OTL Microphone Karaoke Microphone With Bluetooth Speaker User Guide
- June 13, 2024
- OTL
Table of Contents
OTL MICROPHONE
KARAOKE MICROPHONE
WITH BLUETOOTH SPEAKER
USER GUIDE
CONTENTS
- Microphone
- Micro USB recharging cable
- Audio/recording cable
- User guide & warranty leaflet
SAFETY INSTRUCTIONS:
- Read all the instructions carefully before using the product and keep them for future reference.
- Do not immerse in water.
- Unsuitable for use by children under the age of 3 due to small parts which may cause choking.
- We recommend that children aged 3-7 are supervised by an adult whilst using the product, prolonged use is not advised.
- The device may become warm while charging.
- Set volume to low before turning on sound.
- Long-term exposure to loud noise may cause damage to eardrums or loss of hearing.
PRODUCT OVERVIEW
SPECIFICATION
Microphone: condenser microphone
Speaker output: 3W X 2
Frequency range 100Hz – 10KHz
Reverb mode: echo sound reverberation
Power supply: built-in Li-ion battery
Battery capacity: 1200 mAh
Charging voltage: DC5V
PAIR WITH BLUETOOTH DEVICES
Please ensure that the Bluetooth function has been turned on in the settings
of your Bluetooth enabled device. You must pair the karaoke microphone with a
Bluetooth enabled device before it can be used wirelessly.
You only need to pair your microphone to each Bluetooth enabled device once.
It will automatically reconnect to each device when turned on in its vicinity.
If two or more devices are available, the last device paired will be the one
that reconnects.
FIRST TIME USE/PAIR TO NEW DEVICE
The Bluetooth device should automatically start searching for the new play device (some may require you to select “search for/add new device”)
- On your Bluetooth device, go to “settings” –> “Bluetooth” –> turn on Bluetooth
- Turn the microphone on by pressing the power button for 3 seconds.
- The light will flash on and off to detect Bluetooth enabled devices near you and will enter pairing mode.
- “OTL MIC” will appear on the Bluetooth device list, select “OTL MIC” to establish pairing.
- When pairing is successful, the microphone will beep.
When you want to play audio from another Bluetooth device, disconnect the microphone from the original device and follow steps 1-5 to re-pair the microphone with a new Bluetooth enabled device.
HOW TO RECORD
- Connect the microphone to a smartphone*, audio device or laptop (see overview diagram for location) with Audio/recording cable (included).
- Open recording app and start recording.
- Some of the latest smartphones will require a separate adapter to connect the 3.5mm jack cable (not provided).
CHARGING THE MICROPHONE
Please charge your microphone before first time use.
- When the battery is low, please charge via the included USB cable. The charging time is approximately 2 hours and provides up to 6 hours of continuous operation.
- The light will be red during charging and will turn off once it is fully charged.
- When the battery is low, the microphone turns off automatically.
TROUBLESHOOT
- If an error occurs with the microphone, please turn off the microphone and restart it.
- When the microphone power is low, the Bluetooth range may be affected. Please charge the microphone to avoid disruption during use.
- Please see our website www.otltechnologies.com for general troubleshooting method instructions.
WARNING
- This product is not a toy.
- Do not disassemble, repair, or modify the microphone.
- Do not place product in or near fire to avoid danger.
- Do not store the microphone in extreme temperatures, this can shorten the battery life and may affect the microphone.
- Do not use microphone during a thunderstorm to avoid irregular function and increased risk of electric shock.
- Do not use harsh chemicals or strong detergents to clean the microphone.
- Keep the microphone dry.
- Avoid dropping the microphone as it may cause damage to the product.
INFORMATION ON DISPOSAL FOR USERS OF WASTE ELECTRICAL & ELECTRONIC
EQUIPMENT (PRIVATE HOUSEHOLD)
This symbol on the products and/or accompanying documents means that used
electrical and electronic products should not be mixed with general house hold
waste. For proper treatment, recovery and recycling, please take these
products to designated collection points, where they will be accepted on a
free of charge basis. Alternatively, in some countries you may be able to
return your products to your local retailer upon the purchase of an equivalent
new product. Disposing of this product correctly will help to save valuable
resources and prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste handling.
Please contact your local authority for further details of your nearest
designated collection point. Penalties may be applicable for incorrect
disposal of this waste, in accordance with national legislation.
www.otltechnologies.com |
[email protected]
Made in PRC
Oceania Trading Ltd/OTL Technologies
2 Dinsmore Road, London SW12 9PS, UK
Hullenbergweg 278-308, 1101 BV Amsterdam, Zuid-oost, NL