TERMA T-ELHTR32 Alex One Brass Electric Towel Rail Instruction Manual
- June 4, 2024
- Terma
Table of Contents
T-ELHTR32 Alex One Brass Electric Towel Rail
Instruction Manual
Installation guide Alex ONE 1580x500mm – E8
Please read the instructions in full before starting to fit your radiator.
- Please check that all parts listed are present before starting installation.
- Valves are not provided, please make sure that you have them before you start. This product requires standard 1/2″ radiator valves.
- Before drilling holes for the brackets please check that there are no hidden wires or pipes.
- The plugs supplied are for hard walls masonry only. Please make sure you are using the correct plug for your wall.
- Terma radiators are designed for closed heating systems.
- The radiator should be fitted at least 100 mm from the floor to maximize heat efficiency.
- Noting the distances between bracket centers, mark out the position of the brackets on the wall.
- Drill holes to approximately 80 mm depth using a 10 mm drill bit and insert rawl plugs (1). Using connecting screw with a washer (2) attach mounting bracket-1 (3).
- Guide radiator brackets into mounting brackets – 1(3) and fix with connecting screws (4)
- Connect the water flow using appropriate 1/2″ BSP valves. Followvalves manufacture guidelines for correct installation.
- Fill the radiator and purge any trapped air via the bleed valve at the top of the radiator.
- Wipe your radiator down using a clean damp cloth. Never use scourers or abrasives.
For all installation and warranty inquiries please contact Crimson Bear
Customer Support on
01535 636256
Fixing kit content
rawl plug (1)|
---|---
wall fixing (2) screw +
washer|
mounting (3) bracket-1|
bracket to (4) collector fixing screw|
**air vent *|
Allen key**|
***** Refers to water and dual fuel version
Mounting bracket TERMA P4, P/S, 40 mm, 3x
***** Refers to water and dual fuel version only
gigieltom20170817
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>