Graywind 58510 Smart Outdoor Shades User Guide
- June 17, 2024
- Graywind
Table of Contents
Graywind 58510 Smart Outdoor Shades
Product Information
Specifications
- Product Name: Outdoor Solar Smart Blinds
- Model Number: 58510
- Version: 1.0
- Date: 18, May, 2023
Why Graywind?
We are dedicated to providing a perfect life experience through a combination of light, shadows, technology, art, and customization. Our goal is to offer convenient, pleasant, and elegant living experiences to all our customers.
- Ultra Smart Life: Embracing technology and innovation to create a smart living environment that is convenient, safe, and enjoyable.
- Explore Pure Beauty: Representing the harmony between light and shadows to bring grace and artistry to living spaces.
- Enjoy Freedom: Offering stylish products that allow users to express themselves freely and enjoy a sense of liberation.
Socialize With Us
If you are satisfied with your motorized blinds, activate the product warranty by visiting our website and following the activation steps. For any issues or after-sales support, contact us anytime.
Product Usage Instructions
Parameters
The motor is in a non-signaled state upon receipt. Remove the signal blocker to activate it.
- LED Light
- Charging Port
- Reset Button
- Signal Receiver
Zigbee & Bluetooth Battery Motor
- Charging: Fully charge the motor for over 8 hours before first use. Once fully charged, it can operate for 3-6 months based on usage frequency.
- Status Indicators: Orange light flashing indicates low power, blue light flashing means under charging, solid blue light signals full charge.
Remote Control
Battery Installation: Insert two Lithium Cell CR2450 3V batteries into the remote control.
Frequently Asked Questions
- Q: How do I activate the product warranty?
- A: Visit our website, register an account, navigate to Product Activation tab, fill in required information & order ID, then submit for activation.
- Q: What should I do if my motorized blinds are not working upon receipt?
- A: Ensure the battery motors are charged for 8-10 hours before use. If the parcel is damaged, take photos and contact customer service.
“`
58510
OUTDOOR SOLAR SMART BLINDS
USER GUIDE
Version: 1.0 Date: 18, May, 2023
WHY GRAYWIND
We are a group of seekers for perfect life, looking for inspiration from the
purest light and shadows. What we want to share is not only window decoration,
but also technology, art and customization. We are committed to bringing
convenient, pleasant and elegant life experience to every customer.
Ultra Smart Life Graywind embraces technology and persists in continual
innovation as well as creating a brand new smart life experience, bringing our
user a more convenient, safer and more enjoyable living environment.
Explore Pure Beauty Graywind represents the harmony between light and shadows,
which grants the space graceful versatility and artistical sight. Our users
can seek for the beauty of life and enjoy happiness.
Enjoy Freedom Graywind refuses to be mediocre and releases unique true self.
We offer stylish designed product to our users. They can delight themselves,
show themselves and release themselves without restriction of rule and enjoy
from the freedom.
SOCIALIZE WITH US
SATISFIED
If your motorized blinds are running without any issues, we invite you to
activate product warranty. 1. Search graywindblinds.com or scan QR code to
visit our website. 2. Register and click account to enter personal page. 3.
Choose Product Activation tab, fill in info & order id,
then submit. 4. Activation done.
DISSATISFIED
We will pre-program and double check before shipment. For battery motors,
please charge them for 8-10 hours before first use. If the parcel you received
isn’t in good condition, please take photos and confirm whether they still
work. Any after-sales questions, please scan the QR code and contact us. We
are always at service 24/7. Customer Service: service@graywindhome.com
CONTENTS
A PARAMETERS
A-1. Zigbee & Bluetooth Battery Motor
1-2
A-2. Remote Control
Install The Battery
3
Parameters
4
B INSTALLATION B-1. Preparation
B-2. Accessories
B-3. Installation Ceiling-Wall Installation Side-Wall Installation
Installation Of Blind With Wire Guide Installation Of Blind Without Wire Guide
5 6
7-8 9-10 11-22 23-27
C APP CONTROL C-1. Zigbee Battery Motor C-2. Bluetooth Battery Motor
28-33 34
REMOTE CONTROL PROGRAMMING
D-1. Sleep Mode
36-37
D-2. Enter Setting Mode
38
D-3. Motor Programming
39-50
A. PARAMETERS
1
A-1 ZIGBEE & BLUETOOTH BATTERY MOTOR
The motor is in non-signaled state when received. Please remove the blocker to wake it up.
Signal Blocker
LED Light Charging Port Reset Button Signal Receiver
78.7″(2m) Type-C Cable x1
78.7″(2m)
Extension Cord x1 (Optional)
2
5V2A Charger (Not included)
Solar Panel
(Optional)
1. Please fully charge the motor for more than 8 hours
before the first use. 2. Once fully charged, it can be used for 3-6 months
depending on the frequency of use.
Out of power:
Orange Light Flashing
Under Charging:
Blue Light Flashing
Fully Charged:
Solid Blue
A-2 REMOTE CONTROL
Magnetic Holder
3
Lithium Cell CR2450 3V
CR2450(3V)
s x2
INSTALL THE BATTERY
Your blind has been programmed, please control it after installation.
Lithium Cell CR2450 3V
Lithium Cell
CR2450 3V
Lithium Cell CR2450 3V
PARAMETERS FRONT
Group icon: Group “1-6″ Up – Channel Down Favorite Position
4
Channel ” 00 “:
Group control all blinds Channel “1-16”: Control max 16 blinds separately
Channel + Stop
BACK
Set Key T
Set Key P
Lithium Cell CR2450 3V
Lithium Cell CR2450 3V
INSTALLATION
5
B-1 PREPARATION
5m
- Drilling hole size 6mm Recommended size of drill bit: 15/64”
B-2 ACCESSORIES
6
v
bL x1
bR x1
k1 x4 k2 x4 k3 x4 k4 x2
s1 x4 s2 x2 cL x1
cR x1
c1 x2
m1 x2
m2 x2
q x1 c2 x2 s3 x4
f xn
B-3 INSTALLATION
7
CEILING-WALL INSTALLATION
1 Put mounting brackets on both sides of the blind and mark the positions of the brackets.
v
2 Mark punch positions by referring to the positions of brackets.
bL
bR
3 Drill holes & install mounting brackets.
bL
bR
f
f
4 Install the blind.
bL v
8
bR v
5 Remove paper seal.
6 Use the remote control to lower the blind (Install the battery first).
SIDE-WALL INSTALLATION
9
1 Put mounting brackets on both sides of the blind and mark the positions of the brackets.
v
2 Mark punch positions by referring to the positions of brackets.
bL
bR
3 Drill holes & install mounting brackets.
bL
bR
f
f
4 Install the blind.
bL v
10
bR v
5 Remove paper seal.
6 Use the remote control to lower the blind (Install the battery first)
INSTALLATION OF BLIND
11
WITH WIRE GUIDE
1
k1
k1
k2
k2
s1
s1
k3
k3
12
2
k4
k4-1
k4-2
k4-1
k4-1
s2
s2
3
k4-2
m1
k
13
4
k
k
5 Put it back and turn two laps.
c1 2x
c1 2x
cL
cR
cL
cR
14
6
magnet
cL
cR
magnet
7 Move the blind to the desired bottom position, so as to install the fixings at the bottom.
Method 1General installation of bottom fixings
1 Mark the position of bottom fixings.
15
2 Separate the bottom rod and bottom
fixings “cL” & “cR”andmark punch positions.
cL
cR
3 In order to install the bottom fixings easily,
please take c1 down.
c1
c1
16
cL
cR
4 Drill holes & install bottom fixings.
f
f
cL
cR
5 Put it back and turn two laps.
c1 2x
c1 2x
cL
cR
cL
cR
6 Cut wire guide precisely.
17
Cut at the middle ofc1
7 Thread m2through the wire guide, and thread
the wire guide in the bottom rod.
m2 m1
8 Loosen the screws.
q cL
q cR
9 Thread the wire guide into the hole of c1.
18
m1 c1
10 Tighten the screws.
q cL
m1 c1
q cR
11
TMigohvetemn c21
until wire becomes
downward.
taut.
m2
m2
19
c1 cL
c1 cR
cL
cR
(Overall effect)
Method 2Side-wall installation of bottom fixings
1 Combinec2 & “cLcR” cL cR
c2
s3
2 Mark the position of bottom fixings.
20
21
3 Separate the bottom rod and bottom
fixings “cL” & “cR”andmark punch positions.
cL
cR
4 In order to install the bottom fixings easily,
please take c1 down.
c1
c1
cL
cR
5 Drill holes & install mounting brackets.
22
cL f
cR f
6 Please refer to P20-P23 for the following installtion steps (by step 5-11).
(Overall effect)
INSTALLATION OF BLIND WITHOUT WIRE GUIDE
1
23
k1
k1
k2
k2
s1
s1
k3
k3
24
3
magnet
cL
cR
magnet
4 Move the blind to the desired bottom position, so as to install the fixings at the bottom.
Method 1General installation of bottom fixings
1 Mark the position of bottom fixings.
25
2 Separate the bottom rod and bottom
fixings “cL” & “cR”andmark punch positions.
cL
cR
3 Drill holes & install mounting brackets.
f
f
cL
cR
26
(Overall effect)
Method 2Side-wall installation of bottom fixings
1 Combinec2 & “cLcR”. cL cR
c2
s3
2 Mark the position of bottom fixings.
27
3 Drill holes & install mounting brackets.
cL
f
(Overall effect)
cR f
APP CONTROL
28
C-1 ZIGBEE BATTERY MOTOR
Please check if the top and bottom limits are already set before connecting to Alexa. The 5 models of Alexa below can connect to blinds directly. But for other models, a Zigbee Hub is needed:
Echo Plus Echo
Echo Echo Show 10 Echo Show
(2.Gen.) Studio (4th Gen) (3rd Gen)
(2nd Gen)
ALEXA CONNECTION STEP 1
1
Hold for 6s
Blind jogs 2x
Release the reset button and blue light flashing.
You also can refer to Page 50 to achieve faster connection with Alexa device via remote.
29
2
Please say “Alexa, discover my devices”
“OK”
“I`ve found first device”
If Alexa doesn’t reply “I’ve found first device”, please enter in the page of
“All devices” in Alexa app to check if it has already been connected
successfully.
STEP 2 SET DEVICE NAME
2
1
3
4
VOICE CONTROL
30
Please say
Alexa, open/close (device name). Alexa, open/close (device name) to 1~100%.
If you use the echo4, please refer to the instructions below:
Echo (4th Gen)
Please say
Alexa, open/close (device name). Alexa, open/close (device name) to 1~100%.
For different echos and firmware versions, voice commands are various. Please
try with different commands.
STEP 3 CONTROL THE BLIND VIA ALEXA ROUTINE
2 1
3
4 5
Enter the routine name.
31
6
8 7
Enter content of voice command.
32
9 10
11 13
12
Drag to adjust open percentage.
33
14
You can add multiple blinds here. In order to control (device name) better,
You can set up multiple routines based on different usage scenario, such as
fully open, fully closed, half-open etc.
Congratulations Now you can free control the blind via Alexa routine!
C-2 BLUETOOTH BATTERY MOTOR
1 Download & Open “Graywind” APP
34
Graywind Home 2 Sign Up/ Log in
3 Click “Add Device” on home page, press “BLE Shades/Blinds”, then follow
steps.
4 Please scan the QR code for specific operations. PDF Version & Video Guide:
For more functions like timing, long-range control etc, or Alexa/Google Home
control, you need to buy BLE hub separately. For details, please contact
customer service.
or
BLE Hub
Alexa
Google Home
REMOTE CONTROL PROGRAMMING
D-1 SLEEP MODE
WAKE UP:
36
Hold for 2s
Blind jogs 1x
ENTER IN SLEEP MODE:
1
Hold for 2s
2
Blind jogs 1x
Hold for 2s
Blind jogs 1x
CHECK:
UNDER NORMAL OPERATION MODE The top and bottom limit positions are already
set.
1
37
Press 1x
2
Move up or down
Press 1x
Stop
UNDER SLEEP MODE
Press 1x
Orange Light
Flashes 3x
D-2 ENTER SETTING MODE
38
1. It will exit setting mode if pressing ” T ” for 6s 2. It will exit setting
mode if there is no operation
for 3 mins.
Press ” ” or ” “, choose the channel you want to set from “1-16″
Lithium Cell CR2450 3V
Hold ” T ” for 6s
” ” shows on the screen, enter setting mode.
D-3 MOTOR PROGRAMMING
HOW TO SET GROUP CONTROL
39
Press ” ” or ” “, choose the group you want to set.
Press and hold ” ” & ” ”
” ” shows on the screen
Until ” ” flashes, release buttons, Now you can add channels in this group.
Press ” ” or ” “, choose the channel
This step can be repeated.
40
Press ” “, if the channel icon is not flashing, it means this channel is
already in the group. Press ” “, if the channel icon is flashing, it means
this channel is not in the group.
Press ” ”
” ” shows on the screen
41 HOW TO CHECK SPECIFIC CHANNELS
IN A GROUP
Press ” ” or ” “, choose the group you want to check
Press and hold ” ” & ” ”
” ” flashes and release buttons, Now you can check the channels that are added in this group
Press ” ” or ” “, check channels in a group
Press ” ” , exit view
It will show ” ” if no channels are added in this group.
SET FAVORITE POSITION
42
1. The favorite position is not set at factory. 2. Before setting the
favorite running position,
please make sure the top and bottom limit positions are already set. 3. Please
ensure the remote is in setting mode before doing steps below:
1 Run the blind to favorite position you want to set (except fully open and
fully closed)
2
Press ” ” & ” ”
Blind jogs 2x
DELETE FAVORITE POSITION
Press ” ” & ” ”
Blind jogs 1x
HOW TO CHANGE UP/DOWN DIRECTION
43
Method 1 Please ensure the remote is in setting mode before doing steps below:
Hold ” ” for 10s
Method 2
Blind jogs 3x
Hold for 10s
Blind jogs 3x
HOW TO ADJUST RUNNING SPEED OF BLIND
44
1. Before adjusting running speed of blind, please make sure the top and
bottom limit positions are already set.
2. Please ensure the remote is in setting mode before doing steps below:
Speed up Please move the blind to the top limit position before the setting.
Hold ” ” for 6s
Blind jogs 1x
Slow down Please move the blind to the bottom limit position before the setting.
Hold ” ” for 6s
Blind jogs 1x
If motor doesn’t jog, the max/min speed has already been reached. There are 3 kinds of speed available.
DELETE TOP LIMIT POSITION
45
Please ensure the remote is in setting mode before doing steps below:
Press ” ” & ” ”
Blind jogs 1x
DELETE BOTTOM LIMIT POSITION
Please ensure the remote is in setting mode before doing steps below:
Press ” ” & ” ”
Blind jogs 1x
DELETE TOP & BOTTOM LIMIT POSITIONS
1. The favorite position will also be deleted. 2. Please ensure the remote is
in setting mode
before doing steps below:
Hold ” ” for 6s
Blind jogs 1x
SET TOP LIMIT POSITION
46
Please ensure the remote is in setting mode before doing steps below:
1
Run the blind to top limit position you want to set.
2
Press ” ” & ” ”
Blind jogs 2x
SET BOTTOM LIMIT POSITION
Please ensure the remote is in setting mode before doing steps below:
1
Run the blind to bottom limit position you want to set.
2
Press ” ” & ” ”
Blind jogs 2x
UNPAIR THE MOTOR
47
1. Please ensure the remote is in setting mode before doing steps below
2. After doing this, all paired remotes will lose connection with the motor.
Press ” ” & ” ”
Blind jogs 1x
RESET THE MOTOR
Hold for 16s
Blind jogs 4x
Zigbee & Bluetooth Battery Motor will enter in sleep mode after being reset. Please wake it up before repairing.
RE-PAIR THE MOTOR
48
Please ensure the remote is in setting mode before doing steps below:
1
Hold for 2s
Blind jogs 1x
2
Lithium Cell CR2450 3V
Press “P” 1x
Blind jogs 2x
ADD NEW REMOTE “B”
49
Please ensure the remote is in setting mode before doing steps below: 1 Paired
remote “A”
A
Hold ” ” for 2s
2 Unpaired remote “B”
B
Blind jogs 1x
Press ” ” or ” “, choose the channel number.
3 “B” Enter setting mode, refer to Page 38.
4
B
Lithium Cell CR2450 3V
Press “P” 1x
Blind jogs 2x
CONNECT WITH ALEXA DEVICE VIA REMOTE
1 Enter setting s mode
50
Lithium Cell CR2450 3V
Press ” ” or ” “, choose the channel you want to set from “1-16″
Hold ” T ” for 6s
” ” shows on the screen, enter setting mode.
2
Hold ” ” for 6s
Blind jogs 2x
Release the reset button and blue light flashing.
ENGLISH VERSION |
Please scan the QR code below to get the PDF manual in English.
GERMAN VERSION |
Bitte scannen Sie den untenstehenden QR-Code, um die PDF-Broschüre auf Deutsch
zu erhalten.
JAPANESE VERSION |
QR PDF
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>