singke SKG03 Night Running Bone Conduction Headphones User Guide

singke SKG03 Night Running Bone Conduction Headphones

Packing List

LED Light Indicator

Power on / off / charge indicator

• Power on / Blue light turn on

• Red light turn on during charging

• 55 Power off

• Power off: Red light will turn off after 5 seconds

• Bluetooth / Music Operation

•  Pairing status red / blue light alternately flashes

• / 5S Blue light flashes once every 5 seconds
  Music play / Music pause / connection succeeded Call in / Calling

• /5s

• Red light flashes once every 5 seconds

• Low battery alarm: Flashes once every 2 minutes when the battery is below 10%

Technical Specifications

• Bluetooth Protocol: A2DP, AVRCP, HSP, HFP

• Communication distance: 10 meters

• Continuous playback: about 8 hours

• Talk time : about 8 hours

• Standby time: about 180 hours

• Charging time : about 2 hours

• Charging voltage: 5.25V‡5%
  Battery type : Li-ion battery ( 3.7V/160mAh)

• Bluetooth: 5.2

• Headphone material: Plastic / Silicone / Titanium alloy

• Headphone weight: 26 grams

• Waterproof and dustproof grade : IP67

Functional Operation

1. Power on / Power off
2. Pairing
   Step 1: After powering on, the red and blue lights flash alternately and quickly, and enter the pairing mode. If only the blue light is on after booting, press the “+” and “-” keys at the same time for 6 seconds to enter the pairing mode;
   Step 2 : Turn on the Bluetooth of the mobile phone and search for “GO3” and click to connect. (The blue light flashes once for 5 seconds when the connection is successful)

• Note
• When pairing, please keep the distance between the headset and the mobile phone within 1 meter;
• Boot into pairing mode, the red and blue lights flash alternately;
• Turn on the BT function of the mobile phone, search for the BT device and select the “G03” headset;
• If you need to enter the pairing code, please enter “0000”;
• If the pairing fails, repeat the above operation;
• After successful pairing, the blue light flashes slowly.

Notice

1. When the connection distance with the device exceeds the effective distance of BT (10 meters or 33 inches), the headset will be disconnected from the device. Afterwards they automatically reconnect once they are again within BT’s effective distance;
2. If the headset has been connected to the device, when it is turned on again, the BT headset will automatically reconnect to the last BT device;
3. If the pairing is successful after booting, press and hold the “+ and *-” buttons for 6 seconds, and then you will re-enter the pairing mode when you hear the prompt tone, and other mobile phones can be connected to this headset

Function of the Key

Battery Warning Description
Do not disassemble, bump, squeeze or throw into fire. Do not place in high temperatures, damaged or modified batteries can lead to unpredictable dangers such as fire,explosion or personal injury.

Storage and Maintenance

The headphones should be stored in a cool dry place. The working temperature should be at 0 to 45°C. Working in overcooling, overheating or excessive humid environments may shorten the life of the battery. After storage for a long time, charge it again before use. The headphone is splash-proof, but not completely waterp-roof. Please do not immerse the earphone in water. Listening to music under high volume may damage your hearing, and the sound may be distorted. Please clean your headphones with a soft dry cloth. Please use a soft dry cloth to clean the headset. Please do not charge immediately after exercise, in order to avoid residual sweat in the charging port which may cause damage to the earphone circuit. Keep the charging port dry before charging to reduce the risk of damage.

Optional Accessories
On a plane or train, it can be used in conjunction with earplugs to isolate external noise, and experience better bone conduction sound.

1. Knead the earplugs small and plug them into your ears.
2. When playing music, press and hold the volume minus key to properly reduce the volume and feel the best listning experience.

Charging Method

Notice:

1. Since the battery may lose power during storage, it is recommended to charge the headset before using it for the first time.
2. The headset cannot be used during charging.
3. If it is not used for a long time, it is recommended to charge it once a month to maintain the life of the battery.
4. If the headset is not connected to the device for more than minutes, the headset will automatically shut down.

Warranty

Warranty Regulations
When the user purchases the machine, a manual and a warranty card are included with the machine. After the user fills it out, keep it properly as a warranty certificate.

1. From the date of purchase, if the headset has problems under normal use within one year, cardholders can enjoy free warranty service. The following are not covered by the warr -anty:
   • A: The warranty card does not have the signature and seal of the sales unit;
   • B: Damage caused by man-made or irresistible factors;
   • C: Normal wear and tear of the machine;
2. If the failure is caused by man-made, beyond the warranty period and irresistible factors, we will charge the mainten -ance cost;
3. When the product fails and needs to be returned to the factory for warranty, please contact our company and fill in the specific name, address, telephone number and failure phenomenon. Kn -ead the earplugs small and plug them into your ears.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>