VANKYO Mini Movie Upgraded Projector User Manual

VANKYO Mini Movie Upgraded Projector

Notice

1. Please read this manual thoroughly before using the projector.
2. Please use the correct power cord for the country where you are located.
3. Do not look into the lens when the projector is on to prevent the bright light from hurting your eyes.
4. Do not place the projector on an unstable stand, or table.
5. Do not use the projector where it may be exposed to rain, water, or excessive humidity.
6. If you have not used the projector for a long time, make sure its power is turned off and the plug is disconnected from the outlet.
7. When shipping the projector, place it in its original packing materials or use equivalent materials with cushioning around the projector.
8.  If the projector is mounted on a ceiling or wall, it should be installed by the safe mounting hardware.
9. If the projector is damaged, do not attempt to service this product yourself and contact the Vankyo Support Team.

Introduction to your projector

Thank you for choosing the VANKYO Mini Movie Upgraded Projector, an exceptional addition to your entertainment arsenal. Your purchase is not just a transaction; it’s an investment in an immersive, cinematic experience that will elevate your moments of leisure and entertainment.

At VANKYO, we understand the importance of exceptional visual experiences, and our Mini Movie Upgraded Projector embodies our commitment to delivering quality, innovation, and convenience. Whether you’re planning cozy movie nights with loved ones, indulging in gaming adventures, or impressing your colleagues with stellar presentations, this projector is your gateway to a world of vivid imagery and captivating content.

In this introduction, we express our heartfelt appreciation for your trust in VANKYO, and we’re thrilled to introduce you to the countless possibilities that await you with your new Mini Movie Upgraded Projector. Get ready to unlock a world of cinematic wonder, and let the journey of immersive entertainment begin.

Product Packing List

Please keep all the packaging material in case a shipment is needed in the future. Make sure you receive all the parts below.

Using the Basic Projector

You can use the projector’s Menu system to adjust the settings to control how your projector works by pressing the Menu button.

TV Settings

1. Insert the coaxial cable into the TV port on the projector;
2. Press the Left/Right buttons and the OK/Enter button to enter the TV settings;
3. Auto Tuning: The projector will search the TV channels automatically.
4. ATV Manual Tuning: You can also manually adjust the channels by the Upward/Downward buttons.
5. Press the Up and Down button to select the option you would like to change, then press the OK/Enter button to enter the submenu to set up.
6. When you finish changing settings on a menu, press the Menu button on the projector or the Exit button on the remote to exit.

Picture Settings

1. Press the Right button and the OK/Enter button to enter the PICTURE settings;
2. Picture Mode: switches among the image modes of Standard, Soft, User, and Vivid for different projected contents. You can set up the Contrast, Brightness, Color, Sharpness and
3. Tint for the image after you select the User mode;
4. Color Temperature: switches among the color temperature modes of Medium, Warm, User, and Cool for different color preferences of the image. You can set up color proportions of Red, Green, and Blue for the image after you select User mode;
5. Aspect Ratio: sets up the aspect ratio of the image. It has 4:3, 16:9 and Auto;
6. Noise Reduction: sets up the intensity of noise reduction when the projected contents have sound. It includes Off, Low, Middle, High and Default;
7. Screen: When you connect the projector to the computer by VGA, this function will be activated. After selecting VGA as the input source and choosing Duplicate display mode, it will show the following interface on the desktop, you can adjust the desktop accordingly. After setting up, you can press the Menu/Exit button to back to this Screen option under PICTURE.
8. Projection Direction: You can set the projection modes Front, Rear On Desk, Front On Ceiling, and Rear On Ceiling.
9. Press the Up and Down button to select the option you would like to change, then press the OK/Enter button to enter the submenu to set up.
10. When you finish changing settings on a menu, press the Menu button on the projector or the Exit button on the remote to exit.

Sound Settings

1. Press the Right button and the OK/Enter button to enter the SOUND Settings:
   • Sound Mode: to set up sound patterns of Standard, MUSIC, MOVIE, Sports, and User for different projected contents;
   • Balance: to balance the sound of the left and right channels of the speaker;
   • Auto Volume: to intelligently adjust the volume;
   • Surround Sound: You can choose different sound modes from Off, SRS TruSurround XT, and Surround options.
   • Sleep Timer: can shut off the projector after a set amount of time.
2. Press the Up and Down button to select the option you would like to change, then press the OK/Enter button to enter the submenu to set up.
3. When you finish changing settings on a menu, press the Menu button on the projector or the Exit button on the remote to exit.

Sleep Timer Settings

1. Press the Right button and the OK/Enter button to enter the TIME Settings:
   • Sleep Timer: can shut off the projector after a set amount of time.
   • Press the Up and Down button to select the option you would like to change, then press the OK/Enter button to enter the submenu to set up.
   • When you finish changing settings on a menu, press the Menu button on the projector or the Exit button on the remote to exit.

Option Settings

1. Press the Right button and the OK/Enter to enter the Option Settings;
   • OSD Language: to set up the language displayed in the operation interface.
   • Restore Factory Default: to reset the projector;
   • Blending: To adjust the background transparency of the Menu interface. You can choose from Low, Middle, High and Off;
   • OSD Duration: To adjust the duration of keeping the Menu interface. You can choose from 5 Sec, 10 Sec, 15 Sec and Off;
   • Software Update (USB): to update the projector’s software version.
2. Press the Up and Down button to select the option you would like to change, then press the OK/Enter button to enter the submenu to set up.
3. When you finish changing settings on a menu, press the Menu button on the projector or the Exit button on the remote to exit.

After Using Your Projector

Please turn off the projector after using it.

1. Press the Power button on the projector or the remote;
2. The projector displays a shutdown confirmation screen below:

Press Power again to power off, or press other buttons to cancel.

1. Turn off the projector with another press. (To leave it on, press any other button.)
2. Unplug the power cord of the projector;
3. Cover the lens and store the projector in a cool and dry place;

Features

Home entertainment that doesn’t break the bank

It has a design that is small and compact, a menu that is easy to use, simple settings, and is easy to carry. It also has a huge screen that is 200 inches in size, provides an outstanding visual and acoustic experience, and has high- resolution projection. It is suitable for viewing movies as well as sports, games, and parties.

Speaker Capable of Hi-Fi Quality

Built-in speaker with a degree of fidelity comparable to that of a Hi-Fi system, producing music that is both superb and powerful. Additionally, you have the option of connecting an extra speaker in order to improve the overall sound quality.

Innovative Dual-Fan System for Cooling

The bothersome airflow issue of overheating and noise has been overcome thanks to the most recent technological advancement of the dual-fan system, which is based on the modern noise reduction technology. You will have a more enjoyable experience thanks to the tiny projector’s cutting-edge cooling technology, which enables it to operate smoothly and silently.

Exceptional Time Spent at the Movies:

The VANKYOPROJECTOR home video projector has a brightness that is 60% higher than that of competing tiny projectors that cost the same. Support for resolutions up to 1080P, a contrast ratio of 2,000:1, and the ability to deliver an amazingly realistic picture for films and movies means that you can spend quality time with your loved ones or friends, whether you’re inside or outside. In the meanwhile, the technique of diffuse reflection may make the projected picture softer, so protecting your eyes from any potential strain.

Connect to a Number of Different Devices:

It is compatible with TV sticks, personal computers, laptops, tablets, Blue- ray DVD players, TF cards, USB flash drives, PlayStation 5, PlayStation 4, Xbox One, and Wii, as well as media players (music, images, video, and text). You may also link it to your iPhone, iPad, or Android smartphone (but the necessary adapters for doing so, such as a lightning to HDMI converter or a wireless HDMI dongle, are not included). Not recommended for use in corporate PowerPoint presentations.

Large Screen and Speakers for Stereo Sound:

It has a viewing size that ranges from 30 inches to 200 inches, with a distance that ranges from 2.62 feet to 14.8 feet. The projection distance should be between 3.9 and 8.2 feet for the best possible picture size, which is around 60 to 80 inches. The sound effects produced by the built-in speakers are quite remarkable. In addition to this, the 3.5mm audio output allows you to connect your home theater system for improved sound quality.

Design for Portability:

The CiBest compact projector weighs just 2.25 pounds and has dimensions of 7.87 by 5.5 by 2.7 inches, making it easy to carry it with you wherever you go. The projector is fitted with the most up-to-date cooling technology, which halves the amount of noise produced by the fan, making for a more peaceful setting in which to enjoy your movie time. 15° of manual keystone adjustment is available to accommodate your unique preferences.

When synchronizing the screen through Wi-Fi, practically all of the Wi-Fi projectors now available on the market are not compatible with streaming video services such as Netflix, Amazon Prime, or Disney+ Video because of the copyright restrictions imposed by video hosting websites such as Netflix and also Hulu. I hope you are able to comprehend, and I kindly ask that you play these films via the TV stick, Roku Stick, or Chromecast.

Troubleshooting

Problems listed below might occur during the operation of your projector. Please refer to the possible factors which might cause the issue to do troubleshooting.

1. Why Is the Display of the Projector Available but Without Audio?

   • The Projector or the connected device (PC, TV, etc.) is muted
   • Dolby sound is not supported, exit to play again
   • The audio format is not supported by the projector
   • VGA connection can only transmit analog signals of video, not audio. An external speaker is required when the device is connected via a VGA cable.
   • Encryption is applied to the videos or media player that holds the video. Try more videos to define this possibility.
   • Exclude the above possibilities, try another HDMI cable /external speaker, and a 2.0USB disk/ Micro SD card within 32G/USB hard disk within 1TB to play directly to check if the video and audio are both available.

2. Why Is the Audio of the Projector Available but Without Display?

   • The video format is not supported by the projector
   • Encryption is applied to the videos or media player that holds the video
   • If the lamp of the projector is off with only audio playing, the lamp is defective. Please contact Vankyo for a replacement
   • Try another HDMI cable if you select the HD input source

3. Why Does the Projection Screen Show No Signal?

   • Make sure all cables are plugged correctly and firmly
   • Make sure you select the right input source. For example, if you insert a USB drive, please select USB in the interface of the Input Source
   • USB 2.0 disk is supported on this projector. If a USB 3.0 is connected, it will only show No Signal.

4. What can I do if the Image is Blurry or Out of Shape?

   • Adjust the focus and keystone ring by moving it leftward/rightward till it shows the best images
   • Place the projector on a flat surface horizontally or vertically. An inclination of any angle may result in blurry displays or uneven colors
   • A darker environment suggested achieving the best-projected performance
   • The eligible distance of 1.16m-5m/32inch-170inch between the projector and projecting screen/wall
   • The projecting wall or screen should be clean white if possible.

5. How Can I Do if the Image is Upside Down?

   • Enter Menu-Picture-Projection Direction to flip the projection image accordingly.

6. How Can I Do if the Projection Screen is Not Square or Allied Horizontally

   • Make sure the projector is placed on a flat surface with the projector light in the middle of the screen.
   • Make sure the projector screen is placed horizontally.

7. How Can I Do if there is Color Distortion?

   • Make sure the video source has a fine resolution.
   • Adjust the colors: Enter Menu-Picture-Color Temperature, then select different modes and adjust the value accordingly.
   • Reset the projector to the manufacturer setting: enter Menu-Option-Restore Factory Default to reset.

8. How Can I Do if the Remote is Unresponsive?

   • Make sure the batteries are installed correctly and the power is enough.
   • The remote works with the projector through the IR receiver. The remote works only when the IR receiver is within the direct reaction distance and will be unresponsive if the IR receiver is blocked or covered.

9. What should I do if there are Small Dots on Display?

   • Tap the projector slightly to shake off the dust that may be caused during installation or shipping
   • Clean the lens with clean non-woven fabrics

10. How Should I Do if There is an Expanding Dark Spot or Smoke when Using the Projector?

    • Check if the fan noise increases or if the fan stops working. Unplug the projector and contact the Vankyo Team for assistance.
    • Make sure the outlet and projector power adapter are not wet or humid which will cause sparks or smoke on the outlet when powering on the projector.

11. Why Does the Projector Shut Off while playing?

    • Make sure the power plug is working and firmly fitted into the outlet.

    • If the LED indicator on the projector is lit up, but the fan doesn’t work, please contact the Vankyo Team for assistance.
      Overheat on the projector will activate the built-in power-off protection panel. Restart the projector when it gets cooler.

    • Overload of power when a USB disk of 1TB or above is connected without an external power supply will cause shutting off. Insert the disk when the projector is powered off or providing an external power supply for the disk would solve the issue.

12. Can this Projector Support 3D Effect?

    • The projector supports 3D video sources, and 3D viewing performance is achievable with Red-Blue 3D Glasses, but please understand the experience will not be better than in the theater and we do not recommend it if you have a higher expectation about 3D effects.

13. Why doesn’t Anything Work in the Main Interface Especially with External Storage Connected?

    • The correct input source must be selected when you use the USB disk or microSD card; otherwise, No Signal will be shown on the screen.

14. Why doesn’t the Projector’s Lamp Light Up or Power On?

    • Please contact Vankyo for assistance when this occurs.

15. How Can I Change the Language?

    • Press the Menu button to enter Option -OSD Language interface to select the language

16. How Can I Connect My Smart Phone to the Projector?

    • HDMI adapter is needed to deliver displays from smartphones. Adapters vary depending on smartphones.

17. What kind of Screws do I need for mounting this Projector?

    • British Standard Pipe Thread of 1/4 inch

18. What Kind of Cable do I Need when Connecting TV BOX, TV, Firestick, and DVD Player to the Projector?

    • HDMI cable for all devices mentioned above. For some TVs without HDMI ports, a VGA cable will work. Certain DVD players require an AV cable connection.

19. How Can I Display PowerPoint on the Projector?

    • To project the PowerPoint from a computer or other mobile devices, you can just connect the computer or the mobile device to the projector following the steps mentioned here;
    • To project from a USB disk, PowerPoint is not supported. However, we can save PowerPoint profiles as PNG, JPG, or other image formats that are supported by the projector, then select the photos that we plan to do loop play. The default interval of each photo is about 5 seconds and we can pause it by controlling through the button on the remote or the projector.

Warranty and Support

Service that is 100% Professional: A money-back guarantee for the first two months and a lifetime warranty are included. Should you have any inquiries, kindly get in touch with our customer service staff. We will put out our best effort to find solutions to the issues that you are facing. For any queries and info. please visit our official website at www.ivankyo.com.

FAQs

What is the VANKYO Mini Movie Upgraded Projector?

The VANKYO Mini Movie Upgraded Projector is a compact and versatile projector designed for home entertainment, offering a range of features for an immersive viewing experience.

What is the native resolution of this projector?

The native resolution of the VANKYO Mini Movie Upgraded Projector is typically 800 x 480 pixels (WVGA), suitable for basic video and presentation content.

What type of projection technology does it use?

This projector often utilizes LED (Light Emitting Diode) technology, known for its energy efficiency and long-lasting light source.

What is the brightness rating of the VANKYO Mini Movie Upgraded Projector?

The brightness rating can vary, but it's typically around 2000 to 2500 lumens, providing decent visibility in moderately lit rooms.

What is the contrast ratio of this projector?

The contrast ratio is usually moderate, often around 1000:1, which offers decent color contrast.

What is the lamp life of this projector?

The VANKYO Mini Movie Upgraded Projector uses an LED light source, which can last up to 40,000 hours or more, making it a long-lasting option with minimal maintenance.

Does it have built-in speakers?

Yes, this projector often includes built-in stereo speakers, providing audio for your content without the need for external speakers.

What input connections are available on the VANKYO Mini Movie Upgraded Projector?

The projector typically includes various input options, such as HDMI, VGA, USB, and audio ports, ensuring compatibility with different devices like gaming consoles, laptops, and streaming devices.

Is it suitable for streaming content from devices like smartphones and tablets?

Yes, you can often connect your smartphones, tablets, or other portable devices to the VANKYO Mini Movie Upgraded Projector for streaming content via HDMI or USB connections.

Does it support wireless projection?

Some versions of this projector may support wireless projection, allowing you to connect and display content wirelessly from compatible devices.

What is the projection size range of this projector?

The VANKYO Mini Movie Upgraded Projector can project screen sizes ranging from 32 inches to 170 inches diagonally, depending on the distance from the screen or wall, providing flexibility for various room sizes.

Is it suitable for outdoor use?

While it can be used outdoors, it's primarily designed for indoor use, where its brightness and image quality can be fully appreciated.

Video- VANKYO Upgraded Mini Projector

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>