ZKTeco ProlD104 Scratch Proof RFID Access Control Reader User Manual

: June 13, 2024
: ZKTECO

Table of Contents

ZKTeco ProlD104 Scratch Proof RFID Access Control Reader
Overview
Specifications
Terminal and Wiring Description
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZKTeco ProlD104 Scratch Proof RFID Access Control Reader

USER MANUAL

Scratch Proof RFID Access Control Reader

Applicable Models: ProlD104
Version: 1.0
Date: July 2023

Thank you for choosing our product. Please read the instructions carefully before operation. Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only.
For further details, please visit our Company’s website www.zkteco.com.

ProlD104 Scratch Proof RFID Access Control Reader User Manual
Without the prior written consent of ZKTeco, no termination of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the Company or ZKTeco).

Trademark
ZKTe co is a registered trademark of ZKTeco. Other trademarks involved in this manual are owned by their respective owners.

Disclaimer

This manual contains information on the operation and maintenance of the ZKTeco equipment. The copyright in all the documents, drawings, etc. in relation to the ZKTeco supplied equipment vests in and is the property of ZKTeco. The contents hereof should not be used or shared by the receiver with any third party without the express written permission of ZKTeco.
The contents of this manual must be read as a whole before starting the operation and maintenance of the supplied equipment. If any of the content(s) of the manual seems unclear or incomplete, please contact ZKTeco before starting the operation and maintenance of the said equipment.
It is an essential pre-requisite for the satisfactory operation and maintenance that the operating and maintenance personnel are fully familiar with the design and that the said personnel have received thorough training in operating and maintaining the machine/unit/equipment. It is further essential for the safe operation of the machine/unit/equipment that personnel has read, understood and followed the safety instructions contained in the manual.
In case of any conflict between terms and conditions of this manual and the contract specifications, drawings, instruction sheets or any other contract-related documents, the contract conditions/documents shall prevail. The contract specific conditions/documents shall apply in priority.
ZKTeco offers no warranty, guarantee or representation regarding the completeness of any information contained in this manual or any of the amendments made thereto. ZKTeco does not extend the warranty of any kind, including, without limitation, any warranty of design, merchantability or fitness for a particular purpose.
ZKTeco does not assume responsibility for any errors or omissions in the information or documents which are referenced by or linked to this manual. The entire risk as to the results and performance obtained from using the information is assumed by the user.
ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential, indirect, special, or exemplary damages, including, without limitation, loss of business, loss of profits, business interruption, loss of business information or any pecuniary loss, arising out of, in connection with, or relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages.

Copyright © 2023 ZKTECO CO., LTD. All rights reserved.
Without the prior written consent of ZKTeco, no termination of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the “Company” or “ZKTeco”).

Trademark
ZKTaco is a registered trademark of ZKTeco. Other trademarks involved in this manual are owned by their respective owners.

Disclaimer
This manual contains information on the operation and maintenance of the ZKTeco equipment. The copyright in all the documents, drawings, etc. in relation to the ZKTeco supplied equipment vests in and is the property of ZKTeco. The contents hereof should not be used or shared by the receiver with any third party without the express written permission of ZKTeco. The contents of this manual must be read as a whole before starting the operation and maintenance of the supplied equipment. If any of the contents) of the manual seems unclear or incomplete, please contact zkreco before starting the operation and maintenance of the said equipment. It is an essential pre- requisite for the satisfactory operation and maintenance that the operatina and maintenance personnel are fully familiar with the design and that the said personnel have received thorough training in operating and maintaining the machine/unit/equipment. It is further essential for the safe operation of the machine/unit/equipment that personnel has read, understood and followed the safety instructions contained in the manual In case of any conflict between terms and conditions of this manual and the contract specitications, drawings, instruction sheets or any other contract-related documents, the contract conditions/ drawings, instruction sheets or any other contract-related documents, the contract conditions/ documents shall prevail. The contract soecific conditions/documents shall apply in priority.
ZKreco offers no warranty. guarantee or representation recalcine the completeness or any information contained in this manual or any of the amendments made thereto. ZKTeco does not extend the warranty of any kind, including, without limitation, any warranty of design, merchantability or ices for a particular purpose ZKTeco does not assume responsibility for any errors or omissions in the information or documents which are referenced by or linked to this manual. The entire risk as to the results and performance obtained from using the information is assumed by the user. ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential. ZKTeco in no event shall be liable to the user or any third party for any incidental. consequential. indirect, special, or exemplary damages, including, without limitation, loss of business, loss of profits, indirect. special, or exemplary damages, including. without limitation. loss of business, loss of profits. business interruption. loss of business information or any pecuniary loss. arising out of. in connection business interruption, loss of business information or any pecuniary loss, arising out of, in connection with. or relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages
This manual and the information contained therein may induce technical, other inaccuracies o typographical errors. ZKTeco periodically changes the information herein which will be incorporate into new additions/amendments to the manual. ZKTeco reserves the right to add, delete, amend o modify the information contained in the manual from time to time in the form of circulars, letters notes, etc. for better operation and safety of the machine/unit/equipment. The said additions or amendments are meant for improvement /better operations of the machine/unit/equipment and such amendments shall not give any right to claim any compensation or damages under any circumstances.
ZKTeco shall in no way be responsible

in case the machine/unit/equipment malfunctions due to any non-compliance of the instructions contained in this manual
in case of operation of the machine/unit/equipment beyond the rate limits
in case of operation of the machine and equipment in conditions different from the prescribed conditions of the manual.

The product will be updated from time to time without prior notice. The latest operation procedures and relevant documents are available on http://www.zkteco.com.
If there is any issue related to the product, please contact us.

ZKTeco Headquarters

Address ZKTeco Industrial Park, No. 32, Industrial Road,
Tangxia Town, Dongguan, China.
Phone +86 769 – 82109991 Fax +86 755 – 89602394
For business-related queries, please write to us at sales@zkteco.com.
To know more about our global branches, visit www.zkteco.com.

About the Company
ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks. Our security solutions are multi-lingual and localized in over 18 different languages. At the ZKTeco state-of-the-art 700,000 square foot ISO9001-certified manufacturing facility, we control manufacturing, product design, component assembly, and logistics/shipping, all under one roof.
The founders of ZKTeco have been determined for independent research and development of biometric verification procedures and the productization of biometric verification SDK, which was initially widely applied in PC security and identity authentication fields. With the continuous enhancement of the development and plenty of market applications, the team has gradually constructed an identity authentication ecosystem and smart security ecosystem, which are based on biometric verification techniques. With years of experience in the industrialization of biometric verifications, ZKTeco was officially established in 2007 and now has been one of the globally leading enterprises in the biometric verification industry owning various patents and being selected as the National High-tech Enterprise for 6 consecutive years. Its products are protected by intellectual property rights.

About the Manual
This manual introduces the operations of ProlD104 Scratch Proof RFID Access Control Reader.
All figures displayed are for illustration purposes only. Figures in this manual may not be exactly consistent with the actual products.
Features and parameters with ★ are not available in all devices.

Document Conventions
Conventions used in this manual are listed below: GUI Conventions

For Software

Convention| Description
Bold font| Used to identify software interface names e.g., OK , C o n f i r m , Cancel.
> **| Multi-level menus are separated by these brackets. For example, File > Create > Folder.
For Device
Convention| Description
< >| Button or key names for devices. For example, press .
[ ]| Window names, menu items, data table, and field names are inside square brackets. For example, pop up the [New User] window.
/**| Multi-level menus are separated by forwarding slashes. For example, [File/Create/Folder].

Symbols

Convention	Description
This represents a note that needs to pay more attention to.
The general information which helps in performing the operations faster.
The information which is significant.
Care taken to avoid danger or mistakes.

| The statement or event that warns of something or that serves as a cautionary example.

Overview

Introduction
The ProlD104 is a highly advanced RFID access control reader launched by ZKTeco. ProlD104 supports IC card, CPU card and NFC. Also, the device features a sleek and stylish design that combines 2.5D tempered glass and a metal oxidation process to create a refined and compact appearance. This highly integrated product supports reading cards, passwords, and tamper functions, and is supported by strong hardware for stable operation. In addition, it supports Wiegand and RS485 communication, making it compatible with a wide range of controllers.

Appearance

Features

2.5D tempered glass & metal oxidation process.
Support the RFID card and password identification.
Support IC card, CPU card, and NFC.
Support Wiegand communication and RS485 communication.
Tamper alarm.
Personalized light and sound settings.

Specifications

Items	Specifications
Product Model	ProID104
Product Function	RFID card identification, password identification,

disassembly alarm
Card Reading Frequency| 13.56MHz
Card Type| IC Card, CPU Card, NFC
Reading Range| 0 to 2 cm
Communication Type| Wiegand26, Wiegand34, Wiegand66, RS485
Operating Temperature| 0°C to 45 °C
Operating Humidity| 20% to 90% RH
Operation Voltage| DC12V 1A
Working Current| Standby current less than 100mA, the swipe current is less than 300mA
Product Size| 86 × 86 × 11.2 mm
Electrostatic Discharge Immunity| Contact discharge ±4KV, air discharge ±8KV
Vandal Proof Protection Rating| IK04
Compatible Controller| InBio Pro, C3 Series

Terminal and Wiring Description

Terminal Description

Figure 2-1 Terminal Description

Name	Interface	Description

Power

| +12V| ****

DC12V Input

GND

Wiegand Out

Table 2-1 Description of Terminal and Interfaces

Description: When the tamper screw at the bottom of the equipment is removed, the tamper switch is triggered, and then the buzzer alarm is issued.

Wiring Description 2.2.1 Power Wiring

Figure 2-2 Power Wiring

Notes

Use the power adapter provided by a regular manufacturer as recommended. Recommended AC adapter : DC12V 1A.
Use an AC adapter with a higher current rating to share power with the other devices.

Controller Connection
This ProlD104 reader can be connected to the controller and set by software to achieve the function. The following is an example of the connection to In Bio Pro controller.

Connect the controller via RS485

Figure 2-3 Readers connect the controller via RS485 Set the Reader Address

Device Side: Before connecting the RS485 reader, you must set the RS485 address of the reader (device number) via touch key. On the reader’s touch panel, press # → Input the administrator password → 8 → 6 → 1~32 → # (e.g. press # → 1234 → 8 → 6 → 1 → #, the RS485 address of reader is changed to 1).
Software Side (ZKBioCV Security ): Click [Access Control] > [Access Control Device] > [Reader], select the reader and click . Enter the communication address of the reader on the editing interface, and the RS485 address (device number) of the reader can be set through the software.

By default, the odd number is the entry reader, and the even number is the exit reader. For example, the RS485 address of reader #1 is 1, which correspond to the door #1 entry reader, the RS485 address of reader #2 is 2, which correspond to the door #1 exit reader, and so on. For details, see the software user manual.

RS485 Address

Controller

|

1

|

2

|

3

|

4

|

5

|

6

|

7

|

8

---|---|---|---|---|---|---|---|---
InBio Pro| #1 In| #1 Out| | | | | |
InBio Pro| #1 In| #1 Out| #2 In| #2 Out| | | |
InBio Pro| #1 In| #1 Out| #2 In| #2 Out| #3 In| #3 Out| #4 In| #5 Out

Table 2-2 The default RS485 address code corresponds to the controller door

Connect the controller via Wiegand

Figure 2-4 Readers connect the controller via Wiegand For details, please see the controller user manual.

Installation Set-up
Mounting on the Wall through Asian Gang Box

Step 1 : Install the Asian gang box (or single gang box, mullion mount) into the wall.
Step 2 : Fix the back plate onto the Asian gang box (or single gang box, mullion mount) using two wall mounting screws.
Step 3 : Pass the cables through the wire hole.
Step 4: Then insert the device into back plate.
Step 5: Use security screw to fasten the device to the back plate.

Figure 3-2 Install the ProlD104 reader on the wall through Asian gang box

Operating Instruction
Press *# to enter the setting mode and input the administrator password (1234 by default). After entering the setting mode, the indicator will turn green. Otherwise, the operation fails.

Modify the Administrator Password
Press *# → Input the old administrator password → 0 → Input the new password → # → Input the new password again → #.

For Example : *# → 1234 → 0 → 1234567 → # → 1234567 → #

Notes

The administrator password contains 1 to 8 characters. After successful verification, the administrator enters the setting mode.
If you forget the administrator password, you can reset the password by restoring the default settings. Set the Wiegand Output Mode

Press *# → Input the administrator password → 8 → 5 → 0/1/2/3 → #. 0: Wiegand 26.

Wiegand 34 (Default).
Reserved.
Wiegand 66.

Set the Reader Address
Press *# → Input the administrator password → 8 → 6 → 1~32 → #.
Note: Set the reader RS485 address. The value ranges from 1 to 32.

Set the Keystroke Sound
Press *# → Input the administrator password → 8 → 7 → 0~9 → #.
Note: The number from 0 to 9 corresponds to different sounds.

Set the Background Light
Press *# → Input the administrator password → 8 → 8 → 0/1/2 → #

Normally Close.
Normally Open.
Breathing Light.

Restore the Default Settings
First, remove the mounting screws from the bottom, and then long press the reset button at the bottom for 4 seconds until the blue indicator lights up four times, the buzzer rings for four times, and then the buzzer buzzes for one short time. The device is restored to default settings.

Appendix 1 Eco-friendly Operation

The product’s “eco-friendly operational period” refers to the time during which this product will not discharge any toxic or hazardous substances when used in accordance with the prerequisites in this manual.

The eco-friendly operational period specified for this product does not include batteries or other components that are easily worn down and must be periodically replaced. The battery’s eco-friendly operational period is 5 years.

Hazardous or Toxic substances and their quantities
Component Name| Hazardous/Toxic Substance/Element
Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent Chromium (Cr6+)| **** Polybrominated Biphenyls (PBB)| Polybrominated Diphenyl Ethers (PBDE)
Chip Resistor| ×| ○| ○| ○| ○| ○
Chip Capacitor| ×| ○| ○| ○| ○| ○
Chip Inductor| ×| ○| ○| ○| ○| ○
Diode| ×| ○| ○| ○| ○| ○
ESD

component

| ×| ○| ○| ○| ○| ○
Buzzer| ×| ○| ○| ○| ○| ○
Adapter| ×| ○| ○| ○| ○| ○
Screws| ○| ○| ○| ×| ○| ○
○ indicates that the total amount of toxic content in all the homogeneous materials is below the limit as specified in SJ/T 11363—2006.

× indicates that the total amount of toxic content in all the homogeneous materials exceeds the limit as specified in SJ/T 11363—2006.

Note: 80% of this product’s components are manufactured using non-toxic and eco-friendly materials. The components which contain toxins or harmful elements are included due to the current economic or technical limitations which prevent their replacement with non-toxic materials or elements.

ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China.