B D 161064_02 Wireless Camera Outdoor User Guide

B D 161064_02 Wireless Camera Outdoor

CONSIDER: setting up camera via ethernet cable before installing in position.

OPEN THE PACKAGING

STEP ONE

OPTIONAL: insert SD card into camera now for recording before connecting power (requires FAT32 format, 32GB – 128GB)

ADDING THE CAMERA

Before you continue, ensure you have the B&D App downloaded to your smart phone and your smart opener or hub is set up.

STEP TWO

STEP THREE

Follow the on screen instructions to add a camera to your existing opener/hub

CONSIDER: mounting the camera in a position that provides a clear / unobstructed view.

MOUNT THE CAMERA

ELECTROCUTION! Be mindful not to drill into existing wiring as this may result in serious harm and or death.

STEP FOUR

**** Check out the HELP menu on the home page in the APP for more instructions

CONFIGURE THE CAMERA

STEP FIVE

CAMERA DETAIL

refer to bnd.com.au for full warranty details.

RESET THE CAMERA

To restore the camera back to factory settings:

1. Hold the Reset button for about 10 seconds with the camera powered on.
2. Release the button and wait about 30 seconds.

The camera will automatically restart, and restore factory settings.

CHANGE WI-FI NETWORK

First, setup the Smart Hub on the new network and then:

1. Open the Smart Hub phone app and remove the camera from the Smart Hub.
2. Reset the camera using the instruction above.
3. Re-follow the instructions “Adding the Camera”.

References

• B&D Garage Doors - Safe and Secure Australian Garage Doors - B&D Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>