b d 100040 Autolock Panelift Icon Sectional Garage Doors Installation Guide
- June 13, 2024
- b d
Table of Contents
b d 100040 Autolock Panelift Icon Sectional Garage Doors
Product Information
The Autolock for Sectional Doors is a device that provides automatic locking and unlocking functionality for sectional doors. It is designed to enhance the security and convenience of door operation. The Autolock features LED status indicators, battery-powered operation, and optional smart phone control for remote monitoring and control.
LED Status Indicators
| LED Color | Lock Status |
|---|---|
| RED | FLASHING RAPIDLY – LOCKING |
| GREEN | ON – LOCKED |
| RED | FLASHING RAPIDLY – UNLOCKING |
| GREEN | ON – UNLOCKED |
| RED & GREEN | FLASHING SLOWLY – ERROR |
| RED & GREEN | FLASHING ALTERNATIVELY – LOW BATTERY / NO LINK WITH BASESTATION |
LED Status Indicators
RED| GREEN| LOCK STATUS
FLASHING RAPIDLY| | LOCKING
ON| | LOCKED
| FLASHING RAPIDLY| UNLOCKING
| ON| UNLOCKED
ON| ON| ERROR
FLASHING SLOWLY| FLASHING SLOWLY| LOW BATTERY
FLASHING ALTERNATIVELY| FLASHING ALTERNATIVELY| NO LINK WITH BASESTATION
Product Usage Instructions
Manual Lock Operation
To manually operate the lock:
- Check the lock position status on the LED display. The status will be shown for 10 seconds after lock movement or button press.
- If the Auto-lock LED’s red and green lights flash 3 times or are flashing slowly, it indicates low battery. Replace the lock batteries (2 x C-LR 14) immediately.
- To replace the batteries, unscrew the four screws on the main cover to remove it.
- Replace the batteries with two new C-LR 14 batteries.
- Refit the cover and secure it with the screws.
Disengaging the Auto lock
To disengage the Auto lock and open the door manually:
- Press the emergency lock/unlock button on the front of the Auto-Lock. This will disengage the locking bolt from the guide track.
- You can now manually open the door.
- WARNING: The emergency lock/unlock button should only be used in case of power outage or emergency and not as a primary means of locking the door under normal circumstances.
Use of the Lock/Unlock Button:
The emergency lock/unlock button is to be used only in case of power outage or
emergency.
Smart Phone Control (Optional)
The Smart Phone Control works via your home’s WiFi network. Initial set up
involves linking your phone app and smart opener to your home network.
If you have the optional Smart Phone Control feature, follow these steps to set it up:
- Download the B&D App on your smartphone.
- Remove the controls cover on the opener to access the buttons.
- Ensure that your WiFi router is within range of the opener.
- Open the App and click “Get Started”.
- Follow the on-screen setup instructions provided by the App.
- Once the setup is complete, refit the controls cover and test the opener operation through the App.
- When connected, you can view the operation of your Autolock and receive notifications from the App when issues arise.
Troubleshooting
| Symptom | Possible Cause | Remedy |
|---|---|---|
| Main light flashes 3 times on the opener | Low battery indicator | Change |
battery, then test operation of lock by pressing the lock/unlock button.
Door not moving and no lights on lock| Limited battery power| Press the (i)
button on the lock to check if there is power in the battery. If no lights,
change battery. If lights are present, refer to the LED status table.
Main light flashes 5 times| Lock is not unlocked and preventing the door from
moving| Check if there is anything obstructing the lock bolt movement. Press
the unlock button on each lock. If it does not move, contact
customer support.
Lock jammed| Red and green lights both on solid on the lock| Switch off power
to opener, then switch it back on after 30 seconds. If a battery backup is
installed, press and hold the STOP/SET button on the opener until power
ceases. Press the lock/unlock button on the lock to test operation. If it does
not move, contact customer support.
Red and green lights on one lock flashing slowly| Error with lock| Press the
unlock button on the lock to test operation. If it
does not move, contact customer support.
Red and green lights flashing alternatively| Low battery or no link to opener|
Change battery. If the issue persists, contact customer support.
Symptom| Possible cause| Remedy
---|---|---
main light flashes 3 times on the opener| low battery indicator| change
battery, then test operation of lock by pressing the lock / unlock button.
door not moving and no lights on lock| limited battery power| press the (i)
button on the lock to see if there is power in the battery. no lights –
change battery lights – check LED status table.
main light flashes 5 times| lock is not unlocked and preventing the door
moving| check lock, test by pressing lock/ unlock button. If it does not move
call 13 62 63.
lock is not unlocking and preventing doors movement| lock jammed| check if
there is anything obstructing the lock bolt movement. Press the unlock button
on each lock. If it does not move call 13 62 63.
red and green lights both on solid on the lock.| error with lock| press the
unlock button on the lock to test operation. switch off power to opener, then
switch back on after 30 secs (If a battery backup is installed press & hold
STOP/SET button on the opener until power ceases). Press the lock/ unlock
button on the lock to test operation. If it does not move call 13 62 63.
red and green lights on one lock flashing slowly| low battery| change battery,
then test operation of lock by pressing the lock / unlock button.
red and green lights flashing alternatively| no link to opener| press the
unlock button on the lock with flashing lights to disengage the bolt. Call 13
62 63 for assitance.
lock position status
The status normally displays for 10secs after lock movement / button press.
battery replacement
Battery Type: 2 x C-LR 14.
- Replace lock batteries (2 x C-LR 14) immediately when the Auto-lock LED’s red and green lights flash 3 times or are flashing slowly.
- Remove cover by unscrewing the four screws on the main cover.
- Replace batteries and refit cover and secure with screws.
- Test the Auto-lock operation by using the opener to open and close the door.
caring for your Autolock
Preventative servicing of your garage door, opener and autolock, is important.
Your autolock is made up of numerous moving parts designed to lock your door
every time you close it. Ongoing care ensures that your door continues to
function within factory specifications, greatly reduces the risk of failure
and repair bills down the track and ensures you maintain your Warranty. If the
Autolock is located in a very dirty / dusty environment, be sure to vacuum any
residue from the lock and bolt before continuing use.
WARNING: Do not use water, benzene or alcohol when cleaning the product,
as these fluids can cause product malfunction.
need a service call?
If the opener needs a service please call the dealer who installed the garage
door opener (their contact details are usually on a sticker on the back of
your garage door).
SCAN: for Installation Instructions
For product assistance, general enquiry or more information, please visit:
bnd.com.au or call 13 62 63.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>