DELTA HCHO 7 UNO IAQ Sensor Installation Guide
- June 13, 2024
- Delta
Table of Contents
UNO IAQ Sensor Installation Guide
Product Development Team, BABG
Aug. 25 2023 ver.02
HCHO 7 UNO IAQ Sensor
Placement
UNO lite is recommended to be installed below condition and at a height of 0.8~1.5 meters (2.56~ 4.8 feet ).
Located at least 5 meters(~16 feet) away from operable windows, doors and diffusers
Delta Confidential
Step 1
Select suitable Wall Mount Frame to meet different Junction
Plastic Wall Mount Cover Dimension
Plastic well module cradle is an accessory that comes with the product (Both UNO next and UNO lite).
Small Wall Mount frame Dimension
Delta Part No.: 3487312702
Compact Wall Mount Frame for 1-Gang Junction Boxes (Compatible with US, EU, &
TW Junction Box)
Delta Part No.: 3487312702
This well module frame is an accessory that comes with the product (UNOlite).
Large Wall Mount frame Dimension
Delta Part No.: 3994041800
The Wall Mount Frame and Cover for China 86 or 2-Gang Junction Boxes
(Compatible with US,
EU, & TW Junction box)
Delta Part No.: 3994041800
Step 1.1
Install small Wall Mount frame with 1 Gang Embedded Junction Box
Step 1.2
Install large Wall Mount Kit with 2 Gang
Embedded Junction Box
Step 1.3
Install large Wall Mount cover with Junction Box Installation
Step 2
Insert wire cables to terminal plug
Step 3
Insert terminal plug and DC power plug to UNO lite
Step 4
Mount UNO lite on four buckles of Wall Mount Fix UNO lite with M4 screw by Hex
screw driver
Finished Installation
Installation Guide for UNO IAQ Sensor
Step 1: Determine Installation Height
The optimal installation height for the product is between 0.8 to 1.5 meters
(2.56 to 4.8 feet) from the ground.
Step 2: Choose Installation Method
Option A: Wall Mount Installation
Utilize the wall mount provided in the package.
The wall mount is designed with screw hole spacing (60mm and 84mm) compatible
with power boxes in various countries.
Ensure the power box is horizontally installed, following the configuration
depicted in Figure 1.
Option B: Power Box Installation Alternatively, install the product in a power
box.
Step 3: Arrange Power and Data Lines
Before proceeding with installation, ensure that power supply and data lines
are laid out as per the specifications.
Step 4: Mount the Product
Follow these steps:
Refer to Figure 2 for guidance.
Attach and secure the wall mount, confirming all four buckles are properly
affixed.
Step 5: Secure Installation
Proceed as follows:
Refer to Figure 3.
Use an M4 hex socket screws along with a hexagonal screwdriver to fasten the
product securely in place.
Smarter. Greener. Together.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>