ZIP IPCAI918 8MP AI IP Varifocal Bullet Camera User Guide
- June 13, 2024
- Zip
Table of Contents
8MP AI ZIP IP Varifocal Bullet 2.8-12mm
Zip is a registered trademark of System Q Ltd
Quick Start Guide
User Information
- The camera must not be exposed to conditions above the IP66 rating.
- Do not touch the camera connections with wet hands.
- There are no user serviceable parts in the camera and opening or attempting to repair the product will void the warranty.
- Only use a regulated 12V DC Supply or a Type 802.3af or above PoE Supply.
- Do not install or use the camera if damaged.
Full Instruction Manual
www.systemq.com/PDF/manual/xIPCAI918.pdf
The IPCAI918 is a bullet style camera with on board face detection features
plus iSENSE compatibility for Face Recognition when used with the latest Zip
NVR firmware. Up to 45m IR range (true day/night filter), 8MP resolution,
built in PoE, H265 and H264 codec. 
Powering the camera
Option 1 – Power the camera from 12V DC (via the 2.1mm DC Socket), the
current consumption is 750mA. The camera is polarity sensitive so connections
must be correctly made.
Option 2 – Power the camera using a
PoE 48V RJ45 Socket
When connecting ZIP PoE NVR plug the camera directly into the NVRs built in
PoE switch.
The camera should automatically become visible after being connected for
approximately 1 minute.
www.zipdvr.com/howto/TIP459-How-To-Add-
IP-Cameras.html
If using a separate PoE switch or an IPmitter (wireless bridge), the camera needs to be manually configured, scan the QR code to the left for the “how to guide”
Use the ZipFinder tool to search for ZIP IP cameras on a network via a Windows
PC.
www.softcctv.com/store/Item/Zip-Finder-IPCCTV-Security-Camera-Discovery-
Tool
Default login details are:
| Default IP | 192.168.10.1 |
|---|---|
| User Name | admin |
| Password | 777777 |
| Image Sensor | 1/ 2.8” Progressive CMOS |
|---|---|
| Resolution | 8MP 3840(H)× 2160(V) |
| Lens Type | 2.8-12mm Motorised |
| Shutter | 1/5 ~ 1/20000s |
| Day/Night | Mechanical (True Day-Night) |
| Min. Illumination | 0 (With IR On) |
| IR Range | Up to 45m |
| Digital Noise Reduction | 3D DNR |
| Video Compression | H.264 / H.265 |
| Video Bitrate | 256Kbps ~ 16Mbps |
| Stream Options | Mainstream, SubStream & MobileStream |
| iSENSE AI Features | Perimeter Intrusion, Line Crossing, Pedestrian and Vehicle |
Detection, Facial Detection, Facial Recognition, Stationary Object detection,
Cross Counting, Heat Map, Crowd Density, Queue Depth, Rare Sound Detection,
License Plate Detection
System Compatibility| ONVIF (Profile S, Profile G, Profile T)
Connection| RJ45 10M / 100M Ethernet PoE
SD Card| Micro SD Card Slot (up to 128GB)
Alarm| 1 Input / 1 Output
Audio (RCA)| 1 Input / 1 Output
Input Voltage| PoE or 12V DC 750mA (PSU Required)
Consumption| 9W Max
Operating Temperature| From -35 to 60 deg°C
Backlight Control| BLC / WDR
Use| IP66 For External Use
All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. Whilst every effort is made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible for any losses, no matter how they arise, from errors or omissions in these instructions, or the performance or non- performance of the equipment refered to.
**** This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery and recycling please return to your local designated WEE/CG0783SS collection point as defined by your local council.
Document ref: qIPCAI918
© 2023 System Q Ltd
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>