JLL IC350 PRO Exercise Bike Instruction Manual
- June 13, 2024
- JLL
Table of Contents
JLL IC350 PRO Exercise Bike
Product Information
The product is an exercise bike, specifically the JLL IC350 PRO model. It comes with various features and components that are designed to provide a safe and effective workout experience. The bike is pre-assembled and tested at the factory, making it easy to put together. Basic tools are required for the assembly process, and a Tools Pack is included in the package to assist with the assembly.
Contents of the Box
The box contains the following items
- Exercise Bike Base
- Vertical Seat Post
- Handlebar Post
- Manual
- Pedals x2
- Saddle
- Monitor
- Tools Pack
- Front and Rear Stabilisers
Assembly Instructions
To assemble the JLL IC350 PRO exercise bike, please follow these steps
Step 1: Attaching Stabilisers and Bottle Holder
- Attach the front and rear stabilisers to the main frame using 4 carriage bolts, 4 flat washers, and 4 domed nuts.
- Attach the bottle holder to the side of the frame using the screws provided.
Step 2: Attaching Seat Post and Saddle
- Slide the vertical seat post into the frame and secure it using the spring-loaded knob.
- Attach the horizontal seat post and secure it using the L-shaped knob.
- Add the saddle on top of the seat posts and tighten the nuts on both sides.
Step 3: Attaching Handlebar Post and Handlebars
- Slot the handlebar post into the frame and secure it using another spring-loaded knob.
- Add the handlebars on top of the handlebar post and secure them using another L-shaped knob.
- Add the monitor to the bracket using the screws provided and connect the sensor wires.
Once all the steps are completed, your JLL IC350 PRO exercise bike will be fully assembled and ready for use.
EXPLODED DIAGRAM
Safety Instructions
Please pay attention to the following instructions before operating this bike.
USER SAFETY PRECAUTIONS
PRIOR TO USE
- Assemble the bike according to the instruction manual.
- Consult your doctor before beginning any exercise program.
- Read instructions.
- Read warning labels.
- Read emergency stop procedures.
- Maximum user weight is 125kg/ 19.68 St.
- Inspect unit. If damaged, DO NOT USE.
- Ensure every bolt and screw is securely tightened.
DURING USE
- DO NOT use for stretching and DO NOT attach straps or other devices.
- DO NOT allow children aged 12 or younger to be on or near the machine.
- Stop exercising if you feel faint, dizzy, or encounter pain.
- Keep all clothing and accessories clear of moving parts.
- DO NOT jump onto the exercise bike.
WARNING
Keep water and liquids away from electrical parts.
EXERCISE SAFETY PRECAUTIONS
- Use sports clothes and gym shoes.
- DO NOT use with bare feet.
- This model should only be used at home, DO NOT use for commercial purposes.
FACILITY SAFETY PRECAUTIONS
- DO NOT operate this bike in damp or wet locations.
- Use caution when getting on or off the bike.
- Check the exercise bike for worn or loose components before each use. DO NOT use until worn or damaged parts are replaced.
- Maintain regularly. Refer to Preventive Maintenance chapter.
- DO NOT use the bike if : (1) the bike is not working adequately or (3) the bike has been dropped or damaged.
- DO NOT use the exercise bike outdoors.
- Read the instruction manual completely before using the bike.
- Ensure all users wear appropriate footwear on JLL® equipment.
- Set up and operate the bike on a level surface. DO NOT operate in small restricted areas or on plush carpet.
- As far as possible provide the following clearances: 0.5 m at each side and 2 m at the back. Be sure your exercise bike is clear of walls, equipment and other hard surfaces.
- Modifications can be made to the bike if necessary however, they must not damage the original bike itself. Any queries can be answered by our customer service team on 0121 328 7507 – 0800 6123 988.
- All the data displayed by the monitor is for reference purposes only.
WARNING STICKERS
Warning stickers indicate a potentially hazardous situation which, if not
avoided, could result in death or serious injury. Carefully read the following
caution and warning labels before using the unit.
WARNING
It is strictly forbidden to touch any moving parts of the bike.
WARNING
Keep small children and pets a safe distance from bike when in use.
Assembly
PREPARING SITE
To find the ideal location to set up this bike, ensure that
-
Area is well illuminated and well ventilated.
Surface is level. -
There is enough space to access the unit and emergency dismount. If it is possible, keep the following clearances: 0.5 m at each side and 2 m at the back.
-
The bike is placed in an environment with a relative humidity range of 30-50%. Please ensure the temperature is kept constant. Do not use in a moist or damp environment as this may impact on the integrity and performance of the machine.
DIAGRAM
CONTENT LISTING
See diagram (left) and content listing (below) for the exercise bike box
contents. See Customer Service chapter for contact information if any parts
are missing.
BOX
- CONTENTS
- TOOLS PACK
IC350 PRO ASSEMBLY
The bike has been assembled and tested at the factory, so you shouldn’t have
any problems putting all the parts together. Components are designed to fit
together, and only basic tools are required for the assembly process. Inside
the box you will find a Tools Pack (Hex Allen Key, Multi-tool, Washers and
Bolts). See previous page.
To assemble your JLL IC350 PRO please follow these easy steps
STEP 1
Attach the front and rear stabilisers to the main frame using 4 carriage
bolts, 4 flat washers and 4 domed nuts.
Next, attach the bottle holder to the side of the frame using two screws found
in the frame.
STEP 2
Slide the vertical seat post into the frame and secure using the spring loaded
knob. Then attach the horizontal seat post and secure using the L shaped knob
and lastly add the saddle on top and tighten the nuts on both sides.
STEP 3
Slot the handlebar post into the frame and secure using another spring loaded
knob. Then add the han-dlebars on top and secure using another L shaped knob.
Lastly, add the monitor to the bracket using the screws found in the back of
the monitor and connect the sensor wires.
STEP 4
Finally, attach the right and left pedals, each pedal and crank will have a
corresponding R and L label. Turn the right pedal clockwise and the left anti-
clockwise to avoid cross threading.
Please do not over tighten as this can cause bearing issues in the pedal.
WARNING: HEAVY EQUIPMENT
- It is recommended that at least two people lift, move and assemble the bike.
- Use safe lifting methods.
MONITOR CONFIGURATION
| 1 | Down Button | 3 | Up Button |
|---|---|---|---|
| 2 | Enter Button |
TESTING THE BIKE OPERATION
Use the following instructions to test the resistance and correct operation of
the bike.
- Without anyone on the bike, turn the resistance dial both clockwise and anti-clockwise and check to see if the magnets moves closer or further away from the flywheel.
- Now sit on the bike and begin to pedal, again turn the resistance dial in both directions and check to feel the difficulty of pedalling changing.
- Whilst pedalling press down the resistance dial to check the emergency stop function.
- Whilst pedalling on the bike make sure there are no noise issues or wobbling coming from the bike.
SPECIFICATIONS
Display| LCD Displays : Time, distance, calories, RPM, pulse, speed
and scan mode.
---|---
Transport| Built-in wheels.
**Flywheel| 7kg/15lbs flywheel which allows a smooth ride for
beginners or a chal- lenging and tough workout for serious athletes.
Resistance| Magnetic resistance offers a tough but smooth and quiet
workout.
Safety| Emergency stop feature.
Crank| 3 piece crank system on the pedals making it stronger and more
reliable.
Seat| Padded seat for your comfort.
Pedals| Fitted pedals with secure foot cage.
****Handlebars| Ergonomic adjustable handlebars can be moved vertically
and horizontally.
Maximum User Weight| 125 kg, 19.68 St or 275.5 lb
Occupying Area| 103 cm (Length) x 54 cm (Width) x 122 cm (Height)
Packaging Dimensions| 107 cm (Length) x 19.5 cm (Width) x 85 cm (Height)
Gross Weight| 42kg
Net Weight**| 37kg
Operation
Read all instructions, warnings and safety procedures located in the Safety chapter before using the bike.
EMERGENCY STOP FUNCTION
The resistance dial also functions as the emergency stop. In an emergency
situation, press down firmly on the dial, this will cause the flywheel to come
to a stop.
DATA READOUTS
As you exercise, the bike keeps track of the following data
- Time: The total time you have been working out.
- Display time as hour s: minutes.
- Speed: Your current speed, displayed in miles per hour (mph).
- Distance: The total accumulated distance, in miles during your workout.
- Calories: The total accumulated calories burned during your workout.
- RPM: The number of revolutions being completed on average within a minute.
- Pulse: Calculates your current heart rate during your workout.
MONITOR INSTRUCTIONS
AUTO ON/OFF
The monitor will automatically switch on when you start exercising, if you
stop exercising for over 4 minutes the monitor will power off and all digits
reset to zero.
TARGET PROGRAMS
With the IC350 Pro monitor you are able to set a target time, distance,
calories and pulse.
TARGET TIME
Press the ENTER button to reach the TIME function and press the UP or DOWN
buttons to enter the value you want.
Count up
Without setting the time value, the monitor will count up the time from
00:00~99:59. Count down
Setting the exercise time from 1:00~99:00 minutes, the monitor will count down
from your setting values. Once reach setting value, monitor will alarm.
TARGET DISTANCE
Press the ENTER button to reach the DIS function and press the UP or DOWN
buttons to enter the value you want.
Count up
Without setting the distance value, the monitor will count up the distance
from
0.1~999.9KM or Mile
Count down
Setting the exercise time from 1.0~999 Km or Mile, the monitor will count down
from your setting values. Once reach setting value, monitor will alarm.
TARGET CALORIE
Press the ENTER button to reach the CAL function and press the UP or DOWN
button to enter the value you want.
Count up
Without setting the distance value, the monitor will count up the distance
from 0.1~999.0. Count down:
Setting the exercise calorie from 1.0~999, the monitor will count down from
your setting values. Once reach setting value, monitor will alarm.
TARGET HEART RATE
Press the ENTER button to reach the T.H.R function and press the UP or DOWN
button to enter the value you want
Pulse Limit
Setting the value of pulse limit between 60 to 220, the monitor will measure
your heart-beats. Once you reach the setting value, the monitor will flash
until your heartbeats are under your setting value.
Place the palms of your hands on both of the pulse plates and the monitor will
show up your heart rate in beat per minute (BPM) on the LCD display.
RESETTING YOUR MONITOR
To reset the digits on your monitor press and hold the enter button, this will
return everything to zero.
Maintenance
Maintenance must be performed on a regular basis. Performing maintenance
actions can aid in providing safe and trouble-free operation of all JLL®
equipment.
JLL® are not responsible for performing regular inspection and maintenance
actions for your machine. JLL® representatives are available to answer any
questions that you may have on +44 (0)800 6123 988.
PREVENTIVE MAINTENANCE ACTIVITIES
Every JLL® bike that comes from the factory is already maintained, however,
you just need to follow simple steps to maintain it. Keeping the bike in a
clean state will help to prolong its life. Perform regular preventive
maintenance to ensure normal operation of the unit. Keep a log of all
maintenance actions to assist in staying current with all preventive
maintenance activities. JLL® is not responsible for performing regular
inspection or maintenance.
Read all instructions and warnings listed both in this chapter and in the
Safety chapter. Contact JLL® Customer Service on +44 (0)800 6123 988 for any
maintenance or service concerns.
Requirements.
- Water
- Dry cloth
- Vacuum
WARNING
- Only use water to clean and dust. Do not use any cleaning product because they may damage the bike.
- Be careful not to spill or get excessive moisture between the edge of the monitor, as this might create an electrical hazard or cause failure of the electronics.
- Direct spraying could cause damage to the electronics and may void the warranty.
Depending on where the bike is placed, you may experience dry air, causing a
common experience of static electricity. You can notice that by walking across
a carpet and then touching a metal object. On your bike you may experience a
shock due to the build-up of static electricity on your body and the discharge
path of the bike.
If you experience this type of situation, you may want to increase the
humidity to a comfortable level through the use of a humidifier.
Check your machine regularly for rust. If rust starts to appear on the screws
it means the item is not housed in the correct environment and will need to be
moved to a more suitable room. Any rust will indicate there may be moisture in
the air and as a result this could impact on the integrity and performance of
your machine.
WARNING
- Use only JLL® replacement parts.
- Keep water and liquids away from electrical parts.
- If you allow your machine to become rusty, this will affect your warranty.
EXERCISE BIKE CLEANING
Keep the pedals free of dust and debris for smooth running and preventing
injuries. Dust/debris may cause damage to the chain and other moving parts.
After every workout use a neat, dry cloth for cleaning the bike and the
handlebars to prevent the item of corrosion. Wipe away any sweat that may have
dripped onto the bike. Avoid scratching the display by using a soft cloth.
Vacuum or sweep the floor underneath and around the bike. A treadmill mat can
help to reduce dust.
For further cleaning, use a soft cloth or paper towel dampened with water. Do
not use abrasive or chemical cleaning agents.
EXERCISE BIKE BALANCE
Place the bike on a level floor to avoid it being off-balance. If that is not
possible, level the bike by adjusting the rubber feet located underneath the
stabilisers.
Check if the bike is balanced
- Stand in front of the unit with your hands on the handlebars.
- Gently rock the bike from side to side checking for any movement.
WARNING: EQUIPMENT HAZARD
To avoid serious injury or death
- Replace worn or damaged components immediately and do not use until repair is completed.
Additional Information
CONTACT INFORMATION
In case any issues arise, please do not hesitate to contact our Customer
Service team on +44 (0)800 6123 988 or email us at
CONTACT@JLLFITNESS.CO.UK
You can also visit our support centre at SUPPORT.JLLFITNESS.CO.UK for
maintenance and assembly articles & videos.
DISCLAIMER
- You should consult your physician, doctor or other health care professional before starting or taking part in any of our workout guides. It is your responsibility to evaluate your own health before taking part or performing any physical activity you may see associated with JLL Fitness Ltd.
- Always seek professional advice before changing your diet or starting any exercise program.
- JLL Fitness Ltd is not liable for any injuries or damages that may occur when assembling or using this exercise bike.
- By reading this you assume full responsibility for any injuries or changes to your physical well-being. You waive all rights and release JLL Fitness Ltd of blame from any injuries or damages to property that may occur whilst following our advice.
- This manual offers specific instructions on how to assemble and maintain your bike. Failure to follow these directions may result in your warranty being void.
- WWW.JLLFITNESS.COM
Follow us on Facebook and Twitter @JLLFitness
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>