AV Access 4KEX100-KVM 4K HDBT HDMI KVM Extender with USB 2.0 User Manual

AV Access 4KEX100-KVM 4K HDBT HDMI KVM Extender with USB 2.0 User Manual

Introduction

Overview

4KEX100-KVM is a 4K HDBaseT 2.0 extender set, which offers extension of uncompressed 4K@60Hz UHD video, analog Stereo, power, RS232 and USB 2.0 up to 100m/330ft over a single Cat 6 or above cable.

With USB 2.0 pass-through and USB Host connector in TX, and USB Device connectors in RX, it provides remote source PC control with keyboard and mouse, interactive display operation, data transmission and USB streaming over distances up to 100m. Additional features include bi-directional 3.5mm stereo pass through and one-way PoH.

Features

• Via Cat 6/6a/7 cables, 4Kx2K@60Hz output up to 100m/330ft, 1080P@60Hz up to 100m/330ft.
• Via Cat 5e cable, 4Kx2K@60Hz output up to 90m/300ft, 1080P@60Hz up to 100m/330ft.
• HDMI 1.4 with 4K@60Hz (chroma sub-sampling 4:2:0 8-bit only) and HDBT 2.0 compliance.
• One-way POH, TX (PSE) with PSU to power both TX and RX (PD).
• USB 2.0 pass through, USB-Host connector built in TX and 4 x USB-Device connector built in RX.
• High-speed USB 2.0, up to 480Mbps, pass through over HDBaseT up to 100m/330ft.
• Bi-directional analog stereo and RS232 pass-through over HDBaseT.
• Independent DIP switch for EDID management.

Package Contents

Before you start the installation of the product, please check the package contents:

• Transmitter 4KEX100-KVM x 1
• Receiver 4KEX100-KVM x 1
• DC12V 2A Power Adapter x 1
• Phoenix Male Connector (3.5 mm, 3 Pins) x 2
• USB 2.0 Type-B to Type-A Cable (L=1.5m) x 1
• Mounting Brackets (with Screws) x 4
• User Manual x 1

Panel

Front Panel

Transmitter/Receiver

• On: The device is powered on.
• Off: The device is powered off.

2| Status LED|

• Blinking slowly: The device is working properly.
• Off: The device is not working properly.

3| Link LED|

• On: HDBT Link is normal.
• Off: No HDBT Link.

Rear Panel

Transmitter

connection.
2| HDBT OUT| Connect to HDBT IN port of receiver.
3| RS232| RS232 pass through.
4| HDMI IN| Connect to an HDMI source.
5| AUDIO|

• Audio In: Connect to an audio source.
• Audio Out: Connect to an audio receiver.

6| EDID| DIP Switch for EDID Management.
7| USB HOST| Connect to USB-HOST device, such as PC.

Receiver

connection.
2| HDBT IN| Connect to HDBT OUT port of transmitter.
3| RS232| RS232 pass through.
4| HDMI OUT| Connect to an HDMI display.
5| AUDIO|

• Audio In: Connect to an audio source.
• Audio Out: Connect to an audio receiver.

6| USB DEVICE| Connect to USB devices (e.g. keyboard, mouse, USBcamera).

Installation and Application

Bracket Installation

Note: Before installation, please ensure the device is disconnected from the power source.

Steps to install the device in a suitable location:

1. Attach the bracket to the enclosure using the screws provided. The bracket is attached to the enclosure as shown.
2. Repeat step 1 for the other side of the device.
3. Mount the device on a flat and solid surface with screws (screws are not included in the package).

Application

Note:

• Disconnect all power supplies of all devices before installation.
• During the installation, connect or disconnect the cables gently.
  Connect the power
  Note: When transmitter is powered on, receiver is adapter free.
  

EDID Management

Please use the DIP Switch for EDID management:

Note: If EDID copy fails, the device will use 1080p/2ch as input EDID.

Specification

Transmitter

Video

Input Signal Type| HDMI 1.4 with 4K
Output Signal Type| HDBT 2.0
Input/Output Resolution Support| 4096×2160@24/25/30/50/60Hz,3840×2160@24/25/30/50/60Hz, 1920×1080/120Hz,1080P, 1080I, 720P, 576p, 576i, 480p
Maximum Pixel Clock| 297MHz
Audio
Audio Input/Output| 3.5mm Mini jack, stereo
Control
Control method| 1x RS232, 1x USB-Host
General
Operating Temperature| 0°C to 45°C (32°F to 113°F)
Storage Temperature| -20°C to 70°C (-4°F to 158°F)
Humidity| 10% to 90%, non-condensing
ESD Protection| Human-body Model:±8kV (Air-gap discharge)/±4kV (Contact discharge)
Power Supply| DC 12V 2A
Power Consumption(Max)| ≤12 W (pair)
Dimensions (W x H x D)| 210mm x 25mm x 90.2mm / 8.27’’ x 0.98’’ x 3.55’’
Product Weight| 0.44kg/0.97lb

Receiver

Video

Input Signal Type| HDBT 2.0
Output Signal Type| HDMI 1.4 with 4K
Video
Input/Output Resolutions Support| 4096×2160@24/25/30/50/60Hz,3840×2160@24/25/30/50/60Hz, 1920×1080/120Hz,1080P, 1080I, 720P, 576p, 576i, 480p
Maximum Pixel Clock| 297MHz
Audio
Audio Input/Output| 3.5mm Mini jack, stereo
Control
Control method| 1x RS232, 4 x USB Device
General

Operating Temperature| 0°C to 45°C (32°F to 113°F)
Storage Temperature| -20°C to 70°C (-4°F to 158°F)
Humidity| 10% to 90%, non-condensing
ESD Protection| Human-body Model:±8kV (Air-gap discharge)/±4kV (Contact discharge)
Power Supply| DC 12V 2A
Power Consumption(Max)| ≤12 W (pair)
Dimensions (W x H x D)| 210mm x 25mm x 90.2mm / 8.27’’ x 0.98’’ x 3.55’’
Product Weight| 0.46kg/1.01lbs

Transmission Distance
Note: AV Access recommends use of straight-through Category cables wired to T568B standard

4K@30Hz 4:4:4 8bit,
4K@60Hz 4:2:0 8bit
Cat 6/6a/7| 100m/330ft
HDMI| Input/Output: 15m/50ft| 1080P@60Hz
Input: 10m/33ftOutput: 15m/50ft| 4K@30Hz 4:4:4 8bit,
4K@60Hz 4:2:0 8bit

Warranty

Products are backed by a limited 1-year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicabl

1. The original serial number (specified by AV Access Technology Limited) labeled on the product has been removed, erased, replaced, defaced or is illegible.
2. The warranty has expired.
3. The defects are caused by the fact that the product is repaired, dismantled or altered by anyone that is not from an AV Access Technology Limited authorized service partner. The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the applicable User Guide.
4. The defects are caused by any force majeure including but not limited to accidents, fire, earthquake, lightning, tsunami and war.
5. The service, configuration and gifts promised by salesman only but not covered by normal contract.
6. AV Access Technology Limited preserves the right for interpretation of these cases above and to make changes to them at any time without notice.

Thank you for choosing products from AV Access.

If you have any question, please contact us via the following emails:
General Enquiry: info@avaccess.com
Customer/Technical Support: support@avaccess.com

References

• AV Access | Quality & Budget Assured Pro AV Product Manufacturer
• AV Access | Quality & Budget Assured Pro AV Product Manufacturer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>