AV Access HDEX40-L HDMI Extender User Manual

AV Access HDEX40-L HDMI Extender

Product Information

1080P/60Hz up to 50 meters over Cat 6/6a/Cat 7 cable. Uncompressed
1080P/60Hz up to 40 meters over Cat 5e cable. HDMI 1.3b and HDCP
1.4 compliance. Independent HDMI equalization adjustment button on
the receiver. Compact size for easy installation.

Package Contents

Before you start the installation of the product, please check the package contents:

• Transmitter x 1
• Receiver x1
• Power Adapter (DC 5V 1A) x1
• IR Emitter x1
• IR Receiver (30 KHz ~ 50 KHz) x1
• Mounting Brackets (with Screws) x 4
• User Manual x 1

Transmitter Panel

powered by the transmitter.
2| Power LED| ON: The transmitter is powered on. OFF: The transmitter is
powered off.
3| HDMI In| Connect with HDMI source device
4| UTP Out| Connect to the receiver via Cat X cable.
5| IR Out| Connect to the IR emitter cable provided.

Receiver Panel

off.
3| HDMI Out| Connect a display to HDMI Out port.
4| EQ| Switch EQ to 30m or 50m, use single Cat X cable to connect the
transmitter and receiver.
5| UTP In| Connect to the receiver via Cat X cable.
6| IR In| Connect IR Receiver cable to IR In Port.

Installation and Application

Brackets Installation
Note: Before installation, please ensure the kit is disconnected from the power source.

1. Attach the installation bracket to the enclosure using the screws that were provided in the package separately. The bracket height can be adjusted up/down or bracket face up or down. As shown
   in the following figure:

2. Attach the brackets to the surface you want to hold the transmitter/receiver against using the screws (provided by others).

Application
Note: Make sure Cat X cable is no more than 30 or 50 meters according to EQ switch you selected.

1. Connect an HDMI source to HDMI In port on the transmitter.
2. Connect IR Emitter cable to IR Out port on the transmitter.
3. Switch EQ to 30m or 50m, use single Cat X cable to connect the transmitter and receiver.
4. Connect a display to HDMI Out port on the receiver.
5. Connect IR Receiver cable to IR In Port on the receiver.

Specifications

Technical| Video Signal Type| Input/Output Resolution Support| Audio Format Supported| Max Data Rate
---|---|---|---|---
HDMI 1.3b with HDCP 1.4| 1920x1080i, 1920x1080P, 1280x720P, 720x568P, 720x568i,
720x480P, 720x480i| PCM 2.0| 6.75 Gbps
General| Operating Temperature| Storage Temperature| Humidity| Power Consumption (Maximum)| Device Dimensions (W x H x D)| Product Weight
---|---|---|---|---|---|---
| | | | 2.5W (pair)| |

Transmission Distance
Note: We recommend the use of T568B straight-through Category cables.

Warranty
Products are backed by a limited 1-year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicable.

1. The original serial number (specified by AV Access Technology Limited)

Thank you for choosing products from AV Access.

Introduction

Overview

HDEX40-L is a 50m 1080P cost-effective HDMI extender and offers the extension of full HD video, 2CH audio and IR pass through up to 50m/164ft along a single Cat X cable. With a feature set including transmission of uncompressed 1080p HD video@60Hz, stereo audio, one-way IR pass through and PoC (Power over Cat X cable). With the PoC inside, the receiver can be powered by a transmitter without an additional power adaptor. The Receiver offers manual EQ DIP settings to adjust transmissions by distance for optimal signal delivery to the display.

Features

• Simple and cost-effective HDMI Extender.
• Uncompressed 1080P/60Hz up to 50 meters over Cat 6/6a/Cat 7 cable.
• Uncompressed 1080P/60Hz up to 40 meters over Cat 5e cable.
• HDMI 1.3b and HDCP 1.4 compliance.
• Independent HDMI equalization adjustment button on the receiver.
• Compact size for easy installation.

Package Contents

Before you start the installation of the product, please check the package contents:

• Transmitter x 1
• Receiver x1
• Power Adapter (DC 5V 1A) x1
• IR Emitter x1
• IR Receiver (30 KHz ~ 50 KHz) x1
• Mounting Brackets (with Screws) x 4
• User Manual x 1

Panel  Transmitter

receiver can be powered by transmitter.

2| Power LED| ON: The transmitter is powered on.

OFF: The transmitter is powered off.

3| HDMI In| Connect with HDMI source device
4| UTP Out| Connect to the receiver via Cat X cable.
5| IR Out| Connect to the IR emitter cable provided.

Receiver

receiver through this port.

2| Power LED| ON: The receiver is powered on.

OFF: The receiver is powered off.

3| HDMI Out| Connect an HDMI display.

4

|

EQ

| Manual EQ DIP Switch: adjust the maximum transmission distance to 30m or 50m manually.

30m: The length of Cat X cable connected is less than or equal to 30m;

50m: The length of Cat X cable connected is more

than 30m and less than or equal to 50m;

5| UTP In| Connect to transmitter via Cat X cable.
6| IR In| Connect to IR receiver cable provided.

Installation and Application

Brackets Installation

Note: Before installation, please ensure the kit is disconnected from the power source.

1. Attach the installation bracket to the enclosure using the screws that were provided in the package separately. The bracket height can be adjusted up/down or the bracket face up or down. As shown in the following figure:
2. Attach the brackets to the surface you want to hold the transmitter/receiver against using the screws (provided by others).

Application
Note: Make sure Cat X cable is no more than 30 or 50 meters according to the EQ switch you selected.

Specifications

Technical

Video Signal Type| HDMI 1.3b with HDCP 1.4
Input/Output Resolution Support| 1920x1080i8, 1920x1080P8, 1280x720P8,

720x568P8, 720x568i8 ,720x480P8, 720x480i8

8 = 60 Hz

Audio Format Supported| PCM 2.0
Max Data Rate| 6.75 Gbps
General

Operating Temperature| 0°C to + 45°C (32 to + 113 °F)
Storage Temperature| -20 to +70°C (-4 to + 158 °F)
Humidity| 20% to 90%, non-condensing
Power Consumption (Maximum)| 2.5W (pair)
Device Dimensions

(W x H x D)

| 70 mm ×20 mm ×70.2 mm/

2.75” x 0.79” x 2.76”

Product Weight| Transmitter/Receiver: 0.2kg/0.44lb
Cable Type| Range| Supported Video
---|---|---
HDMI| Input/Output: 5m/16ft| 1080P@60Hz
Cat 5e| 40m/131ft| 1080P@60Hz
Cat 6/6a/7| 50m/164ft

Transmission Distance
Note: We recommend the use of T568B straight-through Category cables.

Warranty

Products are backed by a limited 1-year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicable.

1. The original serial number (specified by AV Access Technology Limited) labeled on the product has been removed, erased, replaced, defaced or is illegible.
2. The warranty has expired.
3. The defects are caused by the fact that the product is repaired, dismantled or altered by anyone that is not from an AV Access Technology Limited authorized service partner. The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the applicable User Guide.
4. The defects are caused by any force majeure including but not limited to accidents, fire, earthquake, lightning, tsunami and war.
5. The service, configuration and gifts promised by the salesman only but not covered by the normal contract.
6. AV Access Technology Limited reserves the right for interpret of these cases above and to make changes to them at any time without notice.

Thank you for choosing products from AV Access. If you have any questions, please contact us via the following emails: General Enquiry: info@avaccess.com
Customer/Technical Support: support@avaccess.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>