xiwxi xwx-tag10 Anti Loss Device Instructions
- June 13, 2024
- XiWXi
Table of Contents
xiwxi xwx-tag10 Anti Loss Device Instructions
Remove and install the battery
Step1: Open the battery cover.
Step2: Remove the battery.
Add xwx-tag10 to Apple Find My
Add xwx-tag10 with factory setting state
- Update to the latest version of iOS or iPadOS. Turn on Bluetooth of your phone, then pull the mylar out of xwx-tag10.
- Open the Apple Find My app, tap +, then tap Add Other Item , search for xwx-tag10, and follow the onscreen instructions.
Add xwx-tag10 in other state
-
Resetting
If xwx-tag10 is not added to the Apple ID after ten minutes, Bluetooth will stop transmitting to save power. You need to power off/on the battery five times to reset it again. Reset is successful if hear a different power-on sound. Then you can start adding to Find My again. The method is the same as 2.1. -
If order to pair xwx-tag10 with another Apple ID, First remove it from Find My by tapping on the Items tab, tapping the name on the xwx-tag10 item, scrolling down to the bottom of the detail card, and then tapping Remove Item. It can then be added again by following the instructions in 2.1.
Operation Instructions
Find items at close range- Play sound functionFor the paired xwx-tag10, within the short range of the owner’s Apple device, you can click “Play Sound” in the Find My app, or say “Hey Siri, Find my wallet” to play sound, and the device will play sound to indicate the location. If it’s hiding nearby, such as under a cupboard or in the next room, you can easily follow the sound to find it.
xwx-tag10 is away from the owner
The owner can see the location of the lost xwx-tag10 on Apple device, navigate
by the map to find xwx-tag10 and items.
Lost Mode- Find thing easier
xwx-tag10 can be set as Lost mode. Open the “Find My” app, select and added
“xwx-tag10”, click on the “Lost mode”, following the instruction of the app,
enter the phone number, then setting is successful. In Lost Mode,You’ll
automatically get a notification when it’s detected by otherdevices in the
Find My network. So if others pick up your xwx-tag10, theycan know how to
contact you by following the learn more instructions in Find My app. People
nearby also can identify this lost xwx-tag10, and get the contact info if you
have set in lost mode, and send a message to the owner, help the owner find
the lost items.
Find Items with help from hundreds of millions of friends
Find My Network will help you find your belongings when they are left behind, xwx-tag10 will send out a secure Bluetooth signal that can be detected by nearby iOS devices in Find My Network, these devices send the location of your xwx-tag10 device to iCloud, then you can go tothe Find My app and see it on the map. The whole process is anonymous and encrypted to protect your privacy. And it’s effcient, so there is no need to worry about the battery life and data usage.
Prevent unwanted tracking
To prevent unwanted tracking, when someone else’s xwx-tag10 is seen travelling with you for a period of time, your iOS device will find it and send you an alert notification. If you haven’t found this device after a while, it will play a sound so you can find it. But don’t worry, ifsomeone next to you has a xwx-tag10 device, as long as the device is near it’s owner, you will not receive a notification.
Privacy Protection
Only you can see where your xwx-tag10 is. No location data or location history is physically stored inside xwx-tag10. Communication with the Find My network is end-to-end encrypted so that only the owner of a device has access to its location data, and no one including Appleand xiwxi knows the identity or location of any device that helped find it.
Warm Tips
- xwx-tag10 is a precision device. Don’t discard it, and don’t let it be overly affected.
- Keep away from all heat and fire sources, such as heating equipment, heaters, ovens, flames and exposure to sunlight.
- Do not repair or disassemble the equipment by yourself.
- Avoid use or storage in high humidity or temperatures above 60℃, otherwise it may cause failure.
- Dispose of products in accordance with local government regulations on waste disposal.
To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended. The Find items app on Apple Watch requires the latest version of watchOS.
Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
Specifications
- BLE 5.2 32-bit processor Bluetooth system.
- Works with the Apple Find My network.
- No need to install anything, just use the Apple Find My app.
- The built-in motion detector is used for unwanted tracking detection through Apple Find My.
- Built-in buzzer to Find devices using Apple Find My.
- Waterproof and dustproof grade:IP66.
- Battery type:CR2032 (user-replacable)
To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended. The Find items app on Apple Watch requires the latest version of watchOS.
Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Address: Shatou Industrial Park, Shajing Town, Bao’an District, Shenzhen, Guangdong Province, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>