use of the light fitting. We suggest to have the fitting installed by a specialized technician.
- Do not use the light fitting for improper applications, that haven’t been foreseen in the project.
- Do not use bulbs (if any) of higher power than the one specified in the instructions and on the labels sticked on the light fitting.
- When cleaning or changing the bulb (if any) of the light fitting, remember to:
- previously unplug the same or switch off the main.
- let the light fitting and the bulb cool down before touching it with the hands. Integrated led systems, electronics components, rechargeable batteries can NOT be replaced by final user (unless otherwise stated).
Please contact your Lumina dealer for checking and repairing.
- Never clean the light fitting when hot or under tension.
- Never use flammable products to clean the light fitting.
- The glass components – bulb included – can break and therefore are dangerous if uncarefully handled.
- Light fittings should be installed out of the reach of children and in such a position where they cannot be hit by anything.
- Do notinstall the light fitting too close to flammable materials (curtains, etc.), nor cover it, to prevent the normal cooling.
- Do not allow children to play with the fitting.
- In case of troubles, misworking or damage to the cable (if any), contact your Lumina dealer for checking and repairing.
LUMINA ITALIA Srl via Casorezzo, 63 20004 Arluno (MI)
Tel. +39 02 903752
[email protected]
Read User Manual Online (PDF format)
Loading......