IKEA TREVLIG Induction Hob Instruction Manual
- June 4, 2024
- Ikea
Table of Contents
IKEA TREVLIG Induction Hob
Safety Information
Before using the appliance, read these safety instructions. Keep them nearby
for future reference.
These instructions and the appliance itself provide important safety warnings,
to be observed at all times. The manufacturer declines any liability for
failure to observe these safety instructions, for inappropriate use of the
appliance or incorrect setting of controls.
WARNING!: The appliance and its accessible parts become hot during use.
Care shoul be taken to avoid touching heating elements. Children less than 8
years of age must be kept away unless continuously supervised.
WARNING!: If the hob surface is cracked, do not use the appliance – risk
of electric shock.
WARNING!: Danger of fire: do not store items on the cooking surfaces.
CAUTION: The cooking process has to be supervised. A short cooking
process has to be supervised continuously.
WARNING!: Unattended cooking on a hob with fat or oil can be dangerous –
risk of fire. NEVER try to extinguish a fire with water: instead, switch off
the appliance and then cover flame e.g. with a lid or a fire blanket.
Do not use the hob as a work surface or support.
Keep clothes or other flammable materials away from the appliance, unitl all
the components have cooled down completely – risk of fire.
Metallic objects such as knives, forks, spoons and lids should not be placed
on the hob surface since they can get hot.
Very young children (0-3 years) should be kept away from the appliance. Young
children (3-8 years) should be kept away from the appliance unless
continuously supervised. Children from 8 years old and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge can use this appliance only if they are supervised or have been
given instructions on safe use and understand the hazards involved. Children
must not play with the appliance. Cleaning and user maintenance must not be
carried out by children without supervision.
After use, switch off the hob element by its control and do not rely on the
pan detector.
PERMITTED USE
CAUTION: The appliance is not intended to be operated by means of an
external switching device, such as a timer, or separate remote controlled
system.
This appliance is intended to be used in household and similar applications
such as: staff kitchen areas in shops, offices and other working environments;
farm houses; by clients in hotels, motels, bed & breakfast and other
residential environments.
No other use is permitted (e.g. heating rooms).
This appliance is not for professional use. Do not use the appliance outdoors.
INSTALLATION
The appliance must be handled and installed by two or more persons – risk of
injury. Use protective gloves to unpack and install – risk of cuts.
Installation, including water supply (if any), electrical connections and
repairs must be carried out by a qualified technician. Do not repair or
replace any part of the appliance unless specifically stated in the user
manual. Keep children away from the installation site. After unpacking the
appliance, make sure that it has not been damaged during transport. In the
event of problems, contact the dealer or your nearest Aftersales Service. Once
installed, packaging waste (plastic, styrofoam parts etc.) must be stored out
of reach of children – risk of suffocation. The appliance must be disconnected
from the power supply before any installation operation – risk of electric
shock.
During installation, make sure the appliance does not damage the power cable –
risk of fire or electric shock.
Only activate the appliance when the installation has been completed.
Carry out all cabinet cutting works before fitting the appliance in the place
and remove all wood chips and sawdust.
If the appliance is not installed above an oven, a separator panel (not
included) must be installed in the compartment under the appliance.
ELECTRICAL WARNINGS
It must be possible to disconnect the appliance from the power supply by
unplugging it if plug is accessible, or by
a multi-pole switch installed upstream of the socket in accordance with the
wiring rules and the appliance must be earthed in conformity with national
electrical safety standards.
Do not use extension leads, multiple sockets or adapters. The electrical
components must not be accessible to the user after installation. Do not use
the appliance when you are wet or barefoot. Do not operate this appliance if
it has
a damaged power cable or plug, if it is not working properly, or if it has
been damaged or dropped.
If the supply cord is damaged, it must be replaced with an identical one by
the manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard – risk of electric shock.
NOTE: People with a pacemaker or similar medical device should use care
when standing near this induction hob while
it is on. The electromagnetic field may affect the pacemaker or similar
device. Consult your doctor, or the manufacturer of the pacemaker or similar
medical device for additional information about its effects with
electromagnetic fields of the induction hob.
Installation
Installation process must follow the laws, ordinances, directives and standards (electrical safety rules and regulations, proper recycling in accordance with the regulations, etc.) in force in the country of use!
- For further information on the installation refer to the Assembly Instruction.
- Do not use silicon sealant between the appliance and the worktop.
- Make sure that the space underneath the hob is sufficient for air circulation. Please refer to the Assembly Instruction.
- The bottom of the appliance can get hot. If the appliance is installed above the drawers, make sure to install a non-combustible separation panel under the appliance to prevent access to the bottom. Please refer to the Assembly Instruction.
Product Description
- A Control panel
- B Cooking zones: 1, 2, 3, 4
Control panel
- Cooking level selected
- Cooking zone off
- Cooking power control
- Booster
- On/Off
- Timer control
- Cooking time indicator
- OK/Key lock button
- Pause
- Zone active Led
- Timer Led
- Timer symbol
Indicators
Pot incorrectly positioned or missing
This symbol appears if the pot is not suitable for induction cooking, is not
positioned correctly or is not of an appropriate size for the cooking zone
selected. If no pot is detected within 30 seconds of making the selection, the
cooking zone switches off.
Residual heat
If the display shows “H“, the cooking zone is still hot. When the cooking zone
cools down, the display goes off.
Cookware guidance
What pots to use
Only use pots and pans with bottom made from ferromagnetic material which are
suitable for use with inductions hobs:
- cast iron
- enamelled steel
- carbon steel
- stainless steel (although not all)
- aluminium with ferromagnetic coating or ferromagnetic plate
To determine if a pot or pan is suitable, check for the symbol (usually
stamped on the bottom). You can also hold a magnet to the bottom. If it clings
to the underside, the cookware will work on an induction hob.
To ensure optimum efficiency, always use pots and pans with a flat bottom that
distributes the heat evenly. If the bottom is uneven, this will affect power
and heat conduction.
How to use
Minimum diameter of pot/pan base for the different cooking areas
To ensure that the hob functions properly, the pot must cover one or more of
the reference points indicated on the surface of the hob, and must be of a
suitable minimum diameter.
Always use the cooking zone that best corresponds to the diameter of the
bottom of the pan.
Using a pot or pan with a smaller diameter than the adapter disc may cause
heat to build up that is not transmitted to the pot or pan and this could
blacken both the hob and the disc.
Empty or thin-based pots/pans
Do not use empty or thin-based pots/pans on the hob as it will not be able to
monitor the temperature or turn off automatically if the temperature is too
high, damaging the pan or the hob surface. If this occurs, do not touch
anything and wait for all components to cool down.
If an error message appears, refer to “Troubleshooting”.
Hint/tips
Noise during cooking
When a cooking zone is active, it may hum briefly. This is a characteristic of
all ceramic glass cooking zones and does not impair the function or life of
the appliance. The noise depends on the cookware used. If it causes
considerable disturbance, it may help to change the cookware.
First Use
POWER LIMITATION
At the time of purchase, the hob is set to the maximum possible power. Adjust
the setting in relation to the limits of the electrical system in your home as
described in the following paragraph.
NOTE: in case of activation of the max power level of 2.5 kW, some
features with more power demand will be not available.
To set the power of the hob:
Once you have connected the device to the mains power supply, you can set the
power level within 60 seconds.
Press the timer “+“ button for at least 5 seconds. The display shows PL
Press the button until the last power level selected appears.
Use the “+“ and “-“ buttons to select the desired maximum power consumption of
the hob. The levels available are: 2.5 kW – 4.0 kW – 6.0 kW – 7.2 kW. Confirm
by pressing .
The power level selected will stay in the memory even if the power supply is
interrupted.
To change the power level, disconnect the appliance from the mains for at
least 60 seconds, then plug it back in and repeat the steps above.
If an error occurs during the setting sequence, the EE symbol will appear, and
you will hear a beep. If this happens, repeat the operation. If the error
persists, contact the After-Sales Service. ACOUSTIC SIGNAL ON / OFF
To switch the acoustic signal on/off:
- Connect the hob to the power supply;
- Wait for the switch-on sequence;
- Press the “Boost“ button of the first keypad at the top left for 5 seconds.
Any alarms set will remain active.
Daily use
SWITCHING THE HOB ON/OFF
To turn the hob on, press the power button for around 1 second. To turn the
hob off, press the same button again, and all cooking zones will be
deactivated.
POSITIONING
CAUTION: Never cover the control panel with cookware or any other objects
otherwise the product could enter in protection mode. To restore the working
condition of the product, remove the cookware and wait at least 10 seconds
before using the product.
In the cooking zones close to the control panel, pots and pans must be kept
inside the markings and centered within the cooking zones. When grilling or
frying, is it recommended to use the rear cooking zones.
ACTIVATING/DEACTIVATING COOKING ZONES AND ADJUSTING POWER LEVELS
To activate the cooking zones:
Press the + or – button of the required cooking zone to activate it and adjust
the power. The level will be shown in line with the area, along with the
indicator light identifying the active cooking zone. The “BOOST“ button can be
used to select the quick heating function.
To deactivate the cooking zones:
Press the “0” button to the left of the power adjustment.
CONTROL PANEL LOCK
To lock the settings and prevent it being switched on accidentally, press and
hold the OK/Key lock button for 3 seconds. A beep and a warning light above
the symbol indicate that this function has been activated. The control panel
is locked, with the exception of the On/Off button. To unlock the controls,
repeat the activation procedure.
TIMER
There is one timer witch controls each cooking zones button.
To activate the timer:
Select the cooking zone, press the “+“ or “-“ button to set the desired time.
An indicator light will be activated in line with the specific symbol . Once
the set time has elapsed, a beep will sound, and the cooking zone will switch
off automatically.
The time can be changed at any point, and several timers can be activated
simultaneously.
In case the timer is activated “Zone selection indicator“ flashes and the
relative cooking time selected is displayed on the central display.
To deactivate the timer:
Press the “+“ and “-“ buttons together until the timer is deactivated.
Timer not available with autofunctions.
TIMER INDICATOR
The LED of “timer active indicator” indicates that the timer has been set for
the cooking zone.
PAUSE FUNCTION
This function allows to temporarily hold and then resume cooking processes
maintaining previous settings. The function also freezes all active timers.
To activate this function press II key.
The symbol II flashes on the display in place of the power levels.
To resume cooking, press II key and touch the slider of an active zone again.
Cooking tables
Cleaning and maintenance
WARNING!:
- Do not use steam cleaning equipment.
- Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator (“H“) is not displayed.
Important:
- Do not use abrasive sponges or scouring pads as they may damage the glass.
- After each use, clean the hob (when it is cool) to remove any deposits and stains from food residue.
- A surface that is not kept suitably clean may reduce the sensitivity of control panel buttons.
- Use a scraper only if residues are stuck to the hob. Follow the scraper manufacturer’s instructions to avoid scratching the glass.
- Sugar or foods with a high sugar content can damage the hob and must be immediately removed.
- Salt, sugar and sand could scratch the glass surface.
- Use a soft cloth, absorbent kitchen paper or a special hob cleaner (follow the Manufacturer’s instructions).
- Spills of liquid in the cooking zones can cause the pots to move or vibrate.
- After cleaning the hob, dry thoroughly.
Troubleshooting
- Check that the electricity supply has not been shut off.
- If you are unable to turn the hob off after using it, disconnect it from the power supply.
- If alphanumeric codes appear on the display when the hob is switched on, consult the following table for instructions.
Please note: The presence of water, liquid spilled from pots or any objects resting on any of the hob buttons can accidentally activate or deactivate the control panel lock function.
Sounds produced during operation
Induction hobs may whistle or creak during normal operation.
These noises actually come from the cookware and are linked to the
characteristics of the pan bottoms (for example, when the bottoms are made
from different layers of material or are irregular).
These noises may vary according to the type of cookware used and to the amount
of food it contains and are not the symptom of something wrong.
Before calling the after-sales service:
- If there is a fault try to resolve the problem by following troubleshooting guidelines.
- Switch the appliance off and back on again to see if the fault persists.
If after the above checks the fault still occurs, get in touch with the
nearest after-sales service.
You can find a full list of IKEA appointed contacts at the end of this user
manual.
When contacting our Client After sales service, always specify:
- a brief description of the fault;
- the type and exact model of the appliance;
- the service number (number after the word Service on the rating plate). The service number is also indicated on the guarantee booklet;
- your full address;
- your telephone number.
If any repairs are required, please contact an authorized after-sales service (to guarantee that original spare parts will be used and repairs carried out correctly).
Technical data
This appliance meets the Eco design requirements of European Regulation n.66/2014, in conformity to the European Standard EN 60350-2
The technical information are situated in the rating plate on the bottom side of the appliance.
Electrical connection
Electrical connection must be made before connecting the appliance to the
electricity supply.
Installation must be carried out by qualified personnel who know the current
safety and installation regulations. Specifically, installation must be
carried out in compliance with the regulations of the local electricity supply
company.
Make sure the voltage specified on the data plate located on the bottom of the
appliance is the same as that of the home.
Regulations require that the appliance be earthed: use conductors (including
the earth conductor) of the appropriate size only. The product is supplied
with the mains cable H05V2V2-F which conforms to Standard IEC/EN 60335-2-6.
Environmental concerns
WARNING! Ensure that the appliance is switched off and disconnected from the power supply before performing any maintenance operation; never use steam cleaning equipment – risk of electric shock. Do not use abrasive or corrosive products, chlorine-based cleaners or pan scourers.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and is marked with the recycle
symbol .The various parts of the packaging must therefore be disposed of
responsibility and in full compliance with local authority regulations
governing waste disposal.
DISPOSAL OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recyclable or reusable materials. Dispose
of it in accordance with local waste disposal regulations. For further
information on the treatment, recovery and recycling of household electrical
appliances, contact your local authority, the collection service for household
waste or the store where you purchased the appliance. This appliance is marked
in compliance with European Directive 2012/19/EU,
Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is
disposed of correctly, you will helpP prevent negative consequences for the
environment and human health.
The symbol documentation indicates that it should not be treated as on the
product or on the accompanying domestic waste but must be taken to an
appropriate collection center for the recycling of electrical and electronic
equipment.
The symbol on the product or on the accompanying documentation indicates that it should not be treated ass domestic waste but must be taken to an appropriate collection center for the recycling of electrical and electronic equipment.
ENERGY SAVING TIPSs
Make the most of your hot plate’s residual heat by switching it off a few
minutes before you finish cooking.
The base of your pot or pan should cover the hot plate completely; a container
that is smaller than the hot plate will cause energy to be wasted.
Cover your pots and pans with tight-fitting lids while cooking and use as
little water as possible. Cooking with the lid off will greatly increase
energy consumption.
Use only flat-bottomed pots and pans.
DECLARATION OF CONFORMITY
This appliance meets the Eco Design requirements of European Regulations n.
66/2014 in conformity to the European standard EN 60350-2.
IKEA GUARANTEE
How long is the IKEA guarantee valid?
This guarantee is valid for five years from the original date of purchase of
your appliance at IKEA Pty Ltd,ABN 84 006 270 757 or at Cebas Pty Ltd, ABN 15
009 156 003. The original sales receipt, is required as proof of purchase. If
service work is carried out under guarantee, this will not extend the
guarantee period for the appliance.
Who will execute the service?
IKEA Authorized Service Centre will provide the service through its own
service operations or Authorized Service Centre network. Contact IKEA for
further information.
- If you encounter any trouble with theappliance and wish to register a servicecall or make a claim, please refer toww.ikea. com.au for your local store aftersales customer service center phonenumber, online email and opening timesor refer to the phone numbers shownbelow.
The principal address and contact details in Australia are:
IKEA Authorized Service Centre at www.IKEA.com.au or
-
For Queensland, New South Wales andVictorian customers please contact:
IKEA Pty Ltd
IKEA Service OfficeL1 Clock Tower, 630 Princes HighwayTempe, NSW 2044
Victoria: (03) 8523 2154
New South Wales: ( 02) 8020 6641
Queensland: (07) 3380 6800
IKEA Perth: (08) 9201 4532
IKEA Adelaide: (08) 8154 4532 -
For Western Australian and SouthAustralian cutomers please contact:
Cebas Pty Ltd
8c Sunray Drive,
Innaloo WA 6018 Australian
IKEA Perth: (08) 9201 4532
IKEA Adelaide: ( 08)8154 4532
What does this guarantee cover?
The guarantee covers applicable faults of the appliance, which have been
caused by faulty construction or material faults from the date of purchase
from IKEA. This guarantee applies to domestic use only. The products have been
designed and tested for domestic purposes only and this guarantee does not
cover damage arising from use of the Product in a commercial environment. The
exceptions are specified under the headline“What is not covered under this
guarantee?” Within the guarantee period, the costs to remedy the fault e.g.
repairs, parts, labour and travel will be covered, provided that the appliance
is accessible for repair without special expenditure. Replaced parts become
the property of IKEA.
The guarantee exists only if the appliance complies and is installed in
accordance with:
- The technical specifications.
- The Assembly Instructions and usermanual Safety Information. IKEA’s guarantee is subject to Australian Consumer Law – see Schedule 2 to Competition and Consumer Act, 2010. This guarantee is in addition to (and does not exclude, restrict or modify in any way) any non-excludable statutory warranties in Australia.
What will IKEA do to correct the problem?
IKEA appointed service provider will examine the product and decide, at its
sole discretion, if it is covered under this guarantee. If considered covered,
IKEA service provider or its authorized service partner through its own
service operations, will then, at its sole discretion, either repair the
defective product or replace it with the same or a comparable product.
What is not covered under this guarantee?
- What is not covered under this guarantee?
- Normal wear and tear.
- Deliberate or negligent damage,damage caused by failure to observeoperating and maintenance instructions,incorrect installation or by connectionto the wrong voltage, damage causedby chemical or electrochemical reaction,rust, abrasion or scratching, corrosion orwater damage including but not limitedto damage caused by excessive lime inthe water supply, damage caused byabnormal environmental conditions.
- Damage caused from the use of theappliance in a manner other thanthe use for which it was specificallydesigned.
- Damage caused by power outages,electrical power surge or impropersupply voltage via connection to SupplyAuthority mains or alternative supplysystems.
- Consumable parts including batteries and lamps, removable wire, glass and plastic trays and other accessories.
- Internal or external damage as a result of excessive use of cleaning products or cleaning agents.
- Non-functional and decorative parts which do not affect normal use of the appliance, including any scratches andpossible color differences.
- Accidental damage or blockages caused by foreign objects, eg. coins, underwires,nails, buttons or jewelry, or substances and cleaning or unblocking of filters,drainage systems or soap drawers
- Damage caused by vermin, insects orpets.
- Note – internal or external abinettran sports damage must be reported within 7 days of purchase date.
- Damage to the following parts: ceramic glass, accessories, crockery and cutlery baskets, feed and drainage pipes, seals, lamps and lamp covers, screens, knobs,casings and parts of casings. Unless such damage can be proved to have been caused by production faults.
- Cases where no fault could be found during a technician’s visit.
- Any consequential loss due to appliance failure.
- Repairs not carried out by our appointed service providers and/or an authorized service contractual partner or where nonoriginal parts have been used.
- Repairs to parts or systems caused by unauthorized modifications made to appliance.
- Repairs caused by installation which is faulty or not according to specification.
- Problems caused by incorrect or inadequate venting of the appliance.
- The use of the appliance in a nondomestic environment i.e. professional use.
- Transportation damages. If a customer transports the product to his home or another address, IKEA is not liable forany damage that may occur during transport. However, if IKEA delivers the productto the customer’s delivery address, then damage to the product that occurs during this delivery will be covered by IKEA.
- • Cost for carrying out the initial installation of the IKEA appliance.However, if an IKEA-appointed authorized Service Centre or its authorized service partner repairs or replaces the appliance under the terms of this guarantee, the Authorized Service Centre or its authorized service partner will reinstall the repaired appliance or install the replacement, if necessary.
• The benefits conferred by this express warranty are in addition to all other conditions, warranties, guarantees, rights and remedies expressed or implied by the Trade Practices Act and similar state and Territory laws and all other obligations and liabilities on the partof the manufacturer or supplier and nothing contained herein shall restrict or modify such rights, remedies, obligations or liabilities.
How country law applies?
Our goods come with a guarantee that Our goods come with guarantees that
cannot be excluded under the Australian Consumer Law (ACL).
You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major
failure.
This guarantee is not intended in any way to limit or exclude such rights and
remedies that you may have under law.
You can find out more information about the Australian Consumer Law on the
ACCC website: www.accc.gov.au
Area of validity
The IKEA guarantee applies only to products purchased and installed in
AUSTRALIA .
What you must do to make a claim under the guarantee
To make a claim under the guarantee contact IKEA Authorized Service Centre at
the above address, the IKEA catalogue or refer to www.ikea.com.au for your
local store customer service phone number, online email and opening times.
Please describe the problem that you are facing with the appliance in detail
along with your product article number (8 digit code) and date of purchase at
the time of call registration.
Please do not hesitate to contact the dedicated Authorized Service Centre for
IKEA appliances to:
- Make a service request under this guarantee.
- Ask for clarification on the installation of the IKEA appliance in the dedicated IKEA kitchen furniture.
- Ask for clarification on user manual contents and specifications of the IKEA appliance.
To ensure that we provide you with the best assistance, please read carefully the Assembly Instructions and/or the User Manual section of this booklet before contacting us.
How to reach if you need our service
The IKEA Authorized Service Centre will assist you on the phone with basic
troubleshooting for your appliance at the time of warranty call registration.
Please refer to the IKEA catalogue or
www.ikea.com.au or to below phone numbers and select
your local stor .
Victoria: (03) 8523 2154
New South Wales: (02) 8020 6641
Queensland: (07) 3380 6800 IKEA
Perth: (08) 9201 4532
IKEA Adelaide: (08) 8154 4532u
Please describe the problem that you are facing with
the appliance in detail along with your product model number, serial number,
date of purchase at the time of call registration.
Please also always refer to the IKEA article number (8 digit code) and 12
digit service number placed on the rating plate of your appliance.
SAVE THE SALES RECEIPT!
Kindly keep all these details and original invoice of purchase handy during
the service technician’s visit to enable him to carry out the job. It is your
proof of purchase and required for the guarantee to apply.