OTL Harry Potter TWS Wireless in Ear headphone User Guide

OTL Harry Potter TWS Wireless in Ear headphone

Product Information: OTL TWS Earpods

Product Overview

• Microphone (FR, DE, NL, IT, ES)
• Charging port (FR, DE, NL, IT, ES)

Safety Instructions
To extend the lifespan of the headphones and prevent hearing damage:

• Avoid listening at high volume for extended periods of time.
• Evita ascoltare a un volume molto elevato per periodi prolungati di tempo (IT).
• Evite escuchar a un volumen muy alto durante mucho tiempo (ES).

First-Time Use/Pair to New Device

1. Take both ear pods out from the charging case.
2. The LED indicator light will flash on one of the earpads to detect Bluetooth-enabled devices near you and enter the pairing mode.
3. On your Bluetooth-enabled device, turn on the Bluetooth function in the settings.
4. OTL TWS Earpods will appear on the Bluetooth device list. Select OTL TWS Earpods to establish pairing.
5. When pairing is successful, the LED on both earpads will flash BLUE.

Use with Your Other Devices
When you want to play audio from another Bluetooth device:

1. Disconnect the ear pods from the original device.
2. Follow steps 1-4 in the “First Time Use/Pair to New Device” section to re-pair the ear pods with a new Bluetooth-enabled device.

Power On
Take both ear pods out from the charging case, and both ear pods will automatically power on (make sure the charging case is charged).

Power Off
Put both ear pods back into the charging case, and they will automatically power off.

SAFETY INSTRUCTIONS

• Read all the instructions carefully before using the product and keep them for future reference.
• Do not immerse in water.
• Unsuitable for use by children under the age of 3 due to small parts which may cause choking.
• We recommend that children aged 3-7 are supervised by an adult whilst using the product, prolonged use is not advised.
• The device may become warm while charging.
• Set the volume to low before turning on the sound.
• Long-term exposure to loud noise may cause damage to eardrums or loss of hearing.

PRODUCT OVERVIEW

FIRST-TIME USE/PAIR TO NEW DEVICE

Take both ear pods out from the charging case, then put them back in the charging case to activate the ear pods.
Note: Please charge your ear pods before first-time use.

PAIR WITH BLUETOOTH DEVICES

1. Turn the Bluetooth function on in the settings of your Bluetooth-enabled device.
2. Take both ear pods out from the charging case.
3. The LED indicator light will flash on one of the ear pods to detect Bluetooth-enabled devices near you and will enter pairing mode.
4. “OTL TWS EARPODS” will appear on the Bluetooth device list, select “OTL TWS EARPODS” to establish pairing.
5. When pairing is successful, the LED on both earpods will flash BLUE.

POWER ON
Take both ear pods out from the charging case and both ear pods will be automatically powered on (make sure the charging case is charged).

POWER OFF
Put both ear pods back into the charging case, it will automatically power of

CHARGING THE EARPADS
Insert the ear pods into the charging case, the LED light will be solid RED when charging. once fully charged, the LED light will be turned off.

CHARGING THE CASE
Please charge your charging case before first use. Ensure to charge via the provided type C cable. The LED indicator light will be flashing during charging and will turn on solid once it is fully charged. When the battery is low, only the left LED indicator light will flash

CHANGING EAR TIPS
To remove an ear tip, pull firmly with your fingers at the base of the ear tip. To attach an ear tip, with your fingers at the base of the ear tip, push the ear tip onto the connector until it clicks into place. For more tip sizes, see the inside box.

PLAY / PAUSE
When listening to music, touch your right/left ear pod twice to play/pause

SKIP TRACK FORWARD/BACKWARD
Whilst listening to music, press the right earpad for 2 seconds to forward to the next track, or press the left earpad for 2 seconds to go backward to the previous track

VOICE ASSISTANT
Touch the right/left earpad three times to activate the voice assistant (i.e. Siri or Google Assistant)

ANSWER CALL/HANG UP CALL
Touch the right/left earpad twice to answer the incoming call and touch twice again to hang up

REJECT CALL
Press the MF button on the right/left earpad for 2 seconds to reject the incoming call

TROUBLESHOOT

If an error occurs with the ear pods, please follow the steps below:

• Take one of the ear pods out of the charging case
• The LED light will flash with BLUE and RED quickly, press the MF area for 6 seconds. The RED LED light will go off after 1 second.
• Put the ear pod back into the charging case
• Take the other ear pod out from the case and follow steps 1-3.
• Take both ear pods out from the charging case, and search for “OTL TWS EARPODS” from the Bluetooth device while one of the ear pods will flash RED and BLUE alternatively.
• When the ea rods power is low, the Bluetooth range may be affected. Please charge the ear pods to avoid disruption during use.
• Please see our website www.otltechnologies.com for general troubleshooting method instructions.

WARNING

• This product is not a toy.
• Do not disassemble, repair, or modify the headphones.
• Keep the headphones dry and do not store the headphones in damp areas to avoid damage to the headphones.
• Avoid dropping the headphones as it may cause damage to the product.
• Do not insert a jack plug into electric sockets.

INFORMATION ON DISPOSAL FOR USERS OF WASTE ELECTRICAL & ELECTRONIC
EQUIPMENT (PRIVATE HOUSEHOLD)
This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery, and
recycling, please take these products to designated collection points, where they will be accepted on a free-of-charge basis. Alternatively, in some countries, you may be able to return your products to your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the environment that could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. www.otltechnologies.com | info@otltechnologies.com

Made in PRC
Oceania Trading Ltd/OTL Technologies
2 Dinsmore Road, London SW12 9PS, UK
Hullenbergweg 278-308, 1101 BV Amsterdam, Zuid-oost, NL

References

• OTL Technologies

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>