AIYAPLAY GL 331-030V00 Children’s Slide Instruction Manual

: June 13, 2024
: AIYAPLAY

Table of Contents

GL 331-030V00 Children’s Slide
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GL 331-030V00 Children’s Slide

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

Dear customer,
Thank you for purchasing this product. So that your appliance serves you well
please read all the instructions in this user’s manual. I you have any questions,
please contact our customer care center, Our contact details are below:

Country
Us

Phone
001-877-644-9366

i Email
customerservice@aosom.com

Note: All parts installed in the current step are green.
Tighten all screws after all assembly is complete.
ASSEMBLY INSTRUCTIONS
To be retained for future reference.
WARNING: Only for domestic outdoor use.
Dear Customer,
To guarantee safety, please give special attention to the assembly,safety, and care instructions
detailed in this document.
ASSEMBLY ADVICE
Please follow the assembly instructions exactly as given.
1)This product must be assembled by an adult.
2)Keep a copy of your assembly instructions for future reference.This can be particularly handy for
identification
of parts if any after sales service is required.
3)Before commencing, check that none of the parts are missing.If you find that you are missing a
part please contact our after sales service department.
4)Dispose of packaging thoughtfully.
5)Do not allow children to play with packaging.

SAFETY ADVICE

This product must not be used by children under the age of 36 months. It is suitable only for
children between the ages of 3 and 12 years with a maximum weight of 50kg. It must be used under
adult supervision.
As this product contains small parts that could be swallowed, please keep parts away from
children under 36 months.
This product is only for private use at home and must never be used in parks and public gardens,
in schools, camp sites, hotels, public leisure areas, etc.
This product should be set up on a flat surface 2 meters away from all other things, structures or
obstacles(walls, fences, trees, washing lines or electric cables etc.)that could cause injury during
use.
This product must not be set up over hard surfaces such as concrete, asphalt or other hard
surfaces. We recommend installation over grass or other such soft surfaces.
This product must be embedded firmly into the ground. Please follow the instructions carefully for
doing so. Only use this product when the concrete is dry.
Anchors should be placed level with or below ground level in order to reduce tripping hazards
The anchorage must be checked regularly, in addition to the hooks and fixtures.
Dispose of packaging thoughtfully.
Do not allow children to play with packaging.
During the assemble ,keep children away the toy to avoid child swallow the small accessories.

MAINTENANCE

All metal parts are galvanized steel and powder coated for rust protection; however, in certain
areas close to the sea we advise that additional rust prevention treatment may be necessary.
The surfaces of all the parts should be checked at least once a month, especially for the fixtures
such as hooks on the overhead beam. If the fixtures and hooks show wear over 10% of their original
thickness, then they should be replaced with the same fixtures as those originally provided.
To check all nuts and bolts for tightness and tighten when required.
To check all coverings for bolts and sharp edges and replace when required.
Toys may collapse or be dangerous if they don’t check regularly.
The ground on which the product is placed should be controlled regularly. All elements such as
stones or other objects that could cause injury in the case of a fall should be removed. It is advised
to remove the apparatus during the winter period, when not in use, to avoid any deterioration due to
bad weather conditions.
All used apparatuses and/or parts must be replaced by a part delivered by our after sales service,
or by an approved retailer.
If any modifications made by consumer to the original activity toy shall be carried out according to
the instructions of the manufacturer.
Sand rusted areas and tubular members and repaint using a non-lead based paint when
required.

PRACTICAL ADVICE

Safety checks should be carried out regularly on this product. These checks should include, if
necessary, removing any sharp edges, replacing missing screw covers, and tightening the nuts and
bolts. These checks should be done to avoid any danger or upturning through normal wear and tear.