HENNY PENNY FM08-783A Pressure Switch Instructions
- June 8, 2024
- HENNY PENNY
Table of Contents
HENNY PENNY FM08-783A Pressure Switch
Valid for pressure switch 202601
Read the installation instructions for the units and observe the safety information. The target group for this installation manual is trained qualified personnel entrusted with the technical functioning and operation of the unit.
Safety instructions
Organizational measures
Risk of property damage and personal injury from lack of organizational measures Use equipment and protective gear suitable for the activity
Danger of electric shock from live components.
- Prior to working on the electrical system, switch off the unit, disconnect the electrical system from the mains and prevent power from being switched on again. Check to ensure the system is dead.
- Use only insulated tools.
Preparatory work
INFORMATION
Close the customer-supplied water supply before starting work
Opening and closing the unit
Open and close the unit according to the service instructions.
FlexFusion
Remove the left side wall.
SpaceSaver, SpaceSaver Team
Remove the rear panel.
Remove pressure switch
- Pressure switch
- Retainer clip
- Reduce water pressure in the supply line.
- Disconnect both plugs from pressure switch.
- Pull out the retainer clip upwards
- Remove pressure switch.
Install pressure switch
Reassembly is carried out in reverse order
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>