Shenzhen Xiwxi Technology OW30 True Wireless Earbuds User Manual

June 6, 2024
Shenzhen Xiwxi Technology

OW30
User Manual

Thanks for using our wireless electronic products. For a good user experience, please read the manual carefully before using the products. Notice: to avoid unnecessary troubles please do not disassemble these products by yourself and use the standard charger.

Product overview

Ear caps

We provide three sizes of ear caps (large, medium, and small). Please use the proper size of ear caps to fit your ears to get a better wearing experience.

Earphone operation

Instructions for pairing with Earphones
  1. Take out the earbuds from the charging case and remove their protective cover.

  2. Put back these earbuds into a charging case for charging
    (the earbuds are activated when the red light flashes)

  3. Take earbuds out from the charging case again, they will automatically turn on and enter the pairing mode.

  4. Open your Bluetooth function on your phone, search for the device with the name of “P3” and click connect.

Tip: if you fail to pair the earbuds on first-time pairing, or there is no sound on each side, please do as follows:

Pairing the left and right earbuds

Tip: if you fail to pair the earbuds on first-time pairing, or there is no sound on each side, please do as follows:

  1. Turn off these two earbuds, hold them and press MFB buttons for about 8 seconds and their blue light will flash, then earbuds will enter automatic pairing mode. (Red/blue light blinking alternately)
    Turn on the phone’s Bluetooth function and search for the Bluetooth device with the name of ” P3 ” and click connect.

LED indicator

Charging for case
Status               Light
Charging case charging The red light long bright
Full battery The red light dies out
Charging for earbuds The blue light long bright
Low Battery The blue light flickers
Earbuds indicator
Status Light
Turn on Blue light flashes for 1  second
Turn off Red light flashes for 1 second
Search earbuds Red and blue flash alternately
Connected successfully light flashes in red and blue for 6 seconds
Music play No light
Low battery Red light flashes
Charging Red light on
Full Red light off, blue light on 5 seconds then off.
How to Reset

If one earbud connect the phone/ the two earbuds can not pair together, please try the below new reset steps;

  1. Clear Record
    – Turn off the Bluetooth of the mobile phone and earbuds together, then press the MFB buttons for about 5 seconds and release.
    – Earbuds will enter the pairing mode (red/blue lights flash alternately), and press the MFB buttons 5 times quickly, the red light will flash for 1 second and these earbuds will restore to factory settings and automatically turn off.

  2. After resetting the earbuds, please delete the Bluetooth connection of ” P3 ” on your phone, and then re-pair.

Charge

Earbuds charging

  1. Put the left and right earbuds into the charging case, and the red indicator will turn on.
  2. The red light keeps on during charging.
  3. The red light turns off after the earbuds are fully charged, and the blue light turns off after a few seconds.
    Charging case Please use output voltage DC5V/1A charger, using a certified USB charger.
    Charge warning while charging, do not press the earbud power button, which will cause pairing failure, then you need to reset.

Button control

Power on Automatically turn on when the take-out case
Power off Automatically turn off when back into the case
Previous track Triple tap left earbud MFB Button
Next track Triple tap right earbud MFB Button
Volume – Hold and press left earbud MFB Button
Volume +  Hold and press right earbud MFB Button
Play / Pause double tap any MFB Button
Answer the call double tap any MFB Button
Hang up double tap any MFB Button
Reject call hold and press any MFB Button for about 2s
Voice-activated assistant tap any MFB Button  4 times

Specifications

Version    V5.0
Support A2DP, AVRCP, HFP, HSP
Transmission distance ≥ 10m
Frequency range 2.402GHz~2.480GHz
Speaker Φ 10mm*2
Impedance 32 Ω
Standby time 70 hours
Talk time 4 hours
Playing time 4 hours
Earphone battery capacity 40mAh
Fully charged time 1 hour
Charging case battery capacity 420mAh
Version    V5.1
Support A2DP, AVRCP, HFP, HSP

WIRELESS CHARGING

Designed for modern life, never be strangled by headphone cables.
Enjoy the convenience of wireless charging and free charging devices provided by airports, hotels, and cafe shops around the world.

(Wireless Charging Pad Not Included)

Waterproof

Waterproof for daily life, you cannot submerge earbuds into water. Ideal for sweating it out at the gym, or you can wear these earbuds while washing your face, showering, running in the rain…but not use them while you are diving or swimming.


rain or water having a bath| swimming or diving

Signal transmission distance is shown as below:

Attentions

  1. Please do not use this product while diving as water will block signals.
  2. Do not use corrosive liquid to clean this product.
  3. If this product is accidentally exposed to chemicals, clean it with water
  4. Do not use this product under extreme circumstances for temperatures below -10 degrees Celsius or above 60 degrees Celsius.
  5. To avoid an explosion, please do not throw this product into fire.
  6. To avoid scratches, please do not touch the earbuds with sharp objects.
  7. Do not insert objects into the earbuds, otherwise, it would cause damage to the internal components.
  8. Do not disassemble the earbud.
  9. Please keep regular charge to earbuds, don’t leave them to become empty battery status to keep their lifetime.
  10. Please do not charge products with a power adapter over 2A current. Excessive current may cause damage to the battery.

Battery Warning!
There is a built-in lithium battery in this product. To avoid explosion, do NOT expose the product to strong sunlight, fire, or throw it into the fire.

FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals