4HOMES BW2019 Electric Wall Standing Fireplace Heater User Manual

: June 13, 2024
: 4homes

Table of Contents

4HOMES BW2019 Electric Wall Standing Fireplace Heater User Manual
Electric wall / standing fireplace
SAFETY REGULATIONS, WARNINGS
SPECIAL REQUIREMENTS
INSTALLATION
MALFUNCTIONS
Proper disposal of the appliance (Electrical appliance)
Information requirements for electric local space heaters
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

4HOMES BW2019 Electric Wall Standing Fireplace Heater User Manual

Electric wall / standing fireplace

Legend

Attention, danger!
The safety regulations marked with this symbol must be observed. Ignoring them can cause serious and far-reaching health damage as well as immeasurable material damage!
Important information!
Here you will find explanatory information and tips to help you use this device optimally!
Read the user manual!
Do not cover the device!
Do not dispose of the product together with household waste, but hand it in at the local collection point for recycling!
Do not dispose of cell batteries together with household waste, but hand them in at the local collection point for recycling!
Waste sorting signal!
Environmentally friendly disposal of packaging!
Protect from moisture!
Set the packaging unit to the top!
Fragile packaged goods!

Dear Customer! Thank you for choosing our product, we hope you enjoy using it for a long time.
There is nothing better than to cuddle with our loved one in front of the fireplace on a cold winter day. This multifunctional standing or even wall- mounted fireplace is the perfect replica of the original fireplaces: it contains realistic, flaming effects and glowing, smoldering pieces of wood, but it can also be used as a radiator. Egyszerűen, tiplikkel és csavarokkal rögzíthető a bármilyen falra or install the leg and use it as a standing heater. A romantic atmosphere is guaranteed. n cold winter nights, you can adjust the intensity of the radiator (950 W, 2000 W) at two power levels on request, which is suitable for occasional, intermittent heating of a room of up to 30 m². This way, not only the sight but also the feeling of warmth will be realistic. Precise temperature control is ensured by a built-in thermostat, which can be set using the accessory remote control. The flame effect can be used independently of the heating function, so you can admire the magical atmosphere of a „burning fire” in the fireplace at any time of the year.

It can be operated safely
There is no fire, spark, soot
It is characterized by two heating capacities and high heating power
Weekly timer
Overheating protection
Rugged frame
Strong wall bracket and legs
Included remote
It is deceptively similar to real fireplaces
The light effect can be switched separately, adjustable brightness

Attention! Some points on the cover may become hot due to heat radiation!

Design:	standing / wall mounted
Power source:	AC 220 – 240 V, 50 / 60 Hz
LED power:	1.6 W
Heating power:	950 – 2000 W
Recommended use:	max. 30 m² room
Operation temperature:	15 °C – 30 °C
Direct heat power:	950 – 2000 W
Energy class (EU2021):	Class “G”
Remote control power source:	1 x CR2025 battery (included)
Built in thermostat:	yes, manual
---	---
Protection:	IP20
Overheating protection:	yes
Noise level:	50 dB
Power cable length:	150 cm
Material:	metal + glass
Size:	55,5 x 16,2 x 43,2 cm
Color:	black
LED:	3V, min 1 – max 2 lumen/LED (20 mA), 2700 Kelvin

This product contains a light source with an energy efficiency class of „G”!

USER MANUAL

SAFETY REGULATIONS, WARNINGS

DANGER

General advice: Danger of suffocation! Please keep the packaging of the appliance out of the reach of children as it may lead to suffocation. The appliance may only be used by adults, the storage location must be chosen in such a way that children cannot accidentally access it. Children should be supervised to ensure that they do not play with the appliance.
Danger of electric shock: Never operate the appliance with wet, wet hands! Touching the device, including the power plug and cable, with wet hands is strictly prohibited! The device may only be connected to AC power with the correct voltage. Do not point the device directly at electrical equipment, as hot air may enter and cause damage. Do not use the appliance near a bathtub, shower, swimming pool or sink containing water. Unplug the appliance only by grabbing the mains plug.
Operation: Make sure of environmental regulations before use! Do not use the device near explosive material! When used in special places (eg. petrol station, pools…) the local safety regulations must be followed! Place the appliance horizontally and stably, make sure that the appliance does not tilt or tip over! Do not cover the appliance with anything (sheets, blankets…)! To reduce the risk of fire, do not place the appliance closer than 2 m to furniture, objects or walls! The appliance must not be operated from a socket with a timer! The appliance is not suitable as a primary heating source for rooms. The appliance is designed for intermittent (short-term) heating.

WARNING

General advice: The device may only be used for its intended purpose! When using, pay attention to the physical safety and safety of those around you (especially children). The device may only be used by persons who have read, understood and are able to operate this device accordingly! Persons with reduced mental, physical or sensory capabilities should not use the device! Children should not use the appliance! After using the appliance, make sure that the hot appliance can cool down in a well-ventilated place in a way they won’t cause personal injury to anyone! Inform those around you about the operating status of the device.
Risk of electric shock: Only connect the appliance to a mains socket that is safe to operate or has been installed by a specialist in accordance with IEC 60364-1. Before each use, make sure that the appliance and the mains cable and connectors are intact! Only use undamaged devices! If you experience any damage, do not use the appliance, contact a specialist! During use, pay attention to the integrity of the mains cable, avoid edges or objects that can damage the surface of the cable. Avoid the use of extension cords or splitters, as they are a source of danger during operation. Always unplug the appliance when not in use! Maintenance work must only be carried out with the mains plug removed!
Operation: Risk of burns! Never touch the part of the radiator (bottom) or point it at close range to other people or animals! To avoid burns, always allow the appliance to cool down before you touch it! The device may only be operated when fully assembled with the factory accessoriesIf any part is damaged, it must be replaced before use. Allow the appliance to cool down completely in a well-ventilated place before storing it. During use, periodically check that the appliance is not overheated and that the ventilation openings are not blocked.

CAUTION

General advice: Do not use the device if you have previously dropped or struck it and it is visibly damaged! It is strictly forbidden to, modify or disable safety devices, you must use as intended!
Operation: Always operate and store the device as described always check the integrity of the appliance, cable, plug and accessories In the event of damage, do not use the device!

ATTENTION

Operation: Use the appliance only at freezing temperatures above 0 °C to avoid condensation and electric shock. Never leave the appliance unattended when it is connected to the mains! Protect the device from moisture and water! Do not store the device outdoors in high temperature fluctuations.

ATTENTION!
Certain parts of the product may become hot and cause burns. Requires increased attention near children.

SPECIAL REQUIREMENTS

ATTENTION!
The radiator does not include a device to control the temperature of the rooms. Do not use it unattended in a room with people who cannot leave.

ATTENTION!
In case of wall mounting leave 100 cm free space above the radiator and 200 cm in front of the radiator. Never use the radiator in a room with flammable, explosive oil, gasoline or gas.

INSTALLATION

Standing mode: Place the device on a soft, stable surface while mounting the feet. Make sure that the glass part of the appliance is not damaged! Screw the 2 feet to the bottom of the appliance using the 4 + 4 screws supplied with the fireplace. After attaching the feet, place the device on the ground and make sure it is stable and not rocking.
Wall mounting: Install the appliance at least 30 cm high on the wall, so that the distance between the ceiling and the appliance is at least 100 cm. We recommend placing the lower part of the appliance at a height of 60 cm from the ground to ensure the best visual experience in the fireplace flag fire. A safe installation requires at least two people!
The included mounting accessories provide mounting on brick, concrete, silicate walls. When mounted on a plasterboard wall, it can only be installed on a horizontal support structurePrior to installation, make sure that the wall section has the correct load capacity and can provide the power supply for the device in the given location. When attaching to drywall, use a special drywall dowel, not the one included in the package! When fixing to a wooden surface, it is not necessary to pre-drill the holes and use dowels for the screws!

Using a spirit level and pencil, draw a horizontal line to the wall at the desired height.
Mark the location of the screws on the horizontal line, on which you will mount the device. The measured distance between the screws is: 26.7 cm.
Drill the holes for the fireplace.
Insert the supplied dowels into the holes until they are aligned with the plane of the wall.
Screw the screws into the dowels so that you can just hook the screw head into the fixing lugs of the fireplace.
Place the fireplace on the screws and make sure it fits snugly and accurately.
Before connecting to the mains, make sure that the main switch is off.

How to use the device
There are two ways to control the fireplace:

Using the buttons on the fireplace
Accessory with remote control

Control by the fireplace panel
When controlling the fireplace, please note that it takes a few seconds for the control unit to receive the given instruction and process it.
Turn on fireplace: By pressing the button, the fireplace switches on and the heating starts automatically. You can set the functions you need. Pressing the button again turns off the fireplace.
Set the exact time: You can set the real time by pressing the button. Day (Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday), hours and minutes.
Brightness setting: By pressing the button. By pressing the + button, the fireplace is brighter and has more brightness. You can reduce the brightness by 4 levels by pressing the – button.
Setting the heat output: Press the button once to select the low heating level. Press twice in succession to set the high temperature. If you press the button again, the fireplace heating will stop and the fan will start 10 seconds after the heating is stopped. Temperature control is possible on the remote control.

Control by remote
Remove the foil from the battery compartment of the remote control, and the remote control will be ready for use.
Use the same buttons you found on the fireplace control. The remote control is using infrared technology, so point the remote control the fireplace you want to control. The infrared signal works from a maximum distance of 4-5 meters, make sure that no objects or people get between you and the fireplace during the control.

Timer set up ont he remote: After pressing the button, press the button to chose ON/OFF. This allows you to change the timing of switching on or off at a given time. Please do not set the timer for a period when you cannot monitor its operation! After commissioning, check that all timers are off.
Temperature adjustment: You can also set the temperature on the remote. Press the heating button (once or twice depending on the desired power level), then adjust the temperature in the range of 15 to 30 degrees Celsius using the “+” and “-” buttons.

Overheating protection
If the device overheats for some reason, it will turn off automatically. Remove any objects that have caused overheating. To safely restart the fireplace, turn off the power for 15 minutes. Once the appliance has cooled down, it will switch on again.

Cleaning
Always switch off, unplug and let the appliance cool down before cleaning. Use a dry cloth or vacuum cleaner to remove dust. The housing should only be wiped with a slightly damp cloth, making sure that no moisture enters the device! Do not use chemicals or alcohol during cleaning!

Storing
Store in a cool, dry place. Do not throw away the product box. You can use it to store the device when not in use. Caution Only put the appliance back in its box if it has cooled down properly.

MALFUNCTIONS

Reason	Solution
Does not work / fan does not rotate.	Check the safety shutdown mode. (The

unit has overheated or shut down for some reason.
The following icon is displayed on the device stopped:| The device is working properly. It’s been sensed that the air in the room had cooled by 5-10 degrees. For economical use, make sure that one of the doors and windows is not open.
The flame effect does not work.| Check the LEDs, restart the device
Remote control does not work.| Check the polarity of the battery and whether it needs to be replaced.It may be too far from the fireplace or some landmark may be in the way of the signal.

Proper disposal of the appliance (Electrical appliance)

(It is valid in the European Union and in all other European states that participate in selective collection) According to Directive 2012/19 / EU, electrical waste and appliances must not be disposed of with household waste. Old appliances should be placed at a collection area to maximize the recycling of raw materials, thus reducing their impact on human health and the environment. The crossed-out wheeled bin symbol is attached to all products it requires to be collected separately. Consumers should contact their local authorities for more information.