Zeblaze HYBRID Smartwatch User Manual
- June 7, 2024
- Zeblaze
Table of Contents
Zeblaze HYBRID Smartwatch User Manual
Specifications
Hardware configuration
Quartz movement: AL35E
Quartz battery: SR626SW
Programmed: nRF51802
Bluetooth: BT4.0
Display: OLED 0.49 (64×32)
3D Sensor: SC7A20
Heart Sensor: EM7028
Motor: Flat 0820
Programmed battery: 90mAh
Performs
BT distance: 5 – 10m (Open space)
Quartz standby: 3 years
Programmed standby: About 7 days (Depending on frequency of use)
Waterproof level: 5ATM
Button life: 100K times
Touch life: 100K times
Electrical parameter
Operating voltage: 3.8V
Working current: 100uA
(display off), 15mA (display on)
Standby current: 30 – 80uA (All function turned off)
Vibration current: 5mA
Motor frequency: 12000
Material process
Watch case: Carbon fiber + PC
Top ring: Zinc alloy
Watch glass: Double glass
Button: 316L stainless steel
Strap: Silicone
Strap buckle: 316L stainless steel
Bottom cover: 316L stainless steel
Watch case size: 45.0 x 16.5mm
Adapter strap: 20.0mm (strap width)
Suitable: 150 – 205mm (wrist perimeter)
Unit weight: 58.0g
Dear user:
Thank you for your favor. It’s not only a traditional quartz watch, but also a
Hybrid smart watch integrating health & sport, mobile phone assistant and
smart OLED display. For better use of this watch, please read this Operation
Guide before using it. All illustrations for this Operation Guide are for
reference only and products are subject to the actual ones.
Watch hand alignment
Watch hand timing start- up
Remove the crown stop card and push crown into the watch body, then watch hand
will start- up.
Adjust the time
When the watch crown is pulled out, and turn it to adjust time. (Note: watch
display time automatic synchronization APP pairing mobile time, see related
chapter introduction)
Replacement of quartz battery
The quartz core of the watch has its own button battery, which can be used for
more than 3 years. When you find that the watch hand is stopped, please change
to the same type button battery in time.
Boot and charge
Boot instruction
This watch does not support power on/off operation. the smart module will automatically turn on when the polymer battery power is >0% and turn off when power is 0%.
How to charge
- The attached accessories have a charging seat and USB cable, which should be used with standard charger (within 5V/ 2A) or standard USB power supply. Connect the charging seat and charger (or USB) with the USB cable, and then connect the charger to a power outlet.
- The charging base adopts 360 polar less charging design.
- It takes about 2-3 hour for the watch to be fully charged, and when the charging indication shows 100%, indicating full charge.
APP download and install
In order to better use the smart functions of this watch. You need to install APP on your smartphone. iPhone system needs to be IOS 8.2 or above, Android mobile system needs to be Android 4.3 or above.
QR scanning installation
This APP supports Apple mobile phone or Android mobile phone, please scanning
the following QR to download and install APP.
http://comfit.app168.com/index.php/home/common/downPage
Search and install
iPhone: search and install “Comfit” on App Store. Android phone: search and
install “Comfit” on Google
play.
Android (China): search and install “Comfit” on App
Store.
App binding watches
Step(1): Access to the APP, register your user account.
Step(2): Turn on the watch and BT, and take it close to your mobile
phone.
Step(3): Access to the APP footer menu “Mine” and click “Comfit device”
(1) ; wait for the mobile phone: Search for “HYBRID” and click (2) to
start BT connection.
Step(4): After the successful connection, the app automatically enters
the “Comfit device” interface; click “Looking for device” (3) , If the
watch vibrate to verify the success of the watch and the mobile phone binding.
More operation instructions
In order to update the instructions in time, we arranged “more operation instructions” in the menu of APP. For further understanding of product operation, please go to “Mine – Help” of APP. (Note: Before reading “Help”, the watch and mobile APP must be bound first)
Warranty
Thank you for your selection of our products and services. In order to protect your consumption rights, we hereby give you the following quality assurance instructions for the products you purchase.
Warranty service content
- Product warranty period is 12 months from the date of purchase (packaging materials do not belong to the scope of warranty);
- After the purchase of this product within 7 days of quality problems, and the appearance of no future generations for injury, you can directly replace the same style of the same model of the new machine;
- In the event of product failure, it is recommended that you first consult your sales organization, excluding misoperation factors, they will arrange after-sales repair services for you.
The following conditions are not included in the scope of the warranty
- Products are beyond the warranty period;
- Failed to issue a purchase certificate or the company can not verify the date of purchase;
- External reasons cause the product of breaking and grinding, scratch, and fracture caused by non normal wear watchband;
- Products are damaged due to the failure caused by water;
- Failure or damage to the product due to force majeure such as earthquake or fire;
- Other non product design, manufacturing defects resulting in quality problems.
Maintenance instructions
- When sending and repairing, we only accept bad devices (hosts or accessories), please do not send unrelated devices together to the sales organization or after-sales service center;
- Please show the QC certificate card and purchase certificate, as well as the product failure description;
- Shipping costs incurred by sending and transporting goods and transportation should be borne by the sender;
- After the maintenance of products continue to enjoy the warranty period of the after- sales service.
Our customer service team will continue to work hard to do better Here’s our contact information’s: