APPOTRONICS M Series Slim and Bright Projector Installation Guide
- June 13, 2024
- APPOTRONICS
Table of Contents
Slim & Bright Thickness < 4 ”
M Series 4K 5200lm
Installation Projector
M Series Slim and Bright Projector
Vivid Color, High Resolution
- Precise Rec.709 color gamut. Perfect color reproduction.
- 1080P, 4K resolution.
Easy to Install
- Compact body with high output: thickness <4” and weighs only 20lbs.
- 360° installation, easy to install.
- Built-in wrapping & blending functions
- RGBCMYW 7-axiel color correction provides perfect uniformity.
- Multiple powered interchangeable lenses with wide range lens shift upto 100%.
Outstanding System Performance
- Built-in Android OS.
- 3D-Sync connection to support infrared 3D and DLP-link 3D.
- Rich I/O.
- Electric Shutter.
High Reliability
- Full-seal engine.
- Over 20000H engine life span.
4K Cinema Level Picture
Interchangeable Lens & Built-in Blending/Wrapping Functions
APPOTRONICS PROJECTOR SPECIFICATION
- Based on ISO21118 standard.
- Full white/full black.
- Not including protruding parts.
- Including standard lens. Average value.
- Operation temperature will be set to 32°F~95°F when working under High Altitude Mode. Output of projector will be reduced to 50% if ambient temperature exceeds 95°F.
- The output of the projector will have decreased by approximately 50% around this time. Data from accelerated lab simulations. Actualtime may vary according to the operating modes, environment and other user behaviors.
APPOTRONICS USA, INC.
For more information about Appotronics projector, please visit:
www.appotronicsusa.com
1. All brightness and contrast figures mentioned in this document are in
accordance with ISO 21118 standard. Figures listed represent average values in
production units. 2. The life span of the light source can be influenced by
many factors including display modes, usage and others. 3. Measurements and
measuring conditions of values mentioned in this document are all in
accordance with ISO 21118 4. ©Appotronics Co., Ltd. 2020. DLP, DLP°, DLP logo
and DLP Medallion logo are trademarks or registered trademarks of Texas
Instruments.
https://www.instagram.com/appotronics_usa/