DCU 34153500 Bone-Conduction Bluetooth Headset User Manual

DCU 34153500 Bone-Conduction Bluetooth Headset

Product Information

• Product Name: Bone-conduction Bluetooth headset
• Model Number: 34153500-34153510
• Bluetooth Version: 5.0
• Weight: 31g
• Battery: 230mAh
• Charging Time: About 2 hours
• Playtime: 8 hours at 70% volume
• Microphone Sensitivity: -42 dB
• Waterproof Rating: IPX5
• Bluetooth Distance: 10 meters
• Input: 5V/500mA
• Supported Protocols: A2DP, AVRCP, HSP, HFP

Product Usage Instructions

1. Turn On: Hold down the button [+/play] for about 3 seconds. When the light flashes alternately red and blue, it means the earphone has been turned on.
2. Bluetooth Connection: When the headset is turned on properly for the first time, the indicator light turns blue-red and the headset enters the Bluetooth pairing status. Search for “dcu_bone_conduction” in the Bluetooth settings of your device, click connect, and when the connection is successful, the LED light turns off.
3. Replacement of Matching Equipment and Reconnection: To replace or reconnect with a different device, disconnect the current paired device from Bluetooth. The headset indicator will flash red and blue alternately. On the other device, search for “dcu_bone_conduction” in the Bluetooth settings and click to connect. The DCU bone conduction headphone supports automatic reconnection with the last connected device after normal power-on.
4. Turn Off: Hold down the [+/play] button for about 3 seconds. The indicator light will go out.
5. Charging: Use the provided USB-C charging cable to charge the headphones. After Bluetooth connection with your phone, you can see the headphone battery on the screen. Charge the headphones when the battery is low, but do not let them discharge completely. Note: Use 5V/1A or 5V/2A maximum charging devices such as standard mobile phone chargers. Do not use fast charging chargers.

For any technical or customer service inquiries, please contact
DCU Advance Tecnologic:

• Address: c/ Industria 34, 17005-Girona (Spain)
• Phone: +34972244105
• Email: [email protected]
• Website: www.dcutec.com

Thank you very much for purchasing this headphone, the DCU team has been working hard to offer you a comfortable, beautiful and functional headphones.
If you have any questions that this manual cannot solve, we will be happy to assist you, you can write to [email protected] and in less than 24 hours we will answer you.
We wish you enjoy it!
If you want to know a little more, go to www.dcutec.com or visit our Instagram profile @dcutecnologic. Sometimes we do raffles.

PARTS LIST

SCHEMATIC DIAGRAM AND ACCESSORIES

1. Indicator light
2. USB-C charging port
3. Microphones
4. Key [+/play]
5. Key [-]
6. Memory metal back hang

TURN ON:
Hold down the button [+/play] for about 3 seconds. When the light flashes alternately red and blue it means the earphone has been turned on.
BLUETOOTH CONNECTION:
When the headset is turned on properly for the first time, the indicator light turns blue-red and the headset enters the Bluetooth pairing status.  Search for “dcu_bone_conduction” in the Bluetooth  setting, click connect, when the connection is successful the led light turns off.
REPLACEMENT OF MATCHING EQUIPMENT AND RECONNECTION:
Disconnect the current paired device from Bluetooth, the headset indicator flashes red and blue alternately. With  the other device search for “dcu_bone_conduction” in the Bluetooth settings and click to connect.  The DCU bone conduction headphone supports automatic back connection and matching device, so it will be automatically connected after normal power-on. For the last connected device, make sure that the Bluetooth is open properly.

TURN OFF:
Hold down [+/play] button for about 3 seconds. Indicator light goes out.
CHARGING:
Use the provided Type-C cable to charge the headphones. After Bluetooth connection with your phone, you can see the headphone battery on the screen. Charge the headphones when the battery is low, do not let# them discharge completely.Note: 5V/1A or 5V/2A maximum charging devices such asstandard mobile phone chargers can be used. Do not use fast charging chargers.
INSTRUCTIONS FOR:

• Long press [+/play] button: turn on/off the headphones

• Long press the [+] button for 1 second to wake up Siri

• Long press [-] to disconnect the Bluetooth device
  State of play

• Double-click [+/play] button to pause the playback

• Double click [-] button for the next song

• Click [+] button to increase volume

• Click [-] button to decrease volume

Call status

• Double-Click [+/play] button to answer the call.

• Double-Click [+/play] button to end call.

• Long press [+/play] button to refuse to answer the call.
  Indicator light description

• Alternate red and blue: pairing state.

• Blue flashes: Connect successfully.

• The Red light is always on: charging.

• The Blue light is always on: full charge.

PRODUCT PARAMETERS

• Bluetooth version: 5.0
• Weight: 31g
• Battery: 230mAh
• Charging: About 2 hours
• Playtime: 8h 70% volume
• Microphone: – 42 db
• Waterproof: IPX5
• Distance Bluetooth: 10 meters
• Input: 5V/500mA
• Protocol: A2DP, AVRCP, HSP, HFP

TECHNICAL AND CUSTOMER SERVICE

• DCU Advance Tecnologic c/ Industria 34, 17005-Girona (Spain)
• T. +34972244105
• Email: [email protected]
• www.dcutec.com
• www.dcutec.com

References

• DCU Tecnologic

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>