PROCOOL RFMINI 03 Wireless Mini RGB Controller User Guide
- June 13, 2024
- PROCOOL
Table of Contents
PROCOOL RFMINI 03 Wireless Mini RGB Controller
Product Information
- Model: RFMINI-03
- Name: Wireless Mini RGB Controller
Specifications
- Wireless control
- Mini size
- RGB color changing
Features
- Wirelessly control your RGB lighting
- Compact and portable design
- Allows for color changing effects
Product Usage Instructions
To use the Wireless Mini RGB Controller, follow these steps:
- Connect the controller to your RGB lighting system. Ensure that the power is turned off before making any connections.
- Insert batteries into the wireless remote control.
- Turn on the power to your RGB lighting system.
- Use the wireless remote control to select the desired color or color-changing effect.
- The RGB lighting system will respond accordingly to the selected color or effect.
- To turn off the RGB lighting system, simply press the power button on the wireless remote control.
Note: Make sure to read the full user manual for detailed instructions and safety precautions.
- Model: RFMINI 03
- Name: Wireless Mini RGB Controller
Features
- Working Tempearture 20 60℃
- Voltage DC5~12V
- output 3 circles
- Controller Size L40.0×W12.0×H5mm
- Remote Size L85.9×W39.6×H6.9mm
- Net Weight 35g
- Gross Weight 40 g
- Energy Consumptioni ： <0.5W
- Output Current ： < every circle
- Output Power 5V: <30W, 12V:<72W
Exterior Size
Interface Instruction
Instructions for use
Instructions for code pairing:
Within 4 seconds after the controller is powered on, press the key to achieve
code matching. Only one code pairing is allowed each time the power is turned
on, and the code must be re powered on to check the code again. If the key is
not pressed within 4 seconds, the controller defaults to the pass code. Each
time it is powered on, it automatically restores to the state before the last
power off.
Remote control instructions
The remote control has 10 buttons:
- In any state, press to turn the controller on and off. Press this key within 4 seconds of each power on to check the code.
- Auto play button, in any state of power on, press this button and each dynamic mode will automatically run three times in turn.
- In the dynamic mode, press this key to switch to the static mode, and each press of the button will change a static color in the forward/reverse direction.
- In dynamic mode, press this key to switch to static mode. Each time you press the key, the brightness increases/decreases by one level, a total of 5 levels.
- In the static mode, press this key to switch to the dynamic mode. Each time you press it, the forward/reverse changes a dynamic mode.
- In static mode, press this key to switch to dynamic mode. Each time you press the key, the speed increases/decreases by one level, a total of 10 levels.
The line sequence of this controller is RGB, if it is othe r line sequence, the color change will appear in other order. Based on the premise that the line sequence is RGB, the mode table is as follows
| Serial| Mode| Serial| Mode| Serial| Mode
---|---|---|---|---|---|---
| no| | no| | no|
| 1| Seven-color| 8| Purple gradually brighter and
darker
| 15| Blue burst
| | gradient| | |
| 2| Three colors| 9| Blue fade in and out| 16| Purple
| | fade in and out| | | burst
| 3| Seven colors| 10| Three colors| 17| Yellow
Dynamic| | gradually| | jump| | burst
mode| | brighter and| | | |
| | darker| | | |
| 4| White becomes| 11| Six-color jumps| 18| White
| | lighter and| | | | flashes
| | darker| | | |
| 5| Green fades in| 12| Tri-color flashes| 19| Tri-color
| | and fades out| | | | burst
| | | | | | flashes
| | | | | |
---|---|---|---|---|---|---
6| Yellow gets
lighter and darker
| 13| Red flashes| |
7| Red fades and
fades
| 14| Green bursts| |
Static mode
| Serial
no
| Mode| Serial
no
| Mode| Serial
no
| Mode
1| Red| 8| Milky| 15| Blue purple
2| Green| 9| Dark yellow| 16| Yellow
white
3| Blue| 10| Sky blue| 17| Yellow
4| White| 11| Brown| 18| Cyan
5| Orange| 12| Pink white| 19| Purple
6| Light green| 13| Light yellow| 20| Blue white
7| Dark blue| 14| Light blue| |
Example
Pay attention
- The power supply voltage of this product is DC5~12V, and it must not be connected to other voltages;
- The lead wires should be wired correctly according to the color and label provided in the wiring diagram;
- This product cannot be overloaded.
For your convenience, click the below link or scan the QR code to view the
video manual:
https://www.youtube.com/watch?v=9EUPQPAALso
Tel: 0086-757-22204899 sales@procoolmfg.com www.procoolmfg.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>