KINGFISHER FPPBC25-6 Petrol Brush Cutter User Manual
- June 13, 2024
- KingFisher
Table of Contents
KINGFISHER FPPBC25-6 Petrol Brush Cutter
Product Information
The product is a 25.4cc Petrol Brush Cutter. It comes with various parts and components as listed in the exploded diagram and parts list below.
Exploded Diagram
- Part ID : Unique identification number for eachpart
- Apelson PN : Apelson part number
- MPN : Manufacturer part number
- Part Description : Description of each part
- Qty : Quantity of each part required
Parts List
| Part ID | Apelson PN | MPN | Part Description | Qty |
|---|---|---|---|---|
| 1-1 | 600113330 | 600113330 | SPARK PLUG | 1 |
| 1-2 | P000400000 | 600113310 | CYLINDER | 1 |
| 1-3 | P000602800 | 905005 | GASKET OF CYLINDER | 1 |
| 1-4 | P000502000 | 600113260 | PISTON RING | 1 |
| 1-5 | P000400100 | 600113250 | PISTON | 1 |
| 1-6 | P000501900 | 600113240 | PISTON PIN | 1 |
| 1-7 | P800500200 | 943004 | PISTON PIN RETAINER | 1 |
| 1-8 | P010100000 | 900032 | ROD ASM | 1 |
| 1-9 | P010100100 | 600113200 | PISTON AND ROD ASM | 1 |
| 1-10 | P210100000 | 900046 | CRANKCASE ASM | 1 |
| 1-11 | P000701600 | 600113340 | BOLT M6X20 | 3 |
| 1-12 | P200600100 | P200600100 | GASKET OF CRANK CASE | 1 |
| 1-13 | P000200100 | 911009 | CRANKCASE COVER | 1 |
| 1-14 | PB00700400 | 918007 | BOLT M5*18 | 4 |
| 1-15 | P000502500 | 600133120 | TUBE | 1 |
| 1-16 | P000702500 | 600133130 | WASHER 10 | 1 |
| 1-17 | P000001600 | 600132000 | FLYWHEEL ASM | 1 |
| 1-18 | P000701000 | 600112060 | BOLT M5X23 | 2 |
| 1-19 | P000001300 | 600112051 | IGNITION APPARATUS | 1 |
| 1-20 | P000003100 | 900448 | WIRE | 1 |
| 1-22 | P000200000 | 911019 | FUEL TANK | 1 |
| 1-23 | P010100200 | 900033 | OIL PIPE ASM | 1 |
| 1-24 | P000300300 | 600116070 | CUSHION OF FUEL TANK | 4 |
| 1-25 | P010100300 | 900047 | FUEL TANK CAP ASM | 1 |
| 1-26 | GP0000002472 | 941070 | FUEL TANK CAP | 1 |
| 2-2 | P000000100 | 600565322 | EXHAUST | 1 |
| 2-3 | P000500900 | 600565330 | HOUSING OF EXHAUST | 1 |
| 2-4 | P000503400 | 600565350 | EXHAUST RETAINER | 1 |
| 2-5 | P000701800 | 600114031 | BOLT M5X56 | 2 |
| 2-10 | P000000400 | 900139 | CARBURETOR | 1 |
| 2-12 | P000502300 | 600115010 | CHOKE LEVER | 1 |
| 2-13 | P000501600 | 600115070 | CHOKE SPRING | 1 |
| 2-14 | P000702000 | 600115060 | WASHER Ø5XØ13.5 | 1 |
| 2-16 | P000600900 | 600115130 | SPONGE | 1 |
| 2-17 | P000200500 | 600115110 | COVER OF AIR FILTER | 1 |
| 3-1 | P000300000 | 600310010 | DAMPLING SLEEVER | 1 |
| 3-2 | P001701500 | 701300021 | SCREW M5X28 | 4 |
| 3-3 | P000702300 | 600118080 | CROSSHEAD SCREW M5X20 | 2 |
| 3-4 | P001700500 | 201002030 | TAPPING SCREW M5X13 | 1 |
| 3-5 | P000201800 | 600138310 | CLUTCH COVER | 1 |
| 3-6 | P000702600 | 600138350 | COACH NUT M5 | 2 |
| 3-7 | P000000600 | 900001 | CLUTCH DISC | 1 |
| 3-8 | P000703300 | 908010 | WASHER 8 | 1 |
| 3-9 | P000001900 | 900002 | CLUTCH DRIVER | 1 |
| 3-10 | P000603000 | 904001 | RETAINER | 1 |
| 3-11 | P001701600 | 701300031 | BOLT CROSSHEAD M5X23 | 4 |
| 3-12 | GP0000002473 | 941069 | STARTER HANDLE | 1 |
| 3-14 | P000001500 | 600118090 | STARTER SPRING ASM | 1 |
| 3-15 | P000201400 | 600118030 | STARTER WHEEL | 1 |
| 3-16 | P000603300 | 915016 | STARTER ROPE | 1 |
| 3-17 | P000502900 | 600158061 | STARTER RETAINER B2 | 3 |
| 3-18 | P000702200 | 600118070 | SCREW M4X12 | 1 |
| 3-20 | P000202200 | 901049 | BACK COVER | 1 |
| 3-21 | P000702400 | 600118220 | SCREW M5X16 | 3 |
| 4-1 | P000202600 | 901247 | CONTROL HANDLE LEFT | 1 |
| 4-3 | P000502700 | 600139170 | TRIGGER SPRING | 1 |
| 4-4 | P110200106 | 600119410 | SWITCH | 1 |
| 4-5 | P001200501 | 901095 | TRIGGER | 1 |
| 4-6 | P000202700 | 901248 | CONTROL HANDLE RIGHT | 1 |
| 4-7 | P000702700 | 600139010 | TAPPING SCREW ST3.5X15 | 3 |
| 4-8 | P000002100 | 900058 | TRIGGER CABLE | 1 |
| 4-9 | P000002300 | 900492 | WIRE | 1 |
| 4-10 | P000201600 | 600119060 | WAVE TUBE A 245 | 1 |
| 4-11 | P001702300 | 908011 | CROSSHEAD SCREW M5X8 | 1 |
| 4-13 | GP0000002474 | 900045 | SECONDDARY HANDLE ASM | 1 |
| 5-1 | P001000101 | P001000101 | SHAFT COUPER ASM | 1 |
| 5-2 | P000703200 | 908022 | SCREW M5X10 | 1 |
| 5-6 | GP0000002475 | 901097 | RUBBER TUBE Φ24X3X110 | 1 |
| 6-2 | GP0000002476 | 900038 | GEAR HOUSING ASM | 1 |
| 6-3 | P011700000 | 203001011 | SCREW NO.10-24X13 | 3 |
| 6-4 | P011500500 | 600314020 | SPACER | 1 |
| 7-1 | GP0000002477 | 600383011 | INSIDE-SAFEGUARD | 1 |
| 7-2 | GP0000002478 | 900042 | OUTSIDE SAFETY GUARD ASM | 1 |
| 8-1 | GP0000002479 | 600412150 | CONNECTING | 1 |
| 8-2 | GP0000002480 | 900043 | TRIM HEAD ASM LEFT | 1 |
| 8-4 | P021500600 | 600324060 | SPRING | 1 |
| 8-6 | GP0000002481 | 900044 | KNOB ASSEMBLY LEFT | 1 |
| 9-1 | P011500600 | 600314030 | BLADE SEAT | 1 |
| 9-2 | GP0000002482 | 903088 | METAL BLADE | 1 |
| 9-3 | P011500700 | 600314040 | BLADE RETAINER | 1 |
| 9-4 | P001701900 | 908019 | NUT 10 LEFT | 1 |
| 10-1 | P012500700 | 903086 | WRENCH | 1 |
| 10-2 | P012500200 | 600369030 | SCREW DRIVER T25 | 1 |
| 10-3 | P012500300 | 600389030 | INNER HEX SPANNER 5 | 1 |
| 10-4 | GP0000002483 | 906034 | INNER HEX SPANNER 4 | 1 |
| 10-5 | P002000200 | 900420 | SHOULDER BELT | 1 |
| 10-6 | PB02200100 | 911059 | RATIO BOTTLE | 1 |
| 10-7 | GP0000002484 | 901071 | BLADE SHEATH | 1 |
Product Usage Instructions
- Assemble all the listed parts according to the exploded diagram.
- Make sure to tighten all the bolts and screws securely.
- Ensure that the spark plug is properly installed and connected.
- Fill the fuel tank with the appropriate fuel mixture as specified in the user manual.
- Check the oil pipe assembly and make sure it is properly connected.
- Attach the clutch cover and clutch disc to the designated area.
- Install the starter handle, starter spring, starter wheel, and starter rope.
- Connect the control handles on the left and right sides.
- Attach the trigger, switch, and trigger cable to the control handles.
- Connect the wave tube A 245 to the control handles.
- Attach the secondary handle to the designated area.
- Install the shaft coupler assembly.
- Attach the gear housing and spacer.
- Mount the inside-safeguard and outside safety guard.
- Connect the trim head assembly on the left side.
- Follow all safety precautions and guidelines provided in the user manual before operating the brush cutter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>