PETZL P0015600B NANO TRAXION User Guide
- June 13, 2024
- PETZL
Table of Contents
P0015600B NANO TRAXION
User Guide
EN 567: 2013 compact progress capture pulley Poulie blogueur compacte sur roulements a billes EN 567: 2013
WARNING /ATTENTION
Activities invoking the use of this equipment are inherently dangerous. You
are responsible for your own actions and decisions.
Before using this equipment, you must:
- Read and understand all Instructions for Use.
- Get specific training in its proper use.
- Become acquainted with its capabilities and limitations.
- Understand and accept the risks involved.
**** FAILURE TO HEED ANY OF THESE WARNINGS MAY RESULT IN SEVERE INJURY OR DEATH.
Warring
symbols
PETZL FR-38920 Crolles Cidex 105A PETZL.COM ISO 9001 ©
Petzl
Sustaining our Community
- Field of application
-
- Inspection, points to verify
Traceability and markings
- Inspection, points to verify
- Compatibilty****
Standards|
---|---
Dynamic kernmantel ropes| 7 < 0 < 11 mm
Low stretch kernmantel ropes| 8,5 < 0 < 11 mm
Cords| 8 mm only / uniquement - Function principle and test
- Installing the pulley
- Performance
- Uses
- Additional information
These instructions explain how to correctly use your equipment. Only certain techniques and uses are described. The warning symbols inform you of some potential dangers related to the use of your equipment, but it is impossible to describe them all. Check Petzl.com for updates and additional information. You are responsible for heeding each warning and using your equipment correctly. Any misuse of this equipment will create additional dangers. Contact Petzl if you have any doubts or difficulty understanding these instructions.
Field of application
Personal protective equipment (PPE) used for fall protection. EN 567: 2013 compact progress-capture pulley with ball bearings. This product must not be pushed beyond its limits, nor be used for any purpose other than that for which it is designed.
Responsibility
WARNING
Activities involving the use of this equipment are inherently dangerous. You
are responsible for your own actions, decisions and safety.
Before using this equipment, you must:
- Read and understand all Instructions for Use.
- Get specific training in its proper use.
- Become acquainted with its capabilities and limitations.
- Understand and accept the risks involved.
Failure to heed any of these warnings may result in severe injury or death.
This product must only be used by competent and responsible persons, or
those placed under the direct and visual control of a competent and
responsible person. You are responsible for your actions, your decisions and
your safety and you assume the consequences of same. If you are not able, or
not in a position to assume this responsibility, or if you do not fully
understand the Instructions for Use, do not use this equipment.
Nomenclature
(1) Fbced side plate, (2) Cam, (3) Sheave, (4) Axle, (5) Moving side plate,
(6) Attachment hole, (7) Ball bearing, (8) Keeper cord hole. Principal
materials. aluminum, stainless steel, nylon.
Inspection, points to verify
Petzl recommends a detailed inspection by a competent person at least once
every 12 months.
WARNING : your intensity of use may cause you to inspect your PPE more
frequently. Follow the procedures described at Petzl.com.
Record the results on your PPE inspection form.
Before each use
Verify that the product has no cracks, deformation, marks, wear, corrosion…
Check the condition of the sheave and verify that it is working properly.
Check the axle and verify that the moving side plate is properly aligned.
Check the mobility of the cam and the effectiveness of its spring. WARNING: do
not use your NANO TRAXION if it has missing or worn-out teeth. Verify the
absence of foreign objects in the mechanism.
During use
It is important to regularly monitor the condition of the product and its
connections to the other equipment in the system.
Make sure that all items of equipment are correctly positioned with respect to
each other. Beware of foreign bodies (mud, snow, ice, debris…) which can
impede the operation of the cam. Beware of objects which can snag the cam and
cause it to open.
WARNING : locking effectiveness can vary depending on the state of the
rope (wear, moisture, ice…). Visual vercation: warning, when the cam appears
to be noticeably outside life body of the device, the progress capture
function is disabled.
Compatibility
Verify that this product is compatible with the other elements of the system
in your application (compatible = good functional interaction).
Ropes
The NANO TRAXION works on 7-11 mm diameter EN 892 dynamic kemmantle ropes.
The NANO TRAXION works on 8.5-11 mm diameter EN 1891 low stretch kemmantle
ropes Cords The NANO TRAXION works on EN 564 cords of diameter 8 mm. See the
cord’s Instructions for Use.
Connector
Use a locking connector, preferably oval or pear-shaped. Verify that your
connector is compatible with the NANO TRAXION. Make sure that the connector is
always loaded on the major axis.
Function principle and test
The NANO TRAXION allows the rope to slide in one direction, and blocks in the other direction. The cam’s teeth initiate the damping action, then the rope is blocked by being pinched against the sheave.
Installing the NANO TRAXION
Rotate the moving side plate into the open position. Install the rope without manipulating the cam: press the rope to move the cam in the opening direction. Close the moving side plate and install a locking connector in the attachment hole. Verify that the rope is locked in the desired direction. WARNING: the NANO TRAXION must be attached so that it can move freely.
Removing the rope
Remove the connector, open the moving side plate. Slide the device upward
while separating it from the rope. The rope will naturally free itself from
the cam.
Cam positions
To disable the progress capture function raise the can and use your thumb to
hold it in a raised position. WARNING: disabling the progress capture function
presents a fall risk for the load.
Drop-resistant pulley
To avoid losing your NANO TRAXION, you can install a cord in the keeper
cord hole.
Performance
Breaking strength when used as pulley: 15 kN.
Breaking strength when used as progress-capture pulley: 4 kN.
Hauling efficiency: F = 1.1 M.
Efficiency: 91 %.
Uses
8a Hauling
8b. Hauling
8c. Rope ascent
WARNING : do not climb above the ascender or the anchor point and keep
your rope under tension. In case of a fall, the energy is absorbed by the
rope. Shock loading must absolutely be avoided when close to the anchor.
Additional information
This product meets the requirements of Regulation (EU) 2016/425 on personal protective equipment. The EU declaration of conformity is available at Petzl.com.
When to retire your equipment:
WARNING : an exceptional event can lead you to retire a product after
only one use, depending on the type and intensity of usage and the environment
of usage (harsh environments, marine environments, sharp edges, extreme
temperatures, chemicals…). A product must be retired when:
- It has been subjected to a major fall or load.
- It fails to pass inspection. You have any doubt as to its reliability.
- You do not know its full usage history.
- When it becomes obsolete due to changes in legislation, standards, technique or incompatibility with other equipment… Destroy these products to prevent further use.
Icons:
A. Unlimited lifetime –
B. Acceptable temperatures
C. Usage precautions
D. Cleaning
E. Drying
F. Storage/transport
G. Maintenance
H. Modifications/repairs (prohibited outside of PeW facilities, except
replacement parts)
I. Questions/contact 3-year guarantee Against any material or manufacturing
defect. Exclusions: normal wear and tear, oxidation, modifications or
alterations, incorrect storage, poor maintenance, negligence, uses for which
this product is not designed.
Warning symbols
- Situation presenting an imminent risk of serious injury or death.
- Exposure to a potential risk of accident or injury.
- Important information on the functioning or performance of your product.
- Equipment incompatibility.
Traceability and markings
a. Meets PPE regulatory requirements.
Notified body performing the EU type examination
b. Number of the notified body responsible for the production control of this
PPE
c. Traceability: datamatrix
d. Diameter
e. Serial number
f. Year of manufacture
g. Month of manufacture
h. Batch number
I. IndMdual identifier
j. Standards
k Read the Instructions for Use carefully
I. Model identification
m. Load – n. Hand
o. Manufacturer address
p. Orientation of use
TECHNICAL NOTICE NANO TRAXION
P0015600B (210920
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>