Purple KW-B05 Smart Watch User Manual

Purple KW-B05 Smart Watch

Product Information

• This device is designed to comply with Part 15 of the FCC Rules, which governs the operation of electronic devices in the United States. It has been evaluated to meet general RF exposure requirements in portable exposure conditions without any restrictions.
• It is important to note that any changes or modifications made to this device, without explicit approval from the party responsible for compliance, may void the user’s authority to operate the equipment. Therefore, it is recommended to use the device as intended without any alterations.
• Additionally, it is crucial that this device and its antenna(s) are not co-located or operated in conjunction with any other antenna or transmitter. This is to prevent interference that may cause undesired operation.

Product Usage Instructions

1. Ensure that the device is placed in a suitable location where it can operate without obstruction.
2. Connect the device to a power source using the provided power cable.
3. Switch on the device using the designated power button or switch.
4. Wait for the device to initialize and establish a stable connection.
5. Once the device is ready, follow the specific instructions provided in the respective user manual for its intended purpose.
6. When using the device, make sure it is not placed near other antennas or transmitters to avoid interference.
7. If you experience any issues or undesired operation, ensure that no unauthorized modifications have been made to the device. If necessary, contact customer support for assistance.
8. To comply with RF exposure requirements, avoid prolonged close contact with the device. Maintain a reasonable distance while using it.
9. When not in use, switch off the device and disconnect it from the power source.

Downloading the App

Scan the following QR code, download and install the App

Scan OR Code and Download

Charging and Active ****

Charging the device to active before the first time using;
To charge your device, plug the charging cable into the adapter or USB port on your computer.

Pairing

• Open the App and set up your profile
• Go to the Devices , Click Add a Device]
• Choose your device on the scanning list
• Finish

Device Bluetooth name:

• KW-B05 (Synchronize data on the phone)
• KW-B05 Call (Synchronize calls and music on the phone)
• The MAC address on the “Setting”-“About” page could help Use the Touch Screenyou identify your device on the scanning list.

Use the Touch Screen

Smart Watch Features

• Sleep

  • If you keep wearing Smart Watch in your sleep, it can provide the hours slept and quality of sleep stats on both the screen and the APP.
    NOTE : Sleep stats reset to zero at 8:00 pm.

• Heart Rate Test

  • The Smart Watch could record your heart rate all day.
  • You also could tap on the page to start measuring heart rate.

• Sports

  • Smart Watch automatically tracks
  • Steps taken on the screen.
    NOTE : Your movement stats reset to zero at midnight.

• Training

  • Tap the training icon on the menu to start a new training measure recording, there are 8 sportmodes to be chosen.
  • The last training recording will be shown on the training page.

• Blood Pressure Test

  • Tap on the blood pressure page to start measuring your blood pressure.
  • On the blood pressure page, It can show the blood pressure measured data of the last times.

• Sp02 Test

  • Tap the Sp02 page to start measuring your Sp02.
  • On the Sp02 page, It can show the Sp02 measured data of the last times.

• Weather

  • It could show the weather info of current and tomorrow on the weather page.
  • Weather info is synced after con- necting with the APP, it will not be updated after a long disconneted.

• Messages Reminder

  • The device can sync incoming noti- fications from Twitter, Facebook,
  • Whatsapp, Instagram etc. Recently 5 messages can be stored.
    Note : You can switch of/off the incoming notification in the APP.

• Other Features

  • Other features include stopwatch, alarm, timer, brightness,mute on/off, theater mode,factory reset, power off and about.

• Stop Watch

  • Tap the start button on stopwatch page to start timing, and tap the stop button to stop timing.

• Silent Alarms

  • Set up the alarm on the APP, the device will vibrate to remind on time.

• DND Mode

  • The device will turn off the vibration and trun down the brightness when the dnd mode is truned on.
    Note : You can trun on/off the theater mode in the control center.

• Remind to Move

  • The device will vibrate to remind you to make a relax after 1 hour sitting.
    Note : You can switch on/off the feature in the APP.

• Remind to Drink

  • The smart watch will remind you “Time to Drink Some Water” at the planned drinking time.
    Note : You can set the feature in tht APP.

Getting to Know Your Device

Using in Wet Conditions

Your device is water-resistant, which means it is rain-proof and splash-proof and can stand up to even the sweatiest workout.
NOTE : Do not swim with your Smart Bracelet. We also don’t recommend showering with your wristband; though the water won’t hurt the device, wearing it 24/7 does not give your skin a chance to breathe. Whenever you get your bracelet wet, dryit thoroughly before putting it back on.

Using Quick View

With Quick View you can check the time or the message form your phone on your Smart Bracelet without taping. Just turn your wrist towards you and the time screen will appear for a few seconds.

1. Environmental Conditions
   Operating temperature: 14°F to 122°F (-10° to 50°C) Non-operating temperature: -4°F to 140°F (-20°C to 60°C)

2. Size
   Fits a wrist between 5.5 and 7.7 inches in circumference.

Disposal and Recycling

Please kindly be aware that it is the consumer’s responsibility to properly dispose and recycle Smart Bracelet and accompanying components. Do not dispose of Smart Bracelet with common household waste, the Smart Bracelet unit is considered electronic waste and should be disposed of at your local electronic equipment collection facility.

For more information, please contact your local electronic equipment waste management authority or the retailer where you bought the product.

Why is the watch unable to play music and make Bluetooth calls?

Open on the mobile phone: Settings – Bluetooth, check KW-B05 and KW-B05 Call’s connection status.KW-B05 and KW-B05 Call are connected, the device to achieve audio functionality.If KW-B05 is connected and KW-B05 Call is not connected, then you need to manually click on KW-B05 Call on your phone to connect. If the manual connection is not successful, you need to unbind the device in the APP, click the icon © in the Bluetooth status bar, choose to ignore this device, and then re-enter the APP for pairing operation.

Specification

Note : Measurement data cannot be used as a basis for medical diagnosis.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>