CHAUVET REM-RB100CM IP Rig Bars Light User Guide
- June 13, 2024
- Chauvet
Table of Contents
CHAUVET REM-RB100CM IP Rig Bars Light
Product Information
| Model ID | REMRB100CMIP |
|---|---|
| Edition Notes | The REM-RB100CM IP User Manual includes a description, safety |
precautions, installation, programming, operation and maintenance
instructions for the REM-RB100CM IP as of the release date of this
edition.
Trademarks| Chauvet, Chauvet Professional, the Chauvet logo, and REM are
registered trademarks or trademarks of Chauvet & Sons, LLC
(d/b/a Chauvet and Chauvet Lighting) in the United States and other
countries. Other company and product names and logos referred to
herein may be trademarks of their respective companies.
Copyright Notice| Chauvet authorizes its customers to download and print this
manual for professional information purposes only. Chauvet
expressly prohibits the usage, copy, storage, distribution,
modification, or printing of this manual or its content for any
other purpose without written consent from Chauvet.
Document Printing| For best results, print this document in color, on letter
size
paper (8.5 x 11 in), double-sided. If using A4 paper (210 x 297
mm), configure the printer to scale the content accordingly.
Intended Audience| Any person installing, operating, and/or maintaining this
product should completely read through the guide that shipped with
the product, as well as this manual, before installing, operating,
or maintaining this product.
Disclaimer|
Document Revision| This is revision 1 of the REM-RB100CM IP User Manual. Go to
www.chauvetprofessional.com for the latest
version.
Product Usage Instructions
Before You Begin
Before using the REM-RB100CM IP, make sure to:
- Read through the user manual and familiarize yourself with the product.
- Ensure you have all the necessary tools and equipment for installation and operation.
- Follow all safety precautions mentioned in the manual.
Introduction
The REM-RB100CM IP is a product with the following features:
- Description: [Description of the product]
- Features: [List of features]
- Product Overview: [Overview of the product]
- Product Dimensions: [Dimensions of the product]
Setup
Mounting
To mount the REM-RB100CM IP, follow these steps:
- [Mounting step 1]
- [Mounting step 2]
- [Mounting step 3]
Orientation
When setting up the REM-RB100CM IP, ensure it is positioned correctly
according to the desired orientation. Refer to the manual for specific
orientation instructions.
Rigging
If rigging is required for installation, follow these steps:
- [Rigging step 1]
- [Rigging step 2]
- [Rigging step 3]
Overhead Mounting
If you are mounting the REM-RB100CM IP overhead, please follow the overhead
mounting instructions provided in the manual.
Clamp Attachment Bracket
If using a clamp attachment bracket, refer to the manual for instructions on
how to properly attach it to the REM-RB100CM IP.
Removing the Hoist Rings
If necessary, follow the manual’s instructions on removing the hoist rings
from the REM-RB100CM IP.
Stacking
If you need to stack multiple REM-RB100CM IP units, please refer to the
stacking instructions provided in the manual.
Stacking with Ground Support 2 Kit
If using the Ground Support 2 Kit for stacking, follow the instructions
provided in the manual for proper setup and usage.
Edition Notes
The REM-RB100CM IP User Manual includes a description, safety precautions,
installation, programming, operation and maintenance instructions for the REM-
RB100CM IP as of the release date of this edition.
Trademarks
Chauvet, Chauvet Professional, the Chauvet logo, and REM are registered
trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet
Lighting) in the United States and other countries. Other company and product
names and logos referred to herein may be trademarks of their respective
companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited
to, all designs, text, and images are owned by Chauvet.
© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for
professional information purposes only. Chauvet expressly prohibits the usage,
copy, storage, distribution, modification, or printing of this manual or its
content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11
in), double-sided. If using A4 paper (210 x 297 mm), configure the printer to
scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should
completely read through the guide that shipped with the product, as well as
this manual, before installing, operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in
all respects. However, Chauvet assumes no responsibility and specifically
disclaims any and all liability to any party for any loss, damage or
disruption caused by any errors or omissions in this document, whether such
errors or omissions result from negligence, accident or any other cause.
Chauvet reserves the right to revise the content of this document without any
obligation to notify any person or company of such revision, however, Chauvet
has no obligation to make, and does not commit to make, any such revisions.
Download the latest version from
www.chauvetprofessional.com.
Document Revision
This is revision 1 of the REM-RB100CM IP User Manual. Go to
www.chauvetprofessional.com for the latest version.
Before You Begin
What Is Included
- REM-RB100CMIP
- 2x Clamp attachment bracket (DRB-CTC)
- 2x Clamp bolt for TRUSST CTC-50HC
- Quick Reference Guide
Claims
Carefully unpack the product immediately and check the container to make sure
all the parts are in the package and are in good condition.
If the box or the contents (the product and included accessories) appear
damaged from shipping, or show signs of mishandling, notify the carrier
immediately, not Chauvet. Failure to report damage to the carrier immediately
may invalidate a claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to
shipping, or concealed damage, file a claim with Chauvet within 7 days of
delivery.
Text Conventions
| Convention | Meaning |
|---|---|
| 1–512 | A range of values |
| 50/60 | A set of values of which only one can be chosen |
| Settings | A menu option not to be modified |
| < ENTER> | A key to be pressed on the product’s control panel |
Symbols
Symbol: Meaning
- Critical installation, configuration, or operation information. Not following these instructions may make the product not work, cause damage to the product, or cause harm to the operator.
- Important installation or configuration information. The product may not function correctly if this information is not used.
- Useful information.
Safety Notes
Read all the following safety notes before working with this product. These
notes contain important information about the installation, usage, and
maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in
this User Manual will only apply to properly trained, certified technicians.
Do not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of
this product.
ALWAYS:
- Take environmental aspects into account when using outdoors. The performance or structural integrity of LED video panels and rigging hardware may be affected by sunlight, rain, or especially, wind.
- Consult with a professional structural engineer for any Temporary Demountable Structure (temporary indoor or outdoor stage) designs to ensure this product can be used safely in each application.
DO NOT:
- Submerge this product (adhere to standards for the published IP rating). Regular outdoor operation is fine.
- Permanently install outdoors in locations with extreme environmental conditions. This includes, but is not limited to:
- Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
- Locations where normal temperatures exceed the temperature ranges in this manual.
- Locations that are prone to flooding or being buried in snow.
- Other areas where the product will be subject to extreme radiation or caustic substances.
- In the event of a serious operating problem, stop using immediately.
- If a Chauvet product requires service, contact Chauvet Technical Support.
Introduction
Description
The REM-RB100CM IP is a dual-function rig bar which can be used to hang video
panels overhead and for ground-stacking purposes with the Ground Support 2
Kit. With an IP65 rating, use in combination with REM IP video panels for
versatile and easy video wall setups almost anywhere.
Features
- REM Rig Bar, used for both overhead hanging and ground stacking
- Works with Chauvet REM video panels
- Equipped hoist ring supports standard rigging hardware for overhead hanging (1/2” and 5/8” shackles)
- Included Clamp attachment bracket (DRB-CTC) allows for direct connection using M12 bolts in clamps using TRUSST CTC-50HC
Product Overview
Product Dimensions
Setup
Mounting
Before mounting the product, read and follow the safety recommendations
indicated in the Safety Notes.
Orientation
Always mount this product in a safe position, making sure there is adequate
room for ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this
product.
- Before deciding on a location for the product, make sure there is easy access for maintenance.
- Make sure that the structure and attachment points can support the weight before hanging the product and attaching REM video panels to it. See the Technical Specifications for weight information, and download the User Manuals for REM video panels from www.chauvetprofessional.com.
- When rigging the product onto a truss, use mounting hardware of appropriate weight capacity.
Overhead Mounting
- Insert alignment conicals into the alignment holes and allow magnets to connect.
- Insert the rig bar latch locking bars into the receivers on the REM video panel.
- Twist the spring knob on the rig bar latch by 90°, until it locks into place.
- Twist the tightening knob clockwise until REM video panel is secure to the rig bar.
- To detach the rig bar from the REM video panel, reverse the previous steps.
Warning! The magnetic attachments are not load-bearing, and are intended for alignment assistance only. Do not release the video panel until the hanging hardware has been fully secured.
Clamp Attachment Bracket
To mount the REM-RB100CM IP overhead with standard Trusst clamps, follow the
instructions under Removing the Hoist Rings and replace the hoist rings with
the included clamp attachment brackets. For the Chauvet Professional line of
mounting clamps, go to http://trusst.com/products/.
Removing the Hoist Rings
To remove a hoist ring from the REM-RB100CM IP:
-
Remove the safety clip from the hoist pin.
-
Slide the hoist pin out of the hoist assembly.
Take special care of the washers when removing and installing the hoist pin and hoist -
To re-install the hoist ring or to install the included Clamp Attachment Bracket, reverse the previous steps.
Warning! Replacing the hoist ring with other hardware may change the load capacity of the product!
Stacking
Stack video panels upon the REM-RB100CM IP when using with the Ground Support
2 Kit from Chauvet.
- Insert alignment conicals into the alignment holes and allow magnets to connect.
- Close the levers of the latches on the REM video panel.
- To detach the rig bar from the REM video panel, reverse the previous steps.
Warning! The magnetic attachments are not load-bearing, and are intended for alignment assistance only. Do not release the video panel until the hanging hardware has been fully secured.
Stacking with Ground Support 2 Kit
For more information on how to use the REM-RB100CM IP with the Ground Support
2 Kit, download the User Manual for the Ground Support 2 Kit from
www.chauvetprofessional.com.
Adjusting the Height
When connected video panels aren’t aligning 100% correctly, adjusting the
height of the REM-RB100CM IP hoist ring even the smallest amount can correct
the issue.
Turn the height adjustment bolt with an adjustable wrench to adjust the height
of the hoist ring.
Inspecting for Faults
Each part of the REM-RB100CM IP should be regularly inspected for faults such
as warping or cracking. A qualified and competent person should inspect the
product for faults before each use to ensure it performs as intended.
A flat edge such as a precision level can be used to check flat surfaces for
warping.
If a fault occurs in any part, that part should be taken out of use until
replaced or repaired by a qualified and competent individual.
Technical Specifications
Contact Us
General Information Technical Support
Chauvet World Headquarters
Address: 3360 Davie Rd.
Voice: 844-393-7575
Davie, FL 33314
Fax: 954-756-8015
Voice: 954-577-4455
Email:
chauvetcs@chauvetlighting.com
Fax: 954-929-5560
Toll Free: 800-762-1084
Website: www.chauvetprofessional.com
Chauvet U.K.
Address: Pod 1 EVO Park
Email: UKtech@chauvetlighting.eu
Little Oak Drive, Sherwood Park
Nottinghamshire, NG15 0EB
Website: www.chauvetprofessional.eu
UK
Voice: +44 (0) 1773 511115
Fax: +44 (0) 1773 511110
Chauvet Benelux
Address: Stokstraat 18
Email: BNLtech@chauvetlighting.eu
9770 Kruishoutem
Belgium Website:
www.chauvetprofessional.eu
Voice: +32 9 388 93 97
Chauvet France
Address: 3, Rue Ampère
91380 Chilly-Mazarin
Email: FRtech@chauvetlighting.fr
France Website:
www.chauvetprofessional.eu
Voice: +33 1 78 85 33 59
Chauvet Germany
Address: Bruno-Bürgel-Str. 11
28759 Bremen
Email: DEtech@chauvetlighting.de
Germany Website:
www.chauvetprofessional.eu
Voice: +49 421 62 60 20
Chauvet Mexico
Address: Av. de las Partidas 34 – 3B (Entrance by Calle 2)
Email: servicio@chauvet.com.mx
Zona Industrial Lerma Website:
www.chauvetprofessional.mx
Lerma, Edo. de México, CP 52000
Voice: +52 728-690-2010
Warranty & Returns
For warranty terms and conditions and return information, please visit our
website.
For customers in the United States and Mexico: www.chauvetlighting.com
/warranty-registration.
For customers in the United Kingdom, Republic of Ireland, Belgium, the
Netherlands, Luxembourg,
France, and Germany: www.chauvetlighting.eu/warranty-
registration
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>