GARDE XL 181MCJ2 Manual Commercial Citrus Juicer with Safety Spring User Guide

Table of Contents

GARDE-XL-181MCJ2-Manual-Commercial-Citrus-Juicer-with-Safety-Spring-
PRODUCT

Product Name:

181MCJ2 – Manual Citrus Juicer with Safety Spring

Product Description

The 181MCJ2 is a manual citrus juicer designed for commercial use. It features a safety spring mechanism to ensure safe operation.
The juicer is equipped with suction cups to securely hold it in place on a flat countertop.
It comes with a bowl, straining funnel, and a push block for efficient juicing.
The juicer is easy to clean and maintain.

Safety Instructions

Operation

Position the juicer on a flat, dry countertop.
Press down on the base to allow the suction cups to hold the juicer securely to the counter.
Lock the bowl and straining funnel in place by aligning the notches on the bottom of each with the base and twisting to lock.
Place a container underneath the funnel to collect the juice.
Halve the fruit and place it on the reamer.
Hold the fruit in place until the push block is in contact with it. Remove your hand before applying downward pressure.
Press down on the handle to extract juice.
Release the handle, and the juicer will return to the upright position.

Cleaning

Remove the reamer and strainer bowl from the base.
Wash them with mild soap and warm water.
Wipe the juicer with a damp soft cloth and sanitize it using an appropriate sanitizer.
Allow the parts to dry and reassemble the juicer.

Safety Spring Replacement

(For Safety Spring Replacement Kit: 181SPRGMCJ2)

Hold the handle in the upright position.
Using an Allen wrench, remove the screw from the knurled nut hat connected to the top of the safety spring shaft.
Remove the knurled nut hat and then take out the old safety spring from the shaft.
Place the new safety spring into the shaft.
Reconnect the knurled nut hat to the top of the shaft using the screw and the Allen wrench.

Replacement Parts

These replacement parts can be purchased from the same location as the juicer:

Expiration Date: 07/2023

CITRUS JUICER +SAFETY SPRING

MODELS

181MCJ2 – Manual Citrus Juicer with Safety Spring

Safety:

This juicer should only be operated by trained individuals. Be sure to read the operation and cleaning guide before using.
CAUTION: KEEP HANDS CLEAR OF JUICING FUNNEL WHEN IN USE TO AVOID RISK OF INJURY!

Position the juicer on a flat, dry countertop.
Press down on the base so that the suction cups hold the juicer to the counter.
Lock the bowl and straining funnel in place. There are notches on the bottom of each which can be inserted into the base and twisted to lock in place.
Place a container underneath the funnel to receive the juice.
Place halved fruit on reamer and hold in place until the push block is in contact with the fruit.
- REMOVE HAND BEFORE APPLYING DOWNWARD PRESSURE.
Press the handle down to extract juice.
Release handle and juicer will return to the upright postition.

USE CAUTION WHEN CLEANING

Remove reamer and strainer bowl from base.
Wash with mild soap (such as Noble Chemical’s 147SUNBRIGHT) and warm water.
Wipe the juicer with damp soft cloth and sanitizer (such as Noble Chemical’s 147QUIKSAN).
Allow parts to dry and reassemble.

Hold the handle in the upright position. Using an Allen wrench, remove the screw from the knurled nut hat that is connected to the top of the safety spring shaft.
Remove the knurled nut hat, and then remove the safety spring from the shaft.
Place the new safety spring in the shaft.
Reconnect the knurled nut hat to the top of the shaft using the screw and the Allen wrench.

These parts can be purchased from the same location as the juicer.