SwitchBot W1301200 Security Indoor Camera User Manual
- June 15, 2024
- SwitchBot
Table of Contents
SwitchBot Indoor Cam
User Manual
Safety Information
- This camera is for indoor use only.
- Keep the device away from water, fire, humid or hot environments.
- Unplug this device during lightening storms or when unused for long periods of time.
- Do not attempt to disassemble, repair, or modify the device.
- Do not use damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- Do not use the device where wireless devices are not allowed.
- Adapter shall be installed near the equipment and shall be easily accessible.
Package Contents
Specifications
Product Name: SwitchBot Indoor Cam
Power Input: 5V **** 1A
Video Resolution: 1080P HD
Image Compression: H.264
Micro SD Card: Up to 128GB, FAT32 format
Operating Temperature: -15 °C to 45 °C (5 °F to 113 °F)
Relative Humidity: <95%
Wireless Standard: 802.11b/g/n (2.4GHz)
Name of Parts
Front
Bottom
Back
Side
Install Indoor Cam
The indoor cam can be placed on table, wall, ceiling and other flat
surfaces.
-
Place indoor cam without the base. Place indoor cam directly on a table or shelf or stick it on a flat surface using the 3M sticker.
-
Place indoor cam with the base.
Mount the base to the back or the bottom of indoor cam. The base can be attached to an iron surface or a magnet.
You can also stick the base to a flat surface using the 3M sticker.
After indoor cam is properly installed, tilt to a desired angle.
The base can also be fixed with screws.
-
Connect the power cable.
Now the red light of the camera stays lit up. When the red light flashes quickly, this indicates that the camera is waiting for network distribution. You can start using the camera according to the steps from “Getting Started”.
Getting Started
-
Download the SwitchBot app on App Store or Google Play Store.
|
https://play.google.com/store/apps/details?id=com.theswitchbot.switchbot&hl=en
2. Create a SwitchBot account and sign in into the app.
3. Place Indoor Cam close to the router.
Connect the USB cable to the back of Indoor Cam and to a 5V 1A USB adaptor.
Then plug it into a power outlet.
- On the app, tap the “+” icon on the top right of the Home page. Tap the “Indoor Cam” icon and follow the instructions to complete the setup.
Precautions
-
Scan the QR code to access the internet.
Make sure that the screen of your phone is brighter than the surrounding environment. -
Make sure the anti-rub function on Wi-Fi is turned off. If it is on, this may lead to a failure in connecting to the internet.
-
Please make sure the camera is connected to a 802.11b/g/n (2.4GHz), IPV4 wireless network.
How to Reset
Press the reset button on the back for 5 seconds or until you can hear a prompt tone.
Light Indication
| Status of LED Indicator Lamp | Status of Indoor Camera |
|---|---|
| Red | Stays lit up |
| Red | Flashes rapidly (0.25 s/ flash) |
| Green | Flashes slowly (1.5 s/ flash) |
| Green | Flashes rapidly (0.25 s/ flash) |
connecting to the internet
Green| Stays lit up| Decive is online
Red
- Green| Flashes rapidly alternately (0.25 s/ flash)| Connected to Wi-Fi router
but failed to connect to the internet
Red -
Green| Flashes slowly alternately (1.5 s/ flash)| Error in network connection
Return and Refund Policy
SwitchBot Indoor Cam has a one year warranty (start from the purchasing day). The situtations below do not fit the Return and Refund Policy
- Intended damage or abuse.
- Inappropriate storage (drop down or soaking in water).
- Modify or repair of product.
- Natural wearing of product.
- Natural disasters.
Contact and Support
Setup and Troubleshooting: support.switch-bot.com
Support Email: [email protected]
Feedback: If you have any concern or problem when using our products, please
kindly send feedback from the Profile > Feedback page in the SwitchBot app.
CE Warning
Manufacturer’s Name: Woan Technology (Shenzhen) Co., Ltd.
This product is a fixed location. To comply with RF exposure requirements, a
minimum separation distance of 20cm must be maintained between the user’s body
and the device, including the antenna.
Use only the supplied or an approved antenna.
This device in compliance with the essential requirements and other relevant
provisions of Direc- tive 2014/53/EU. All essential radio test suites have
been carried out.
- CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DIS- POSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
- The device complies with RF specifications when the device used at 20cm from your body
EU regulatory conformance
RF exposure information: The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of 20cm between the device and the human
body. To maintain compliance with RF exposure requirement, use product that
maintain a 20cm distance between the device and human body.
CE DOC
Hereby, Woan Technology (Shenzhen) Co., Ltd. declares that the radio equipment
type W1301200 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: support.switch-bot.com
UKCA DOC
Hereby, Woan Technology (Shenzhen) Co., Ltd.
declares that the radio equipment type W1301200 is in compliance with UK Radio
Equipment Regulations (SI 2017/1206).
The full text of the UK declaration of conformity is available at the
following internet address: support.switch-bot.com
Address: Room 1101, Qiancheng Commercial Center, No. 5 Haicheng Road, Mabu
Community, Xixiang Sub-district, Bao’an District, Shenzhen, Guangdong,
PR.China, 518100
Operation frequency(Max power)
Wifi:2412MH2-2472MHz(3.5dBm) ;
FCC Warning
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Any
Changes or ‘ modifications not expressly approved by the party responsible for
compliance could void the user’s ‘ authority to operate the equipment.
This equipment has been tested and found to ‘ comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits ‘
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not ‘ installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC RF exposure statement:
The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
www.switch-bot.com
V1.2-2110
Documents / Resources
|
SwitchBot W1301200 Security Indoor
Camera
[pdf] User Manual
W1301200 Security Indoor Camera, W1301200, Security Indoor Camera, Indoor
Camera, Camera
---|---