Tuya 63А WIFI Relay with Energy Monitoring User Manual
- June 13, 2024
- Tuya
Table of Contents
Tuya 63А WIFI Relay with Energy Monitoring
Product Information
The Din Rail Wifi Smart Meter is a versatile device that allows you to monitor
and control your electrical consumption conveniently. It is designed to be
installed on a DIN rail, making it suitable for both residential and
commercial applications.
Function
The Din Rail Wifi Smart Meter offers the following functions:
- Real-time monitoring of electrical consumption
- Remote access and control via Wi-Fi connection
- Overvoltage and undervoltage protection
- Adjustable electric current settings
- Compatible with single-phase AC power supply
- Supports a wide voltage range of AC80v-400v
- Works with a rated frequency of 50/60Hz
Technical Parameters
| Parameter | Value |
|---|---|
| Rated Supply Voltage | AC 220V |
| Operation Voltage Range (single phase) | AC 80V – 400V |
| Rated Frequency | 50/60Hz |
| Electric Current (>A) setting range | 1-63A |
| Overvoltage (>U) setting range | 250-300V (adjustable) |
| Undervoltage (U) setting range | Not specified |
Product Usage Instructions
To use the Din Rail Wifi Smart Meter, please follow these instructions:
- Ensure that the device is installed on a compatible DIN rail in a suitable location.
- Connect the meter to the AC power supply using the appropriate wiring.
- Make sure the rated supply voltage matches the voltage of your electrical system (AC 220V).
- Set the desired electric current (A) within the range of 1-63A based on your requirements.
- Adjust the overvoltage (>U) setting within the range of 250-300V to enable protection against excessive voltage.
- Connect the Din Rail Wifi Smart Meter to your Wi-Fi network following the provided instructions.
- Download and install the associated mobile app or access the meter’s web interface to monitor and control your electrical consumption remotely.
Note: Consult the user manual for detailed instructions on configuring additional settings and accessing advanced features of the Din Rail Wifi Smart Meter.
Function
- Remote control at any time from anywhere
- Schedule/Timer/loop timer
- Energy monitoring
- Under voltage protection 150V-190V (adjustable) (default:170V)
- Over-voltage protection 250V-300V (adjustable) (default: 270)
- Over-current protection 1A-63A (adjustable) (default:63A)
- Electric leakage protection:10-99mA
- Preset current/voltage threshold values by app. Once the real-time/current/voltage reaches the threshold values, The connected electrical appliances will be turned off automatically.
Technical Parameters
- Rated Supply Voltage: AC 220V
- Operation Voltage Range: AC80v-400v(single phase)
- Rated Frequency; 50/60Hz
- Electric Current (A)setting range: 1-63A
- Overvoltage (>U) setting range:250-300V (adjustable)
- Undervoltage(<U) setting range:150-190V (adjustable)
- Electric Leakage Protection: 10-100mA(This feature can be turned off)
- Error:2%
-
U and U trip delay:0.5s
- Reset/Start Delay:5s-90s
- Voltage Measurement Accuracy:1%(Not exceeding 1% of the overall range)
- Rated Insulation Voltage:400V
- Output Contact:1NO
- Altitude:$2000m
- Operating Temperature: (-30°C^70°C Power Display
- Range:0-99999.9kwh
Parameter Settings
- Click to view each data
- Press for 5 seconds to enter setup mode, and then press to select. press and key to adjust the set
Network Connection
Press for 5 seconds until the WIFI indicator blinks quickly to enter the
network connection
- Scan the OR code underneath with the mobile OR code scanning tool. o Search “Tuva smart” at the stall application market to download
- Connect home Wi-Fi on your mobile phone and start the “Tuva smart” APP
- Follow the instructions in the APP to register/login to the APP account and add a new device.
- After finishing adding a new device, vou can use an APP to control your device conveniently.
- APP is based on the actual released version
Network Settings
family at we copter comer ad life dick first the spotlight corner to enter the
device addition setting page.
Click “All devices” and find out the “Energy” item to select. Turn the power on of the power meter and press the Key for 5 seconds till the network indicator flashes rapidly, click the “confirming the indicator is flashing rapidly Button.
Input the password of the connected Wi-Fi, Only supports 2.4G wireless network, 5G wireless network is not supported. The existence of Chinese Characters in the Wi-Fi name and password is currently not supported, it may cause the APP fail to add a new device. Click “Confirm” and wait for the connection. When finish the connection and add the device successfully, you can set the installation room of the device. The switch button and central power button can control the power on/off of the device.