AV Access 4KEX70-ARC-H2 HDMI 2.0 ARC Extender Over HDBT User Manual

HDMI 2.0 ARC Extender over HDBT
4KEX70-ARC-H2 User Manual

Introduction

Overview
4KEX70-ARC-H2 is an HDBaseT Extender. It supports 4K@60 4:4:4 with HDR and HDCP 2.2 compliant, offers the distribution of uncompressed UHD video, audio, power, and IR together up to 40m/131ft over a single Cat X cable. By the DIP switch of Audio Output on the receiver, it’s able to configure the ARC channel feed by TV (with ARC support), or auxiliary S/PDIF Input port. It also supports bi-directional IR pass-through, which enables users controlling the display at transmitter side or control the source at receiver side. This suit also provides an HDMI audio de-embedding with phoenix analog connector. Its proprietary two-way PoC technology, with LED indication for visual power supply to units and signal status to show established connection between connected devices.
Features

• 4K/UHD capability @60 Hz with 4:4:4 Chroma sampling, plus support for HDR formats.
• HDCP 2.2 compliant.
• Supports HD signal transmission up to 60 meters (1080p) and 35 meters (4K@60Hz YUV 4:4:4) via a single Cat 5e/6 cable.
• Supports HD signal transmission up to 70 meters (1080p) and 40 meters (4K@60Hz YUV 4:4:4) via a single Cat 6a/7 cable.
• Visual Lossless Compression enables 4K@60 HDR extension over HDBaseT.
• Receiver to transmitter audio return via ARC or digital coax pathway.
• HDMI audio de-embedding with phoenix analog connector.
• Extends RS232, IR control signals.
• Support nonstandard bi-directional PoC power supply.

Package Contents
Before you start the installation of the product, please check the package contents:

• Transmitter x 1
• Receiver x 1
• Power Adapter (DC 12V 3A) x 1
• IR Emitter x 1
• IR Receiver (30 KHz ~ 50 KHz) x 1
• Mounting Brackets (with Screws) x 4
• User Manual x 1

Panel
Transmitter

OFF: The transmitter is powered off.
2| STATUS LED| Flashing Slowly: The transmitter is working properly.
OFF: The transmitter is not working properly.
3| HDCP LED| ON: HDCP content is being transmitted.
Blinking: Non-HDCP content is being transmitted.
OFF: No HDMI signal.
4| LINK LED| ON: HDBT link is normal.
OFF: No HDBT link or link error.
5| Audio Out| HDMI audio de-embedding, connect to audio system like AV receiver.

Receiver

OFF: The receiver is powered off.
2| Status LED| Flashing Slowly: The receiver is working properly.
OFF: The receiver is not working properly.
3| HDCP LED| ON: HDCP-protected content is being transmitted.
Flashing Quickly: Non-HDCP content is being transmitted.
OFF: No HDMI signal.
4| Link LED| ON: HDBT link is normal.
OFF: No HDBT link or link error.
5| Audio Control| ARC, configure ARC channel feed by TV S/PDIF In, configure auxiliary S/PDIF input, pass optical audio from RX to TX unit.

Installation and Application

Brackets Installation
Note: Before installation, please ensure the device is disconnected from the power source.

1. Remove the four screws that secure the side panels to the transmitter/receiver (see figure 1).
2. Position and install the mounting brackets with the four mounting screws provided (see figure 2).
3. Mount and secure the transmitter/receiver to a surface or a suitable location with the mounting screws.

Application Note: Slide the “Audio Control” DIP switch to “ARC” mode. Detail information, please refer to “Audio DIP Switch Control” section.

Audio DIP Switch Control

The Extender features an Audio DIP Switch that can be used to control audio output. ARC Mode
Note: When you want to configure ARC channel feed by TV:
Ensure AV System and TV support ARC function and CEC should be open.

• Connect AV System and TV through ARC- enabled HDMI Ports of transmitter and receiver.
• Connect the transmitter and receiver. Switch the DIP switch to ARC mode.
• Set CEC function of TV to on.
• Switch the AV System to ARC channel.
• The audio signal of TV through HDMI OUT port will be transmitted to the AV System connected to HDMI IN Port of transmitter. (Figure 1)

S/PDIF IN Mode
When you configure the auxiliary S/PDIF input, please switch it to S/PDIF IN mode and connect an audio system to the S/PDIF IN port of receiver, and an Audio System such as an AV Receiver to S/PDIF OUT port of transmitter.
Audio signal from S/PDIF IN port will pass through to S/PDIF OUT port. (Figure 2)

Operate with RS232

According to the bi-direction RS232 pass through function, you can use two RS232 control systems for serial communication by connecting to the devices via serial cables in order to control the source device or the display.

Specification

Technical

Input/Output
Resolution
Supported| 800×60⁸, 1024×768⁸, 1280×768⁸, 1280×800⁸,1280×960⁸, 1280×1024⁸, 1360×768⁸, 1366×768⁸, 1440×900⁸, 1600×900⁸, 1600×1200⁸, 1680×1050⁸, 1920×1080⁸, 1920×1200⁸, 3840×2160²,³,⁵,⁶,⁸, 4096×2160²,³,⁵,⁶,⁸
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz,
4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz,
7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 75 Hz;
Audio Format
Supported| HDMI: Fully supports audio formats in HDMI 2.0 specification, including PCM, Dolby TrueHD,
Dolby Atmos, DTS-HD Master Audio, DTS:X
S/PDIF: PCM 2.0, Dolby Digital, DTS 5.1
Maximum Data Rate| 18Gbps

General

±4kV (Contact discharge)
Surge Protection| Voltage: ±1 kV
Power Consumption (Max)| Receiver is powered by transmitter: 18.72W
Transmitter is powered by receiver: 18.96W
Transmitter and receiver are powered
separately:
Transmitter: 8.4W
Receiver: 6.6W
Device Dimension (W x H x D)| Transmitter/Receiver:
195mm x 21mm x 94.8mm/7.68” x 0.83’’ x 3.73”
Product Weight| Transmitter/Receiver:  0.4kg/0.88lb

Transmission Distance
Note: We recommend the use of T568B straight-through category cables.

Warranty

Products are backed by a limited 1-year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicable.

1. The original serial number (specified by AV Access Technology Limited) labeled on the product has been removed, erased, replaced, defaced or is illegible.
2. The warranty has expired.
3. The defects are caused by the fact that the product is repaired, dismantled or altered by anyone that is not from an AV Access Technology Limited authorized service partner. The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the applicable User Guide.
4. The defects are caused by any force majeure including but not limited to accidents, fire, earthquake, lightning, tsunami and war.
5. The service, configuration and gifts promised by salesman only but not covered by normal contract.
6. AV Access Technology Limited preserves the right for interpretation of these cases above and to make changes to them at any time without notice.

Thank you for choosing products from AV Access.
If you have any question, please contact us via the following emails: General Enquiry: info@avaccess.com
Customer/Technical Support: support@avaccess.com

www.avaccess.com
info@avaccess.com

References

• AV Access | Quality & Budget Assured Pro AV Product Manufacturer

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>