JBC ESHT-A Extractor Stand for Hot Air Instruction Manual

JBC ESHT-A Extractor Stand for Hot Air

Product Information

• Product Name: ESHT Extractor Stand for Hot Air
• Reference: ESHT-A
• Packing List:
• Extractor Stand: 1 unit
• Accessory Set for ESHT (Ref. 0027797):
  • Manual: 1 unit (Ref. 0027965)
  • Protectors: P2220, P2230, P2235, P4000, P4010 (1 unit each)
  • Tripods: T2050, T2250 (1 unit each)
  • Suction Tube: 1 unit (Ref. 0932330)
  • Extractors: E2184, E2064, E2052 (1 unit each)
  • Suction Cup Set (Ref. 0930110): 1 unit (includes 2 suction cups)

Product Usage Instructions

1. Placing: Position the extractor with the appropriate suction cup on the component you want to extract.
2. Heating: Heat the component using the appropriate method.
3. Extracting: Press the suction button on the extractor stand to activate the suction pump. The component will automatically lift off when the solder melts.

Note: For small components, it is recommended to use a protector + tripod. For large components, manual extractors are recommended.

Packing List

The following items are included:

• Extractor Stand ……………………………………1 unit

• Manual …………………………………………………..1 unit
  Ref. 0027965

• Accessory Set for ESHT ……………………. 1 unit

Features and Connections

JTSE Control Unit
not included, sold separately

Operation

Protectors & Extractors

Accessories

• Protectors***
  No.| Ref.| AxB (mm)| AxB (in)| No.*| Ref.| AxB (mm)| AxB (in)
  ---|---|---|---|---|---|---|---
  | P3353| 4,3 x 3| 0.16 x 0.12| | P1249| 12 x 23| 0.47 x 0.9
  | P3786| 5,2 x 5,2| 0.20 x 0.20| 44| P4000| 12,5 x 12,5| 0.49 x 0.49
  | P3352| 5,2 x 7,5| 0.20 x 0.29| | P3354| 13,2 x 13,2| 0.52 x 0.52
  | P3355| 5,2 x 9,5| 0.20 x 0.37| | P4025| 13,5 x 21,5| 0.53 x 0.85
  | P3356| 6,2 x 4,2| 0.24 x 0.16| 48| P2230| 15 x 15| 0.59 x 0.59
  | P3785| 7,2 x 7,2| 0.28 x 0.28| 60| P4010| 17 x 17| 0.67 x 0.67
  | P3784| 8,2 x 8,2| 0.32 x 0.32| | P4005| 18 x 29| 0.71 x 1.14
  | P4035| 9 x 13| 0.35 x 0.51| | P4030| 18,5 x 18,5| 0.73 x 0.73
  | P4040| 9,5 x 19| 0.7 x 0.74| | P1068| 18,5 x 24| 0.73 x 0.94
  | P4080| 9,5 x 21| 9.5 x 0.83| | P2685| 28,5 x 28,5| 1.12 x 1.12
  32| P2220| 10 x 10| 0.39 x 0.39| | P4085| 31,5 x 31,5| 1.24 x 1.24
  | P4045| 10,5 x 21| 0.14 x 0.82| | P2672| 33 x 46| 1.30 x 1.18
  | P4090| 11 x 16| 0.43 x 0.63| | P4002| 50 x 50| 1.97 x 1.97
  24| P2235| 12 x 17| 0.47 x 0.67| | P3357| 52,5 x 14| 2.06 x 0.55
• Extractors***
  No.| Ref.| AxB (mm)| AxB (in)  No.*| Ref.| AxB (mm)| AxB (in)
  ---|---|---|---|---|---|---
  52| E2052| 20 X 20| 0.79 x 0.79| | E4015| 31,5 X 31,5| 1.24 x 1.24
  64| E2064| 20 X 26| 0.79 x 1.02| | E2084| 33 X 33| 1.30 x 1.30
  80| E2184| 24 X 24| 0.94 x 0.94| | E2100| 38 X 38| 1.50 x 1.50
  | E2068| 27 X 27| 1.06 x 1.06| | E2124| 45 X 45| 1.77 x 1.77
  | E4020| 28,5 X 28,5| 1.12 x 1.12| |
• Tripods****
  Ref.| øC (mm)| øC (in)
  ---|---|---
  T2050| 39| 1.53
  T2250| 85| 3.35
• Manual extractor
  Ref.| øD (mm)| øD (in)
  ---|---|---
  E2190| 7| 0.27

Safety

It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion.

• Do not use the equipment for any purpose other than PCB rework. Incorrect use may cause fire.
• The temperature of accessible surfaces may remain high after the unit is turned off. Handle with care.
• Be careful with the fumes produced when soldering.
• Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working to avoid personal harm.
• Utmost care must be taken with liquid tin waste which can cause burns.
• This appliance can be used by children over the age of eight as well as persons with reduced physical, sensory or mental capabilities or lacking experience provided that they have been given adequate supervision or instruction concerning use of the appliance and understand the hazards involved.
• Children must not play with the appliance.
• Maintenance must not be carried out by children unless supervised.

Specifications

ESHT
Extractor Stand for Hot Air
Ref. ESHT-A

• Total Net Weight: 1.09 kg / 2.41 lb
• Total Package Dimension 320 x 140 x 120 mm / 12.60 x 5.51 x 4.72 in (L x H x W)

Complies with CE standards.
ESD safe.

Warranty

JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.

This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.

www.jbctools.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>