Great Asia VOLT-V010-2 Tablet PC User Guide
- June 16, 2024
- Great Asia
Table of Contents
Great Asia VOLT-V010-2 Tablet PC
Product Information
Specifications
- DC Voltage : Supports DC voltage.
- Indoor Use : Designed for indoor use only.
Usage Instructions
DC Voltage
This product is designed to support DC voltage. It is important to ensure
that the voltage input matches the specifications provided by the
manufacturer. Incorrect voltage input may damage the product and void the
warranty.
Indoor Use
This product is intended for indoor use only. It should not be exposed to
extreme temperatures, moisture, or direct sunlight. Using the product outdoors
or in harsh environments may result in malfunction and can be hazardous.
RECYCLING
Do not dispose of this electric appliance as unsorted municipal waste. It
is important to use separate collection facilities for proper disposal.
Contact your local government or recycling center for information on available
collection systems. Disposing of electric appliances in landfills or dumps can
lead to hazardous substances leaking into the groundwater and food chain,
posing risks to health and well-being.
Polarity of D.C. Power Connector
When connecting the power supply to this device, ensure that the polarity
of the D.C. power connector is correct. Incorrect polarity may cause damage to
the device and void the warranty. Please refer to the user manual or contact
customer support for instructions on proper polarity.
FCC Compliance
This device complis with part 15 of the FCC Rules. It operates under the
following conditions
- The device may not cause harmful interference.
- The device must accept any interference received, including interference that may cause undesired operation.
FCC Warning
Any changes or modifications to the device that are not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment. It is important to consult the manufacturer or
authorized service center before making any modifications to the device.
RF Exposure Requirement
This device has been evaluated to meet general RF exposure requirements. It
can be used in portable exposure conditions without any restrictions. However,
it is recommended to follow safety guidelines and maintain a safe distance
from the device during operation to minimize potential exposure.
FAQ
-
Q: Can this product be used outdoors?
A: No, this product is designed for indoor use only. Using it outdoors may result in malfunction and can be hazardous. -
Q: How should I dispose of this product?
A: Do not dispose of this electric appliance as unsorted municipal waste. Please use separate collection facilities for proper disposal. Contact your local government or recycling center for information on available collection systems. -
Q: What happens if I connect the power supply with incorrect polarity?
A: Connecting the power supply with incorrect polarity may cause damage to the device and void the warranty. Always ensure that the polarity of the D.C. power connector is correct before connecting the power supply. -
Q: Can I make modifications to the device?
A: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. It is important to consult the manufacturer or authorized service center before making any modifications to the device.
Attention
This handbook contains important security measures and the correct use of the product information, in order to avoid accidents. Pls make sure to reading the manual carefully before use the device.
- Please don’t be in high temperature, moisture or very dust place
- Please don’t be in high temperature, Especially in summer don’t put the device in the car when Windows closed.
- Avoid fall or Violent collision of the device, don’t make the TFT display screen were violent tremor, This could cause TFT display screen abnormal or damage.
- Please choose the appropriate volume, Use headphones should not be too big volume, If feel tinnitus, Lower the volume or stop using it
- Please charge In the following condition,
- The battery power ICONS shows have no power
- The system automatically shut off, startup after power off soon.
- Operation buttons no response
- The machine that the top right corner show red icons
- When the device in the format or ongoing upload and download file, please don’t suddenly disconnect, This could cause application error.
- For those who because of damage to the product, repair, or other causes of erased the memory, The company shall not be liable for any responsibility, please follow the user manual for the standardized operation to use the device.
- Don’t disassemble the product, don’t use alcohol. Thinner or benzene to scrubbing products
- Don’t use the device one of the place of prohibit to use electronic equipment in regional (such as the plane)
- Please don’t using the Tablet PC when you in driving or walking down the street,
- USB just only be used for data transmission
The company reserves the right to improve product, products specification and
design have any change, The information is subject to changes without prior
notice.
(This tablet is no waterproof function)
[Remark] All pictures in this manual is just for your reference. products
specification and design have any change, The information is subject to
changes without prior notice.
DC voltage
For indoor use only
RECYCLING
Do not dispose of electric appliances as unsorted municipal waste, use
separate collection facilities. Contact your local government for information
regarding the collection systems available. If electric appliances are
disposed of in landfills or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your health and well-being.
Polarity of d.c. power connector
Desk
Touch panel Capacitive touch panel:
In The Operation, to click, dragging on the touch panel
POWER
startup: Long Press and hold the power button, the system will enter the main
interface
shutdown: In the main menu interface, Press the power button about 5 second to
shutdown, The system can hint “power off” option, Clike”ok*. you can safely
shut down.
Lock screen: Short press Power button to lock screen or unlock screen.
Remark
- When power is empty, system will shut down automatically.
- Illegal turn off the device, restart will scan and restore the disk.it may take longer time to enter into system
ВАСК
Short Press BACK button will return the last interface,
MIC Recording
Volume +, Volume-
The buttons on top Volume + Volume-achieve changes in the volume.
Earphone Jack
3.5 mm standard earphone jack
TF car
TF-CARD solt : external T-FLASH card
Mini US
Mini USB jack: you can use it to connect the computer for data
transmission, charging and external connection USB flash drive
DC Adapter
For charging. your tablet battery
Recovery
When the Tablet under the condition of the crash, upgrade firmware.
First use
Battery management and charge
Before first use, please set the device’s battery is fully charged Just need
to connect the adaptor or USB interface, then you can charge
The first two times charging please keep about 6 hours, after that you just need 4 hours to charge.
[ Remark ] : This tablet using Built-in type polymer battery, Charge must be to choose standard adaptor (Input: AC110~240V 50/60Hz Max: 180M.. Output: DC5.0-5.5V/1.5A), this device without supply DC charging, USB interface can charge, Choose USB interface to charger. During the charging, the battery icon will scroll
When finished charging, battery icon will become green and stop rolling In order to prolong the service life of the machine, suggest use out battery power before charge it
[ Remark ]
- If you long time don’t to use this Tablet, in order to avoid power consumption caused damage, pls charge/play the battery once a month.
- After low battery shut down, connect DC adaptor, device will remind low battery, charging, need to wait some time until the battery is enough power to enter into main menu.
- Device charging should be in standby status for reach normal charging time. Because with device and screen consumption, it may cause longer charging time.
Connection with PC
U Use USB cable to connect device to PC, device will pop up the USB
connection window, click Turn on USB storage to connect to PC Into the load
mode, you can copy, delete the file on the device and the file on the memory
card.
Equipment operation interface.
Main interface describe
After startup will enter the main interface
In the main interface, you can Management main interface software ICONS
long press the icons 3 second, after the icons will bigger, then you can drag
anywhere in the interface.
Delete icons : long press the icons 3 second, drag the icons to the
Recycle Bin icon, once it become red, Loosen your hand, after that you can
delete icon.
You touch the screen keep a time, appear the dialog box” Add yo Home scereen”
as shown below-
status bar describe
The status bar above of the screen
Top left display main interface software, T-Flash card, USB connection status
and so on.
Top right display the battery, battery charge icons, current time, time,
Settings Menu, ESC button.
Use touch panel
-
Device equipped with a touch screen. Following the main touch screen area is described, and describes some of the tips for how to use the touch screen.
No matter which interface you are on the screen, can go back to main screen through pressing the soft key on the bottom right corner of the main screen. -
( Attention) The main screen soft key functions as the machine back key
-
In different applications, by tapping the back soft key on the bottom right corner on the touch screen, you can return to its interface on the up floor.
-
In different applications, by tapping the menu key on the upper right corner of touch screen, the screen will appear the operation setting interface as follows,
-
( Remark ) : The main screen soft key functions as the machine manu
In the main interface, you can touch the icon to open the APP
In different browser(file, music, video, pictures), You shift and drag the
scroll bar, so that the file list can up or down to roll.
Equipment basic set
Setting
Click setting icons enter setting interface
Silent mode, Volume, Notification selection, Screen lock sounds ringtone, Audible
Application
Manage applications
Unknown sources : Click “Unknown Sources”, then click “OK”.
Manage application: manager and uninstall Application
( Remark ] : when you Firmware Upgrade, pls close the USB connection
How to uninstall?
- Enter “setting”>”Application”> “Manage application” And then there will be installed the program list.
- Click you want to uninstall icons, will enter the following interface.
- Click Uninstall, then you can delete the application.
Privacy
Factory data reset
Storage
Remove TF card, view of the available storage space
( Remark ] : pls touch option” delete SD card”, so that can safety to romeve SD card
Language & keyboard
Setting
(Language), text input and automatic error correction options;
-
Select Language : 54 kind of national languages are available
Remark : Android system can support 54 kind of language, now Manu interface just support 14 language, -
Android keyboard: Android keyboard setting Sound on Key-press Auto-capitalization
-
Show suggestions : Display suggested words while typing
-
Auto-complete : Space bar and punctuation automatically insert highlighted word
Date & time setting
Set date, set time, Select time zone and select date format
Developer options
Choose USB work patter: OTG/HOST/SLAVE……..
About tablet
Apps Install and manage
App installer
- This Tablet can support Android
- APP in market by third party, most Apps can install in the network, can copy to NAND FLASH or SD card. Click App installer icon, will appear Install, manage, Exit options.
- Install : Click install, enter Apk install interface.
- Separately for Internal Memory disk and SD Card disk. Select the APK you would like to install, click it to install, go back to main menu, will display the installed app you just selected.
- Remark : some 3” APP must install properly by memory card ,downloaded 3″* party app may not install properly on device.
- Manage : click manage, enter third party interface Click install icon, will enter Action interface
Problem solution
Device can’t to open
- Check the battery power
- Connect adaptor first, then check again
- After charging then can’t to open, pls contact with the supplier
After startup the screen or the opening picture has been appear, the the device appear shutdown
- Power is not enough, please charge Headset can’t hear the voice
- PIs check the volume whether set to 0
- Check the music file whether damaged. Try playing other music, if the file have damaged may lead to serious noise or hop sounds.
Can copy file or play music and so on
- Pls check between computer and device is correct connection
- check the memory storage space is already full
- check the USB cable is good or not
- USB connection is disconnected
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
FCC warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.