bodine BSL310C LED Emergency Driver Owner’s Manual
- July 2, 2024
- bodine
Table of Contents
Emergency Driver
LED
BSL310C
Emergency LED Driver
10 Watts Output Power
Listed for Factory or Field Installation
Class 2 Output
Product order number:
BSL310C2WM
BSL310CDFM
BSL310CDFT1M
BSL310C90
12NC number:
913702457101
913702457401
913702457201
913702456801
Project:—————-
Location:————-
Cat.No:———-
Type:———
Qty:———
Notes:——-
Specifications
Regulatory Certifications
UL Listed to UL 924 and tested to CSA 22.2, No. 141
Factory or Field Installation (Indoor and Damp)
Output Class 2 Compliant
Input Title 20 CEC Compliant
Illumination Time
90 Minutes
Full Warranty
5 Years (NOT pro-rata)
Universal Input Voltage
120-277 VAC, 50/60 Hz
AC Input Power Rating
4.0 W (Maximum)
Output Voltage
15-50 VDC
Output Power
10.4 W (Maximum)
Test Switch/Charging Indicator Light
Two-Wire Illuminated Test Switch
(2W-ITS is a Class 2 device)
Battery
High-Temperature, Maintenance-Free
Nickel-Cadmium Battery
7 to 10-Year Life Expectancy
Recharge Time
24 Hours
Temperature Rating (Ambient)
0-55°C (32-131°F)
Dimensions
15.34” x 2.25” x 1.16” (369 mm x 58 mm x 30 mm)
Mounting Center 15” (356 mm)
2’ (610 mm) Flexible Conduit
Maximum Weight
3.45 lbs (1.56 kg)
(Weight based on specific model, refer to following pages for more
information)
Benefits
- Listed for factory or field installation – UL 924 and CSA C22.2 No. 141
- Emergency Lighting Compliant
- Smart Charger Technology for low energy consumption
- Meets Title 20 CEC (California Energy Commission) efficiency standards
- Class 2 Output – UL 1310 Certified, CSA 22.2 No. 223-M91 compliant
- Emergency mode lumen output of up to 1300 lumens
- Compatible with AC drivers and LED loads rated for Class 2
- RoHS Compliant
Dimensions
15.34” x 2.25” x 1.16” (mounting center – 15.0”)
BSL310C
Emergency LED Driver, Class 2 Output
Application
The BSL310C / C-DF is UL Listed for factory or field installation and allows the same LED luminaire to be used for normal and emergency operation. The BSL310C universal input (120-277V) emergency LED driver works in conjunction with an AC LED driver that has an output current not to exceed 3.0 A. The emergency driver consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in one case. The BSL310C can deliver up to 10.4 watts to an LED load (measured at nominal battery voltage) for 90 minutes. If used in an emergency-only fixture, no AC driver is necessary. The BSL310C is suitable for indoor and damp locations. For more information about specific LED and AC driver compatibility, please call the factory.
Operation
When AC power fails, the BSL310C immediately switches to the emergency mode, operating the LEDs at a reduced lumen output for a minimumof 90 minutes. When AC power is restored, the emergency driver automatically returns to the charging mode.
Installation
The BSL310C does not affect normal fixture operation and may be used with
either a switched or unswitched fixture. If a switched fixture is used, an
unswitched hot lead must be connected to the emergency driver. The emergency
driver must be fed from the same branch circuit as the AC driver.
Installation is not recommended with fixtures where the ambient temperature
may fall below 0°C. The product is suitable for installation in sealed and
gasketed fixtures. The BSL310C is in a metal case with a separate 2W-ITS
switch kit. The optional BSL310CDF with dual flex conduit on one end is
available in two different configurations as shown below.
Emergency Illumination
The BSL310C operates an LED load of up to 10.4W at nominal battery voltage
for a minimum of 90 minutes.
Specification
Emergency lighting shall be provided by using an LED fixture equipped with a
Bodine BSL310C universal input (120-277 V) emergency driver. This emergency
drivershall consist of a high-temperature, maintenance free nickel-cadmium
battery, charger and electronic circuitry contained in one galvanized steel
case. An illuminated test switch (ITS) to monitor charger and battery and
installation hardware shall be provided. The emergency driver shall be capable
of delivering up to 10.4 watts to an LED load (15-50 VDC) for a minimum of 90
minutes. The BSL310C is suitable for indoor and damp locations. The BSL310C
shall have a maximum of 4.0 watts of input power and shall comply with
emergency standards set forth by the current NEC. This device complies with
Part 15 of the FCC Rules and meets Title 20 CEC (California Energy Commission)
efficiency standards. The emergency driver shall be UL Listed for field or
factory installation.
Warranty
The BSL310C is warranted for five (5) full years from date of manufacture (NOT pro-rata). Please see detailed warranty information on our website.
Bodine Product Storage Guidance
-
All batteries require periodic charging and discharging cycles. In general, here are the relevant battery chemistry industry standard guidelines to maintain optimal battery capacity for each battery type used by Bodine:
a. Nickel-based battery chemistries (Ni-Cd/Ni-MH) should be charged and discharged within 6 months.
At a minimum, the battery should be recharged within this time.
b. Lead-Acid battery chemistries, such as the Sealed Lead-Acid (SLA) batteries used in some Bodine products, should be fully recharged every 8 months.
c. Lithium chemistries should be fully recharged every 6 months. Though they can be stored for longer periods and still maintain their full effectiveness, they will not be able to provide the product with emergency power until they are recharged. -
Any battery stored for the time period mentioned above requires a full charge or for the product to be energized for its rated charge time in order to meet the full rated emergency run-time.
-
Batteries must be stored at temperatures between 0-40°C. However, optimal storage is 0-25°C. Storage at extreme temperatures will reduce the storage time possible and may permanently damage the battery.
Never store the product with the inverter connector (sometimes also called the “converter” or “unit enable” connector) closed. This enables the output and the control circuitry and will drain the battery in storage at a faster rate.
BSL310C
Emergency LED Driver, Class 2 Output
BSL310C model with single conduit
BSL310C
Metal case, single conduit on one end of case and 2-wire ITS kit
Weight: 3.08 lbs (1.40 kg)
Order no. BSL310C2WM
12NC: 913702457101
Optional BSL310C-DF model with dual conduit
BSL310C-DF-M:
Metal case, dual conduit on one end of case with 90° adapter and 2-wire ITS
attached to one conduit, and lead wires in the other.
Weight: 3.45 lbs (1.56 kg)
Order no. BSL310CDFM
12NC: 913702457401
Optional BSL310C-DF model with dual conduit
BSL310C-DF-T1-M:
Metal case, dual conduit one end with lead wires in each conduit and a
separate 2W-ITS kit with wall plate
Weight: 3.45 lbs (1.56 kg)
Order no. BSL310CDFT1M
12NC: 913702457201
Optional BSL310C with 90° conduit connector
BSL310C90:
Metal case, single conduit on one end of case with 90 degree connector and 2W-
ITS
Weight: 3.08 lbs (1.40 kg)
Order no. BSL310C90
12NC: 913702456801
© 2024 Signify Holding. All rights reserved. The information provided herein
is subject to change, without notice. Signify does not give any representation
or warranty as to the accuracy or completeness of the information included
herein and shall not be liable for any action in reliance thereon. The
information presented in this document is not intended as any commercial offer
and does not form part of any quotation or contract, unless otherwise agreed
by Signify.
BSL310C_C-DF.spec 02/24 page 4 of 4
Signify North America Corporation
400 Crossing Blvd, Suite 600
Bridgewater, NJ 08807
Telephone: 800-500-0050| Signify Canada
Ltd.
281 Hillmount Road,
Markham, ON, Canada L6C 2S3
Telephone: 800-668-9008
---|---
All trademarks are owned by Signify Holding or their respective owners.
www.bodine.com