Inpods 12 User Manual: Learn How to Use, Charge & Connect
- June 2, 2024
- inpods
Table of Contents
The Inpods 12 User Manual provides comprehensive instructions on how to use, charge, and connect the Inpods 12 earbuds. With a driver size of 15mm and an impedance of 9 OHM, these earbuds have a Bluetooth version of 5.0 and a Bluetooth distance of up to 10 meters. The manual outlines the steps to follow to pair the earbuds with a device, including turning on Bluetooth in the device, searching for i12, and connecting to i12. Additionally, the manual provides product notes, including talk time and music time of about 2-3 hours when using a pair of earphones together and a charging time of 1-2 hours. The Inpods 12 also features a powerful noise de-noising circuit for active noise reduction. The FAQ section of the manual provides answers to commonly asked questions, such as how to turn on/off the earbuds, how to answer a call, and how to check the battery status. The manual also addresses concerns regarding connectivity, charging issues, and compatibility with different devices.
inpods 12
inpods 12
Specifications
- Driver: 15mm
- Impedance: 9 OHM
- Bluetooth version: Bluetooth 5.0
- Bluetooth distance: 10 meters
- Operating voltage range: 3.0V-4.2V
- Charging time about 1-2 hours .
How to Use i12 inpods:
1. Tap the charging case power on switch
2. Open the charging case and take off the earbuds
3. The earbuds will auto-power on and enter pairing mode (important reminder:
to auto-power-on the earbuds, the switch on the charging case must be turned
on)
3. Pair with the device:
3.1 turn on Bluetooth in the device
3.2 search i12 and connect to i12
Product Notes:
- Talk time is about 2-3 hours (a pair of earphones use together ),music time about 2-3 hours (a pair of earphones use together ) , Charging box can charge for the earphons about 3-5 times.
- Powerful noise de-noising circuit (active noise reduction)
- Output power: 40mW;Battery capacity 35MAH , charging box is 300mh .
- Frequency response: 20-20000Hz
- Powerful noise de-noising circuit (active noise reduction)
Specifications
Product Specifications
|
|
---|---|---
Driver
|
15mm
|
Impedance
|
9 OHM
|
Bluetooth version
|
Bluetooth 5.0
|
Bluetooth distance
|
10 meters
|
Operating voltage range
|
3.0V-4.2V
|
Charging time
|
About 1-2 hours
|
Output power
|
40mW
|
Battery capacity
|
35MAH
|
Charging box capacity
|
300mh
|
Frequency response
|
20-20000Hz
|
FAQ’S
Why can’t I connect to the earphones?
Please check if your phone supports Bluetooth 5.0 and make sure the earphones are turned on. Also, please try to put the earphones closer to your phone.
How do I pair with my device?
Turn on Bluetooth in your device, search for i12, then connect to i12.
How long does it take to charge?
It takes about 1-2 hours to charge fully.
What is the battery life of a single earbud?
About 2 hours talk time and music time about 2 hours (a pair of earphones use together ).
Are Inpods 12 and i12 the same?
The i12 tws and the Inpods 12 are a very cheap alternative to the well-known white earbuds from a fruity American brand. And wow, they can be so good. You can, because you just have to have the right one. In the meantime, lesser ears are also called ‘i12’.
Is inPods 12 waterproof?
The i12 TWS AirPods is waterproof and can withstand sweat or splashing during daily exercise, which is suitable for running or exercise wearing.
Does inPods 12 have mic?
A one InPods 12 Earbud BT 5.0 Wireless Headphone with Mic (Bluetooth) Bluetooth Headset (Yellow, True Wireless) The inPods 12 TWS 5.0, True Wireless Stereo is newest addition to wireless bluetooth headphones.
How do I turn off my inPods 12?
How to turn on /off the i12 TWS?
Power on: the two i12 TWS earbuds will turn on and pair each other
automatically after taking out from the charging case.
Power off: long-press the power button.
Note: Delete the paired information: in pairing mode, 5 click the power button
until LED-lit RED.
How do you answer a call on i12?
How to answer the phone call with i12 TWS earbuds? Answer/End call: press once power button. Reject call: double press the power button.
What does blue light on i12 mean?
The i12 TWS will be matched into a normal red and blue flash of one headset, and the other headset will flash a blue light every 5 seconds. Step 3: At this point, you can connect to Bluetooth and use two i12 TWS headphones synchronously. Note: Repeat step 2 if the match is not successful.
How do you check an Inpod battery?
After installing the app, open the lid on your AirPods’ charging case and a popup — similar to the one you get on iPhone — will show up on your Android device. Battery stats for the case and each AirPod will be displayed.
Why isnt my left i12 working?
Step 1: Delete the left and right earbuds pairing information (Reset the i12 TWS). In pairing mode, 5 click the power button until LED lit RED. Step 2: Long press the function key for 5 seconds to turn on the i12 TWS. Step 3: Enter pairing mode, pairing time is about 5 seconds, prompt tone “pairing mode”.
Why are my Inpods not charging?
Check your connections. If you have AirPods or AirPods Pro, make sure that the Lightning to USB cable is firmly plugged into the charging case and USB power adapter. Then make sure that the power adapter is correctly plugged into a power outlet.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>