TRISTAR BW-4780LE Electric Blanket Instruction Manual
- August 31, 2024
- Tristar
Table of Contents
- Intended Purpose
- Information about this instruction manual
- Copyright
- Safety advice
- Using the heating blanket
- Technical data
- Cleaning
- Maintenance & Storage
- Troubleshooting
- Disposal of the device (environment)
- Tristar warranty
- Customer Support
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TRISTAR BW-4780LE Electric Blanket
The features described in this manual are published with reservation to modifications
Intended Purpose
The Heating Blanket BW-4780LE is fitted with a special safety appliance which
can automatically regulate the temperature by turning the power on and off at
regular intervals.
The maximum temperature of the heating blanket is limited to ensure safe use.
Information about this instruction manual
This instruction manual is part of the Heating Blanket BW-4780LE (hereinafter
referred to as “the device”).
It contains important information about setting up the device, safety aspects
and correct use.
The instruction manual must always be kept close by the device. It must be
read and followed by anyone responsible for operating the device, resolving
faults and/or cleaning it.
Keep this instruction manual safely and if you sell the device please give it
to the next owner.
Copyright
This documentation is protected by copyright.
All rights, including those of total or partial photomechanical reproduction,
duplication and distribution by means of particular processes (such as data
processing, data carriers and data networks), and substantive and technical
changes are reserved.
Safety advice
WARNING
- The device is only intended for the purpose described in this user guide. The manufacturer cannot be held liable for personal injuries or damages occurring as a result of inappropriate or careless use.
- Always read the safety instructions carefully and keep this user guide for future reference.
- Follow the basic safety precautions for all electronic equipment when using this device.
- This device is not a toy. Don’t let children play with it.
- The device is only for private indoor use and is not intended for commercial purposes.
- This appliance is not intended for medical use in hospitals.
- Do not leave the device unattended when plugged in. Unplug the device immediately from the main power after use.
- Make sure that the device is not too close to heat sources such as ovens, radiators or direct sunlight.
WARNING
- Ensure that the supply voltage stated on the rating plate is compatible with your mains supply.
- Do not use the blanket if there is visible damage to the blanket, controls or leads.
- Do not use the device if it is not working properly, dropped or damaged.
- Repairs to electrical appliances must only be carried out by qualified persons. Incorrect repairs can lead to considerable danger for the user. In the event of repairs, please contact our customer service or an authorized dealer.
- Don’t disassemble this device. It doesn’t contain parts that can be repaired by the user.
- Do not insert objects into any opening.
- Do not place the unit in a damp room and at a distance of less than 1.5 m away from a water source. Do not use the device too long. Extensive use could lead to a shorter lifetime.
- Never carry, pull or turn the heating blanket by the mains lead and do not let the lead get tangled.
- Never use the appliance during a thunderstorm.
- Keep the mains lead away from hot surfaces.
- Never touch a device that has fallen into water. Unplug the device from the mains outlet immediately.
- Do not use the heating blanket when wet.
HEATING BLANKET PRECAUTIONS
- Only use the control unit that is supplied with the heating blanket and marked on the label.
- This device is not intended to be used by person (including children) with mental, sensory or physical handicaps or person with lack of experience and/or knowledge to use this device. For their safety is it is necessary to keep close supervision and give them clear instructions when they are using the device.
- Do not use this blanket on helpless persons, small children or persons insensitive to heat.
- It is not allowed to use the heating blanket If you are fitted with a cardiac pacemaker, implant or other aid.
- Individuals with pacemaker should consult their doctor before use.
- Carefully check the heating blanket before each use.
- Do not fold or crease the heat blanket during use before connecting the device to your power supply.
- Neither pierce the blanket with, nor attach safety pins or other spiky or sharp objects to the blanket.
- Do not tuck in.
- Never apply the blanket unsupervised.
- Prolonged use of the heating blanket at a high setting could lead to skin burns.
- Do not cover the blanket with any other cushions. The control switch should not be covered or placed on or below the blanket while the unit is in operation.
- Should you have any concerns about health issues, consult your doctor before using the heat blanket.
- Do not use the appliance to heat animals.
- Do not use with other heating appliances.
WARNING- Risk of fire
- Do not activate the blanket when it is still packed in the box. Extensive heat can occur and cause fire.
- Do not place the heating blanket under inflammable objects, especially not under paper or curtains.
Using the heating blanket
The heating blanket is equipped with a digital timer with 9 heat settings.
-
Press the on button (1) for 2 seconds to activate the controller;
-
Press the temperature button (2) to select the heat setting from 1 to 9.
-
Press the timer button (3) to select the auto shut-off timer from 1 hour to 9 hours.
-
Press the preheat button (4) for 2 seconds to activate the preheat function. The temperature will go to maximum heat within 10 minutes, then it will automatically bring down the heat settings to 5 for safety purpose.
-
The controller features a memory function. As long as it remains plugged in, when users turn the controller back on, it will return to the same heat settings and auto-timer settings as before they turned it off.
-
Error code E1:
Cause: The controller detects the wrong unit
Solution: Make sure the controller connects the correct paired unit. -
Error code E3:
Cause: controller could not detect the unit because connector is not connected tightly enough, or heating wire is broken, or controller temperature is too high. Solution: Reconnect the coupler. If the controller still doesn’t work after reconnecting, then return the product to the seller.
- Place the blanket on that part of your body you wish to heat and select the desired temperature.
- After use, disconnect the blanket from the mains socket.
WARNING
- The mains socket must be close and easy accessible.
Technical data
Dimensions (W/H/D) | 160 cm x 130 cm |
---|---|
Weight | 1,3 kg |
Rated voltage | Input: 220-240V 50-60Hz |
Power consumption | 80 W |
Material | 100% polyester |
Cleaning
- Machine washing of the blanket is possible; however, hand wiping will prolong the life of the blanket.
- To machine wash, remove the control unit and place the blanket in a net bag and seal it.
- Use a small amount of detergent and set the washing machine to a “Delicate Wash” with a maximum temperature of 30°C. When washed, remove the blanket from the net bag and drape it over a clothes line to dry.
- Do not use clothes pegs to secure it.
- Allow the blanket to dry naturally
WARNING
- Never use abrasive cleaners, brushes, gasoline, kerosene, glass polish or paint thinner to clean.
- Do not wring out the blanket
- Do not dry using a tumble dryer
- Do not iron the blanket
- Do not dry clean.
- Don’t connect the blanket to power supply to dry it.
- Don’t dry it in the sun or iron it, which will cause safety problems because of the aging of the insulating layer.
- Do not use an appliance such as a hair dryer to dry it
Maintenance & Storage
Store the heating blanket only if it is dry.
The dry electric heating blanket should be folded without any crease. Don’t
place it under quilt or other things in order to avoid any pressure.
WARNING
- Don’t use any mothproofing agent like naphthalene, which will damage the insulation material.
- Do not try to repair a fuse link or thermal link. The appliance must be returned to the manufacturer or his agent if the link has ruptured.
- Examine the appliance frequently for signs of wear or damage. If there are such signs or if the appliance has been misused, return it to the supplier prior to any further use.
- Avoid creasing the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Troubleshooting
Error code | Cause | Situation | Solution |
---|---|---|---|
E1 | The connector isn’t connected tight enough. | The users connect the | |
controller to other heating products’ coupler. | Make sure the controller |
connects the correct paired unit.
E3| No calibration or abnormal calibration of the controller| A. The
coupler doesn’t connect tightly enough or doesn’t connect at all;
B. The heating wire is broken or too hot| A. Reconnect the coupler;
B.
If the controller still doesn’t work after reconnecting, then return the
product to the seller
Disposal of the device (environment)
At the end of the device lifecycle, you should not throw this device into the
normal household garbage but bring the device to a collection point for the
recycling of electrical and electronic equipments. The symbol on the device,
user guide and/or box indicate this.
Some of the device materials can be re-used if you bring them to a recycling
point. By re-using some parts or raw materials from used devices you make an
important contribution to the protection of the environment. Please contact
your local authorities in case you need more information on the collection
points in your area.
Tristar warranty
Warranty period
The devices have a 24-month warranty period. The warranty period starts on the day the new unit is purchased. Consumables or defects causing a negligible effect on operation or value of the equipment are not covered. The warranty has to be proven by presentation of the original or copy of the purchase receipt, on which the date of purchase and the unit-model are indicated.
Warranty exclusions
Damage or defects caused by incorrect treatment or operation and damage
resulting from use of nonoriginal parts or accessories are not covered by the
warranty.
The warranty does not cover damage caused by outside factors, such as
lightning, water and fire, nor any damage caused during transportation.
No warranty can be claimed if the serial number on the units has been changed,
removed or rendered illegible. Any warranty claims will be invalid if the unit
has been repaired, altered or modified by the buyer.
This device is in compliance with the essential requirements and other relevant provisions of the directive 2004/108/EC. The Declaration of conformity can be found on: www.tristar.eu
Customer Support
www.tristar.eu
Tristar Europe B.V. | Swaardvenstraat 65 5048 AV Tilburg | The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>