FantiniCosmi CH120RF O60RF Wireless Radiator Actuator Instructions
- June 13, 2024
- FantiniCosmi
Table of Contents
FantiniCosmi CH120RF O60RF Wireless Radiator Actuator
The O60RF wireless actuator replaces the sensor head or the control knob already existing on the radiator valve with thermostatic option. The actuator opens or closes the hot water flow in order to provide the best climatic comfort based on the temperature set by CH120RF/CH180RF room thermostats.
SCOPE OF DELIVERY
- 1 O60RF actuator,
- 1 coupling ring,
- 1 adapters set with four parts,
- 1 screw and nut,
- 1 removing tool and this installation manual.
INSTALLATION
BATTERIES INSERTING
- In order to insert the batteries, remove before the battery flap as indicated in the picture 1.
- Insert two AA 1,5V alkaline batteries matching the polarity showed in the battery compartment. Only at the first batteries insertion the actuator goes into mounting position and it stays in this position until the commissioning procedure is finished.
MOUNTING
The wireless actuator can be quickly and easily mounted on all common valves with 30×1,5 thread, as indicated below:
- Screw the white coupling ring (B) on the valve (A)
WARNING: never turn the actuator on the coupling ring because this operation will damage the device.
VALVE ADAPTERS
One of the enclosed adapters is required for installation on Danfoss valves. The arrangement of the suitable adapter ring for the appropriate valve can be found in the following description. Please completely remove the connection rods highlighted in black prior to assembly the adapter.
- For the RAV model valve, use E and G parts with screw and nut (H);
- For the RA model valve, use D part with screw and nut (H);
- For the RAVL model use only F part.
O60RF is compatible with the following thermostatic radiator valves brands:
BRAND/ CODE
- Luxor: unnecessary
- Honeywell: unnecessary
- Oventrop: unnecessary
- Caleffi: (338, 339, 401, 402, 421, 425, 426, 4001, 4003, 4004, 3380, 455):309703
- Caleffi: 309706
- Danfoss (RA): included
- Danfoss (RAV): included
- Danfoss (RAVL): included
- Watts: unnecessary
- FAR: 309706
- R.B.M.: 309706
- Giacomini: 309704
- Itap: unnecessary
- Herz: 309705
- Siemens: 309706
Cod. 309703: adapter for Caleffi valves
Cod. 309704: adapter for Giacomini valves
Cod. 309705: adapter for Herz valves
Cod. 309706: adapter for M30x1,5 valve
COMMISSIONING AND NETWORK INCLUSION
The actuator will works only after the network inclusion step. For this procedure it’s necessary to use a special “configuration tool” that provides all instructions by display messages. When required, will be necessary to touch the “X” area of the actuator with the tool (see picture 4). For more details, please refer to the wireless multi-zone system manual.
TECHNICAL DATA
- Power supply: 2 batteries 1,5V type AA;
- Transceiver frequency: 868MHz
- Degree of protection: IP30;
- Operating temperature: 0 ÷ 50°C;
- Storage temperature: -20 ÷ +70°C;
- Shape type: white ABS plastic;
- Dimensions: 48x63x74mm;
- Valve connection: M30x1,5.
- Complies with Directive 2004/108 / EC;
- Responding to Directive 2014/53 / EU (RED).
Contacts
Fantini Cosmi
- Fantini Cosmi S.p.a. Via dell’Osio, 6 20049 Caleppio di Settala MI – ITALY
- Tel: 02 956821
- Fax: 02 95307006
- info@fantinicosmi.it
- http://www.fantinicosmi.it
SUPPORTO TECNICO: supportotecnico@fantinicosmi.it
EXPORT DEPARTMENT
- Tel: ++39 02 95682222
- export@fantinicosmi.it