FantiniCosmi CH180-230V Chronothermostat Touchscreen Backlit User Guide
- June 13, 2024
- FantiniCosmi
Table of Contents
FantiniCosmi CH180-230V Chronothermostat Touchscreen Backlit
Product Information
The CH180-230V is a weekly programmable thermostat that can also be controlled
remotely via the Intelliclima+ App. It is equipped with a temperature sensor
and is designed to control heating/cooling systems.
Product Usage Instructions Installation
The installation of the CH180-230V must be carried out by qualified personnel
in compliance with the requirements for installing electrical equipment.
Ensure that the power to the system is disconnected before performing any
installation operations. The programmable thermostat can be installed on the
wall or on a flush mounting box, either in 3 units or round. Install it at a
height of approximately 1.5m from the
floor, in a position that can accurately detect room temperature.
Electrical Connection: Connect the CH180-230V thermostat to a 180-230V power source. – Follow the electrical connection instructions provided in the complete English manual available at pdf.
Description of Display Keys: – Refer to the complete English manual
available at it for a detailed description of the display keys and their
functions.
Language Selection: Press the appropriate key on the display to access
the language selection menu. – Follow the instructions provided in the
complete English manual to select your preferred language.
Date and Time Setting: Access the date and time setting menu on the
display. Follow the instructions provided in the complete English manual to
set the date and time accurately.
Technical
Features: – Refer to the complete English manual available for detailed
technical specifications of the
CH180-230V thermostat.
Disposal of Products: – Follow the
disposal guidelines provided in the complete English manual for proper
disposal of the CH180-230V thermostat. Please note that for more detailed
instructions and information, it is recommended to refer to the complete
English manual available.
PRELIMINARY INFORMATION
The complete English manual is available at the following.
INTRODUCTION TO THE SYSTEM
CH180-230V is a weekly programmable thermostat, which is also remote- controlled via the Intelliclima+ App. Fitted with a temperature sensor, it controls heating/cooling systems.
INSTALLATION
ATTENTION!
Installation must be done by qualified personnel in compliance with the requirements concerning installation of electrical equipment. Installation operations must be done with the system’s power disconnected. The CH180-230V programmable thermostat must be installed on the wall or on a flush mounting box, in 3 units or round, at a height of about 1.5m from the floor, in a position to properly detect room temperature
ELECTRICAL CONNECTION
DESCRIPTION OF DISPLAY KEYS
Pressing any key for the first time lights up the display.
- Day of the week
- Activation status: air conditioning or heating
- Room temperature (Celsius/ Fahrenheit)
- Multi-function touch icons
- Operating mode
- The bar graph displays messages and daily programming
Please note : the function of the Multi-function keys varies depending on the situation and is described by the symbol that appears on the display next to the key.
CHOIX LANGUE
CONFIGURATION DATE ET
HEURE
TECHNICAL FEATURES
| Temperature adjustment scale | 2 ÷ 40 °C, increase 0,1°C |
|---|---|
| Measurement scale/ room T display | – 50 ÷ + 50 °C |
| Power supply | 230V 50 Hz |
Output type
| 1 relay with dry changeover contact (COM/NA/NC)
3 screw clamps (closed + open)
Contact range| 5(3)A 250 Vca
Type of action| 1 B.U. (connection micro-switch)
Software| class A
Minimum adjustment differential| STD-0,3 ÷ 5 K
Thermal gradient of reference| 4 K/h
Maximum room temperature| 45°C
Storage temperature| -10°C ÷ +60°C
Electric insulation| Double insulation
Degree of protection| IP40
Pollution degree| 2
Pulse voltage| 4000V
Assembly| on wall or on flush mounting box
Dimensions| 127 x 82 x 24 mm
DISPOSAL OF PRODUCTS
The crossed-out wheeled dust bin symbol indicates that products must be
collected and disposed of separately from household waste. Integrated
batteries and accumulators can be disposed of with the product. They will be
separated at the recycling centers. The black bar indicates that the product
was placed on the market after August 13, 2005. By participating in a separate
collection of products and batteries, you will help to ensure the proper
disposal of products and batteries and thus help to prevent potential negative
consequences for the environment and human health. For more detailed
information about the collection and recycling programs available in your
country, please contact your local city office or the shop where you purchased
the product
Supporto tecnico:
supportotecnico@fantinicosmi.it
EXPORT DEPARTMENT Tel. ++39 02 95682222 I
export@fantinicosmi.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>