HENNY PENNY UHC 600 Chicken Pressure Fryer User Guide
- June 13, 2024
- HENNY PENNY
Table of Contents
UHC 600 Chicken Pressure Fryer
User Guide Operation Information
UHC 600 Chicken Pressure Fryer
Frontier UHC 600 Operation Quick Reference Card
Summary
Use the following instructions to operate and maintain the UHC 600 holding
cabinet. If you have questions or issues with your holding cabinet, contact
support by calling 1-937-456-8406.
Menu
Operation of Timers
a) Preheating Mode: In this mode the shelfs are currently preheating and are
not operational to hold product.
b) Product
Selection: Once Preheat has finished and the product is ready to use, it
displays grey. To select a product to start the timer, click once on the
product you want to start, it turns green and starts counting down. 
If you start a second timer for the same product, the
second timer displays in dark grey, until the first timer expires or is reset,
and then turns green.
Once the timer nears
the end, it beeps and displays yellow within the green bar, notifying the
operator to start cooking more product if needed. Once the product has
expired, the timer beeps multiple times and flashes Discard (in red) on the
screen.
c) Reduce timer: If you want
to reduce a timer, tap a product once to start the holding process, tap it
again before the timer starts. Each tap reduces the timer in 5-minute
increments. Once you get to the time you desire, stop tapping, the status
turns green or grey depending on if another timer is already started.
d) Reset timer: If you want to reset a timer to clear it, tap the timer once
and a reset option display. Select the check mark to clear the timer. 
Checking Shelf Temperatures
On the menu screen, press the thermometer button on the left. This brings up
the current temperatures of the shelfs. The left side displays the top heater
of that slot, and the right displays the bottom heater of that slot. To exit
the menu, press the back arrow button on the left.
Switching Menu Modes
To switch to a different menu option, click the selection menu lines on the
main menu bar to access the mode switch option. You can then swipe to change
each slot to a certain daypart or all slots at once by selecting the switching
mode on the left menu.
Clean Mode
To access the clean mode, press the clean mode button on the main menu. This gives you two options:
- Clean Screen
- Clean Mode
a) Clean Screen: Tapping this option locks the control display for 10 seconds so that it can be cleaned.
b) Daily Cleaning mode: Tapping this option starts a cool down of the heating slot. This is also the daily clean option for the holding cabinet. Once the slots are cool enough, safe to clean displays on the screen. Refer to the McDonald’s Daily cleaning guidelines to clean the unit.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>