D-Link DWA-142 RangeBooster N-USB 2.0 Adapter Quick Install Guide
- June 13, 2024
- D-Link
Table of Contents
D-Link DWA-142 RangeBooster N-USB 2.0 Adapter
System Requirements
- A computer or laptop with an available USB 2.0 port
- Windows® 2000 (SP4) or XP (SP2)
- 300MHz processor and at least 32MB of RAM
- Properly installed and working USB Controller
- A draft 802.11n or 802.11b/g access point (for Infrastructure mode), or another draft 802.11n wireless adapter (for Ad-Hoc networking mode).
Package Contents
If any of the above items are missing, please contact your reseller.
NOTE: This product is based on IEEE draft 802.11n specifications and is
not guaranteed to be forward-compatible with future versions of IEEE 802.11n
specifications. Compatibility with draft 802.11n devices from other
manufacturers is not guaranteed.
Adapter Installation
Warning: Do NOT install the DWA-142 USB Adapter into your computer before
installing the driver software from the D-Link CD.
Turn on the computer and Insert the D-Link DWA-142 Driver CD in the CD-ROM
drive. The step-by-step instructions that follow are shown in Windows XP. The
steps and screens are similar for the other Windows operating systems.
If the CD Autorun function does not automatically start on your computer, go
to Start > Run. In the run box type “D:\DWA142.exe” (where D: represents the
drive letter of your CD-ROM drive).
When the autorun screen appears, click Install Drivers.
The InstallShield Wizard window will appear.
By default, setup will install to the default location: C:\Program Files\D-Link\DWA-142, where C: represents the drive letter of your hard drive. To install to a different location click Browse and specify the location.
Select the Program Files folder location.
Insert the adapter into an available USB port on your computer. If the Found New Hardware Wizard appears, click Cancel.
The D-Link Configuration Wizard will now appear. If you are using Windows® XP (SP2), you will have the option to use either the D-Link utility or the built- in Windows® Wireless utility.
Enter the network name (SSID) manually. If you enter the SSID incorrectly, you will automatically be brought to the site survey page. Click Scan to display the site survey page.
Click on the network name (SSID) and click Next.
Click Finish to continue. If you are prompted to reboot your computer, select Yes, I want to restart my computer now.
Connect to a Wireless Network
Windows® XP Configuration Utility
Windows® XP users may use the built-in wireless utility. The following instructions are for Service Pack 2 users. If you are using Windows® 2000, you must use the D-Link utility. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility.
You may also right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks.
The Wireless Connection Manager will display any available wireless networks in your area. Click on a network and click the Connect button.
Refer to the Wireless Security section in the manual for information on connecting to a secure network.
Wireless Connection Manager
The DWA-142 uses the D-Link Wireless Connection Manager as the management software. The manager provides the user an easy interface to change any settings related to the wireless adapter. Clicking on the D-Link icon on your desktop will start the Configuration. To disable the Windows® XP wireless utility, and use the D-Link Wireless Connection Manager, follow the steps below: Right-click on the wireless computer icon in your system tray (lower- right corner next to the time). Select View Available Wireless Networks.
In the Choose a Wireless Network window click Change Advanced Settings on the left side below Related Tasks.
In the Wireless Network Connection Properties window, uncheck Use Windows® to configure my wireless network settings and then click OK.
Double-click the Wireless Connection Manager icon on your desktop to start the Configuration. This window will allow you to see available wireless networks in your area. Simply click the network (SSID) you want to connect to and click the Connect button.
If you are attempting to connect to a secure network, you must supply the encryption key that is on the router or access point you are trying to connect to. Please refer to the manual on the CD for more information on Wireless Security. If the network you are connecting to is using WEP, enter the WEP key for the network and click OK.
If the network you are connecting to is using WPA-PSK, enter the passphrase for the network and click OK.
Technical Support
D-Link’s website contains the latest user documentation and software updates
for D-Link products. U.S. and Canadian customers can contact D-Link Technical
Support through our website or by phone.
United States World Wide Web:http://support.dlink.com
Canada World Wide Web: http://support.dlink.ca
Trademarks
Copyright ©2006 D-Link Corporation/D-Link Systems, Inc. All rights
reserved. D-Link and the D-Link logo are registered trademarks of D-Link
Corporation or its subsidiaries in the United States and other countries.
Other trademarks are the property of their respective owners. Maximum wireless
signal rate derived from IEEE Standard 802.11g and draft 802.11n
specifications.
Actual data throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and
construction, and network overhead, lower actual data throughput rate.
Environmental factors will adversely affect the wireless signal range. Product
specifications, size, and shape are subject to change without notice, and
actual product appearance may differ from that depicted on the packaging.
Visit www.dlink.com for more details.
FAQ’s
What is the D-Link DWA-142 RangeBooster N-USB 2.0 Adapter?
The D-Link DWA-142 RangeBooster N-USB 2.0 Adapter is a wireless USB adapter that allows you to connect your computer to a Wi-Fi network, providing wireless internet access.
What is the maximum wireless speed supported by this adapter?
This adapter supports a maximum wireless speed of up to 300 Mbps, thanks to its RangeBooster N technology.
Is it compatible with Windows and macOS?
Yes, the D-Link DWA-142 RangeBooster N-USB 2.0 Adapter is compatible with both Windows and macOS operating systems.
Does it support WPA3 encryption for security?
No, this adapter supports WPA2 encryption for securing your wireless connections.
What type of USB interface does it use?
It uses a USB 2.0 interface, providing a high-speed connection to your computer.
Is there a setup CD included?
Yes, the adapter typically comes with a setup CD that contains drivers and setup instructions to help you get started.
Can I use it to connect to both 2.4GHz and 5GHz Wi-Fi networks?
No, the D-Link DWA-142 is a single-band adapter and can only connect to 2.4GHz Wi-Fi networks.
Does it support WPS (Wi-Fi Protected Setup) for easy configuration?
Yes, it supports WPS, which makes it easy to set up a secure wireless connection with compatible routers.
Is there a warranty for this adapter?
D-Link typically offers a limited warranty for their products. Please check the specific warranty details provided with the product.
What is the range of this adapter?
The range of the D-Link DWA-142 RangeBooster N-USB 2.0 Adapter can vary depending on environmental factors, but it is designed to provide extended wireless coverage.
Can I use this adapter for gaming and streaming?
Yes, you can use this adapter for online gaming and streaming, provided you have a stable Wi-Fi connection and sufficient bandwidth.
Does it support older Wi-Fi standards?
Yes, it is backward compatible with older Wi-Fi standards such as 802.11g and 802.11b, so you can connect to older networks as well.
References:D-Link DWA-142 RangeBooster N-USB 2.0 Adapter – Device.report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>