LevelOne GVT 2014 RJ45 to SC Gigabit Media Converter User Guide
- June 13, 2024
- LevelOne
Table of Contents
LevelOne GVT 2014 RJ45 to SC Gigabit Media Converter
Product Information
Quick Installation Guide
Gigabit Media Converter, PoE PSE
Package Contents
This product is provided with the following accessories in the box :
please check them carefully. If any of the accessories is missing or damaged,
please contact with your local dealer timely.
| Serial number | Name | Quantity | Note |
|---|---|---|---|
| Master unit | Required | ||
| Power Adapter | Required | ||
| Quick Installation Guide | Required | ||
| Declaration of Conformity | Required |
LED Indicators
The LED indicators give you instant feedback on the status of the converter
DIP switch
The DIP-switch is used to configure operation mode for LLF (Link Lost Forwarding) and operation mode for UTP/Fiber port. The default value of DIP switch is OFF.
| No. | Status | Function Description |
|---|---|---|
| DIP switch 1 | ON | Enable LFP (Link Fault Pass-through) |
| OFF | Disable LFP (link Fault Pass-through) | |
| DIP switch 2 | ON | Normal |
| OFF | Cut-Through : It has the characteristics of low transmission delay, |
but because it does not receive a complete frame, it is impossible to perform error detection. which will slightly occupy the overall network bandwidth.
Installation Guidelines
The installation environment for the media converter must meet the following requirements
- The media converter must avoid direct sunlight, away from heat and sources of strong electromagnetic interference.
- The media converter must be placed in a cool, dry place, and there should be enough gap for heat dissipa1ion all around for the purpose of ven1ilation and heat dissipation.
- The media converter must work in the indoor environment with a temperature of O”C-50″C and humidity of 10%-90% without condensation.
Explanation of symbols
The symbol with the exclamation mark in the triangle is used to indicate
important information in these operating instructions. Always read this
information carefully.
Disposal
WEEE: Dispose the product at a recycling point. Do not dispose together
with household waste. Incorrect storage/disposal can harm the environment
and/or cause injury.
Safety instructions
Read the operating Instructions carefully and especially observe the safety
Information. If you do not follow the safety Instructions and Information on
proper handling In this manual, we assume no llablllty for any resulting
personal Injury or damage to property. Such cases will invalidate the
warranty/ guarantee.
General information
- The device Ts not a toy. Keep it out of the reach of children and pets.
- Do not leave the packaging material lying around carelessly. This may become dangerous playlngmaterialfor chlldren.
- Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, flammable gases, steam, and solvents.
- Do not place the product under any mechanical stress.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. Safe operation can no longer be guaranteed if the product
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- hasbeen subjected to any serious transport-related stress.
- Please handle the product carefully. Jolts, impacts, or a fall, even from a low height, can cause damage to the product.
- Consult an expert when In doubt about the operation, safety, or connection of the appliance.
- Maintenance, modifications, and repairs must only be completed by a technician or an authorized repair center.
- lf you have questions that remain unanswered by these operating instructions, contact our technical support service or other technical personnel.
People and product
- Never use the product immediately after it has been brought from a cold room into a warm one. This can cause condensation to form, which may lead to irreparable damage. Allow the product to reach room temperature before connecting it and putting it to use. This may take several hours.
care and cleaning
- Disconnect the product from the mains before cleaning.
- Do not use any aggressive cleaning agents, rubbing alcohol, or other chemical solutions as they can cause damage to the housing and functioning of the product.
- Clean the product with a dry, fiber-free cloth.
Digital Data Communications GmbH
- Im Defdahl 10 F, 44141 Dortmund, Germany
- Email: support@level1.com