PURPLE LADYBUG A-PL-1146 Glitter Bracelet Making Kit for Girls Jewelry Instructions
- June 15, 2024
- Purple Ladybug
Table of Contents
PURPLE LADYBUG A-PL-1146 Glitter Bracelet Making Kit for Girls Jewelry
Product Information
Specifications
- Product Model: A-PL-1146
- Revision: v220721
- Recommended Age: Not intended for children under 3 years old
- Package Contents: Bracelet tube, connecting piece, glitter, gems, funnel
**Description
**
The Purple Ladybug Sparkly Bracelet Kit allows you to create 6 fun glittery and sparkly bracelets. It is designed for personal use or sharing with friends. The kit includes everything you need, except for water and a pair of scissors to adjust the bracelet length.
Our Story:
As a family-run business, Purple Ladybug is dedicated to creating products
that bring joy and inspire creativity. With a commitment to quality, our
award-winning products are safe and easy to use. We aim to provide a world of
creativity and enjoyment in every Purple Ladybug box.
Follow Us: Stay updated with Purple Ladybug on your favourite social media platform. Find us @PLBFUN or visit our website at www.plbfun.com.
Product Usage Instructions
Step A: Bracelet Length Adjustment
To ensure a proper fit, follow these steps:
- Measure the biggest part of your hand that the bracelet needs to fit over (around the part where your knuckles and thumb are), not your wrist.
- If the bracelet tube is too long, use a pair of scissors to cut it to the appropriate size.
TIP: Measure carefully to ensure the bracelet will fit comfortably.
Step B: Installing the Connecting Piece
Follow these steps to install the connecting piece:
- Take one of the short, smaller-diameter pieces of tubing included in the kit.
- Slide the connecting piece into one end of the bracelet tube, leaving half of it outside.
- If needed, push the connecting piece against a table or ask an adult for assistance to ensure a tight fit.
TIP: Wetting the connecting piece before sliding it in can make it easier to insert.
Step C: Decorating the Bracelet
Now it’s time to decorate your bracelet! Follow these steps:
- Take the included funnel and attach it to the end of the bracelet tube without the connector.
- Use the funnel to add glitter and gems into the tube.
Step D: Adding Glitter and Gems
Follow these steps to add glitter and gems:
- Pour a small amount of glitter or gems into the funnel.
- Tap the side of the funnel to allow the glitter and gems to go into the tube.
- Continue adding glitter and gems, tapping and adjusting as needed.
TIP: Avoid overfilling the bracelet to prevent clumping when water is added. Approximately half a pack of glitter or gems is recommended, but you can adjust based on personal preference.
Frequently Asked Questions (FAQ)
Can children under 3 years old use this product?
No, this product contains small parts and is not intended for children
under 3 years old.
Where can I find more detailed instructions and video tutorials?
For more detailed instructions and video tutorials, please visit
www.plbfun.com/instructions.
How can I contact Purple Ladybug?
You can follow Purple Ladybug on social media @PLBFUN or
visit their website at www.plbfun.com.
Make Your Liquid Glitter Bracelets
Revision : v220721
Keep a copy of these instructions for future reference. The latest version of
these instructions is available online at
WWW.PLBFUN.COM/INSTRUCTIONS
Additional resources such as examples on how to use, and tutorial videos are also available online at WWW.PLBFUN.COM/INSTRUCTIONS
FOR AGES 6 YEARS AND UP
WARNING :
CHOKING HAZARD: Small Parts. Not for Children Under 3 years.
WARNING:
Choking hazard: small parts. Not intended for children under 3 years old.
Carefully read all warning labels and instructions.
INSTRUCTIONS
For more detailed instructions and video tutorials, please visit WWW.PLBFUN.COM/INSTRUCTIONS
Refer to the photo section for visual details on each step below. With this sparkly bracelet kit, you can easily and quickly create 6 fun glittery, sparkly bracelets for yourself, or to share with your friends! Everything you need is included in this kit, except for water (from the tap is fine) and a pair of scissors (if you need to shorten the bracelet length to fit smaller wrists)
- A ) First, we need to make sure the bracelet tube is the appropriate length for your wrist and cut it to size if needed. To do this, loop the bracelet tube around your wrist (making sure it fits, and can slide out of your hand). Once you have the desired length, you can trim the excess from one end by using a pair of scissors to cut the tubing. (Make sure the cut is smooth, and not on an angle – this will make it fit better)
TIP : Measure the biggest part of your hand that it has to fit over (around the part where your knuckles and thumb are), not your wrist or else you won’t be able to get it on. Don’t cut the tube shorter than 6 ¾” (17.5cm) otherwise, it will kink.
- B ) Next, you need to install the connecting piece to one end of the bracelet tube. This is one of the short, smaller-diameter, pieces of tubing included in the kit. These slide into the end of the bracelet tubing. Don’t slide it in! You want to leave half out (This is how you’ll close the bracelet later). It’s a bit of a tight fit (so it doesn’t leak), you may want to push it against a table to make it easier or ask an adult for help with this step
TIP : If it’s a little hard to slide it in, get the connecting piece wet first. The water will help it slide more easily.
TIME TO DECORATE!
To decorate the bracelet, fill the inside of the tube with any combination of
the included glitter and gems.
- C ) Take the included funnel and stick it on the end of the tube that doesn’t have the connector. Then use the funnel to add glitter and gems to the inside of the tube.
-
- D ) As you add glitter and gems, don’t fill it right to the top of the funnel. Pour in a little at a time and tap the side of the funnel to get stuff to go into the tube. (Adjust or tap the tube as needed to allow more to go in from the funnel).
TIP : Don’t overfill the bracelet or else it will clump once you add water. (About half a pack of glitter or gems is about right – or even less as it will float around the bracelet even more!) There is enough glitter and gems to create 6 bracelets. You can combine the glitter and gems any way you like to create your look.
- E ) Once you’ve added the glitter and gems you want to the bracelet tube, it’s time to fill it up with water. You can do this at any faucet (The kitchen sink is ideal as it has more space to work under)
TIP : DO NOT Use the funnel for this part. You don’t need it here, and if it gets wet you won’t be able to make another bracelet before drying it. Turn the cold water on to a small trickle, and while holding the tube in a U shape (both ends up and at the same level), slide one end under the water trickle to fill up the tube. Go slowly, you don’t want the tube to overflow and the contents to be pushed out the other end!
- F) Once the tube is full, you can connect the loose end to the connector by sliding it on. (Make sure to pinch the other end so you don’t push the connector further into that side – you want it nice and even)
TIP : Do this quickly so the water doesn’t fall out. If you don’t succeed the first time, fill the water back up and try again. (Or ask an adult for help). Dry the bracelet with a paper towel and slide it over your wrist. It’s ready for you to enjoy it!
SHOW US YOUR STUFF
We love to see your creations. Share them on social media and tag us
@PLBFUN We regularly give prizes to our fans that share
their creations. When you share, you’re entered.
PURPLE LADYBUG
Copyright: 2022 – Purple Ladybug® Made in Huizhou Manufactured for and imported by
Apurimac Co., Limited
Asia : 87-105 Chatham Rd, Tsim Sha Tsui, Kowloon, Hong Kong
North America : 4283 Express Lane Ste 755-570, Sarasota FL 34249 USA
United Kingdom : 1A Rugby Rd, #21682, Twickenham, Middlesex, TW1 1DG, UK
European Union: 1st Floor, 10 Rue de l’Arquebuse, #G6, Genève, GE 1204,
CH
WARNING:
- This toy is not intended for children under 36 months. The toy contains small parts! Risk of choking and suffocation.
- The CE Marking on the product is the manufacturer’s declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation.
- The UKCA Marking on the product is the manufacturer’s declaration that the product complies with the essential requirements of the relevant United Kingdom health, safety and environmental protection legislation.
OUR STORY
As a family-run business, our kids are our inspiration!
We are committed to making products that delight and inspire not just our own
family, but yours too. We never compromise on quality. Our award-winning
products are safe, fun, and simple to use. Our promise to you is that within
every Purple Ladybug box, a world of creativity and enjoyment awaits!. Follow
Us On Your Favorite Social Media Platform.