Paul Neuhaus 4595-18 Adriano Table Lamp LED User Manual
- June 6, 2024
- Paul Neuhaus
Table of Contents
Paul Neuhaus 4595-18 Adriano Table Lamp LED User Manual
Functions
- Wireless charger to charge smart watches and mobile phones (with QI wireless standards)
- Calendar
User Manual
Battery change
Adjusting the display brightness
Operation Guide
2. Press “up” and “down” to setting. Week changes automatically when the date
change.
3. Press the “Mode” button to end or the setting mode will automatically end
after 1 minute.
4. In normal mode, press “up” button to switch between “12h” and “24h”
display.
• Snooze function setting:
-
In normal mode, press the “Mode” button to achieve alarm setting.
-
In alarm mode, press the “up” and “down” button to set the alma sequence.
[ Hour-Minute-Snooze duration-Alarm tone ] -
Press “up” and “down” to setting.
-
In alarm mode, press “up” und “down” to tum on/off alarm and snooze function. Press again to achieve next function sequence:
[ alarm on – snooze on – alarm off – snooze off ] -
When come to alarm lime, it will ring one minute, then snooze and ring again. Press any key to alarm off.
• Temperature setting:
In normal mode, press the “down” button to switch between “F” and ·c·.
Wireless charging
Place the mobile phone with the technical standard QI on the charging point for charging. As soon as the light indicator lights up red and the screen shows the connection, your device will be charged. If you device does not display the charging status, check whiter the device is correctly positioned on the charging point.
Specifications
Attention
- Do not l:!elf-di55amble the product. (Risk of electric shock)
- Use the induced power supply for the lamp to ensure normal operation.
- Do not over-adjust the joint activity partly, to avoid any damage to the lamp.
- Do not put the lamp on unstable desk to avoid the dropping out.
- Do not put the lamp into high temperature or high-humidity environment.
- Do not look at the LED light source. (Risk of eye damage) In cases below conditions scour, pull out the power cord and stop using the lamp.
- If needed, call for support staff:
- The power cord is broken.
- The lamp smokes or sparks.
- The lamp is abnormally flickering or the LED bulb is broken.
kundenservice@neuhaus-group.de
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>