Zeblaze GTR 3 Pro Smartwatch User Manual

Zeblaze GTR 3 Pro Smartwatch

Product Information

This product is designed to comply with Part 15 of the FCC Rules. It is a device that allows for the operation of equipment within certain parameters. It is important to note that any changes or modifications made to the device without the express approval of the responsible party for compliance may void the user’s authority to operate the equipment.

FCC Compliance
Part 15 of the FCC Rules sets forth the regulations for devices like this one. The device must meet the following conditions

1. The device may not cause harmful interference.
2. The device must accept any interference received, including interference that may cause undesired operation.

These conditions are in place to ensure the proper functioning of the device and to prevent interference with other electronic equipment.

Product Usage Instructions

To use this device, please follow the instructions below

1. Ensure that the device is connected to the appropriate power source.
2. Check that all necessary cables are properly connected.
3. Power on the equipment and wait for it to initialize.
4. Refer to the specific user manual of the equipment you wish to operate with this device for further instructions on how to configure and use it.
5. If you experience any interference or undesired operation, ensure that the device is accepting any interference received and check for any changes or modifications made without proper approval.

It is important to adhere to these instructions to ensure the proper and safe operation of the equipment and to comply with FCC regulations.

Product Introduction

1. Display
2. “seat button

Button Operation

Long press the start button

Power on

Short press the “start” button

1. Screen on
2. Return
3. Return to the main interface

Short press the “Back button

1. Return to the main interface
2. Screen off

Screen Operation

Swipe up interface

1. Message interface

Scroll down interface

1. Control interface

Left slide interface

1. Shortcut interface

Right slide interface

1. Main Menu

App Download

1. You can search for “Fit Cloud Pro” APP in App Store / Google play / App Store / Baidu Assistant to download.
2. Open the watch APP download interface, use the scan function, scan to download or scan the QR code attached to download.

Note: After successful download and installation, please follow the interface prompts to register and login for better experience and use of the product.

Connect Pair with the watch using the “FitCloudPro” app on your phone.

How to connect
Open APP »> “Device” »> “Add Device” »> “Start Search” »> Select the model and connect, wait for a while to complete the pairing.

Note:

1. In order to connect the watch and the phone successfully, you need to turn on the Bluetooth of the phone to connect the device.
2. When using an Android phone, the user needs to grant the location permission and enable the location information function of the mobile phone system, otherwise the device may not be searched.

Firmware Upgrade
The APP will prompt a new firmware version, and the user can enter the APP interface and select firmware upgrade.

Upgrade Notes

1. The upgrade operation can only be performed when the battery of the watch reaches more than 60%.
2. During the upgrade process, the mobile phone interface will prompt the upgrade progress bar, please do not do any operation on the watch, wait until the mobile phone prompts that the upgrade is successful, and the watch automatically restarts before operating the watch.

Waterproof Instructions
Waterproof grade : IP68 The waterproof performance of this product is not permanent and may weaken with the passage of time.

Add: It is not recommended to wear it in a hot bath. Water vapor produced when washing with hot water. Its molecular radius is small, and it is easy to penetrate into the gap of the watch case. When the temperature drops, it gradually condenses into water droplets, which damages the circuit board of the watch, and then damages the watch.

Function Introduction Smart watch support: Bluetooth call, message notification, blood oxygen detection, heart rate detection, sleep detection, breathing exercise, exercise mode, remote control photography, music control, etc.

Basic Parameters

Maintenance It is recommended to wear and maintain according to the following three points:

1. Keep the product clean
2. Keep the product dry
3. Please wear the product correctly

• For stains that are not easy to remove, it is recommended to scrub with alcohol.

Safety Instructions

1. Although smart watches can detect real-time dynamic heart rate, they cannot be used for any medical purpose.
2. Do not disassemble or modify the equipment and accessories without authorization. Please contact after-sales service in case of equipment failure.
3. If the equipment is not used for a long time, please make sure to power up once every three months.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>