REEF FACTORY Contents Test Kit User Guide

REEF FACTORY Contents Test Kit

Content of the test list

PO4 Reagent 1: Danger. Causes severe skin burns and eye damage. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Contains:sulfuric acid.
P04 Reagent 2: Warning. May cause respiratory irritation. Avoid breathing vapours/ spray. Contains tin chloride (II). May produce an allergic reaction.

INTRODUCTION

• Smart test kit is a series of drop tests developed by Reef Factory LAB. Smart Reef’s state-of-the-art software and our chemistry experts have taken classic drip tests to a new level. Full interactive instructions provide a hassle- free way to perform the test, guiding you through each step of the way. This makes test execution simple and results repeatable and accurate.
• Integration with Smart Reef 360 parameter panel allows recording full history of measurements. Based on the results the Smart Reef system will make supplementation recommendations for you to ensure that you maintain best environment for your corals.

USING INSTRUCTION

1. Taking a seawater sample
   Take 10 ml of water from the aquarium with a syringe and pour it into the vial.

2. Adding P04 Reagent 1

   • Add 2 drops from the PO4 Reagent 1 pipette to the vial.
   • Carefully stir the vial with circular motions.

3. Adding P04 Reagent 2

4. Shake PO4 Reagent 2, then add 2 drops to the vial.

5. Close the vial with the attached cap and shake.

6. Chemical reaction
   Wait 30 seconds until the reaction takes place. After this time, the sample with the reagent should turn blue.

7. Getting ready for test result reading
   Remove the cap and place the vial on the starting field of the chart of results.

8. Reading and recording the result
   Looking from the top, compare the color intensity with the color on the template, read the result and/or enter it into the user panel in Smart Reef.

Store in a cool, dry, well-ventilated place in a tightly closed original packaging. In the temperature range of 5°C to 25°C. Avoid direct sunlight and heat sources. Keep the product away from children. PO4 Smart test kit should be used up to 3 months of opening.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>