xiwxi EWC1W005-ICL-FF Apple Watch Wireless Charger User Guide

xiwxi EWC1W005-ICL-FF Apple Watch Wireless Charger

Specifications

• Model No: EWC1W005-ICL-FF
• Input Power: 5V/1A
• Output Power: 3W
• Compatible with: Apple Watch S1-8
• Net Weight: 14g
• Size: 665514mm
• No-load power consumption: 25~100 mW
• Working frequency: 300KHz-350KHz

Product Usage Instructions

1. Plug in the Charger: Plug the charging cable into the wireless charger.
2. Attach Watch to Charger: Attach the watch to the wireless charger, ensuring a secure connection.
3. Start Charging: When the charging icon is displayed on the watch screen, the wireless charging process begins.
4. Remove Watch: Once charging is complete, remove the watch from the wireless charger.

Notes:
It is recommended to charge the watch in an ambient temperature lower than 28 degrees Celsius for optimal charging efficiency.

Warranty Information:
The warranty period for this product is twelve months. Contact the purchasing channel or manufacturer for after-sales service under warranty for failures or damages not caused by human factors. The warranty does not cover damages caused by force majeure or human factors post-warranty expiration.

FCC Warning:
This device complies with FCC regulations and should not cause harmful interference. Follow recommended guidelines to prevent undesired operation and interference.

FCC RF Exposure Statement:
The equipment meets FCC radiation exposure limits. Maintain a minimum distance of 20cm between the radiator and your body during installation and operation.

Operation manual

1. Plug the charging cable into the wireless charger.
2. Attach the watch to the wireless charger, and when the charging icon is displayed on the watch pane The watch starts charging wirelessly.
3. Remove the watch from the wireless charger when charging is completed.

Notes
It is recommended that the charging ambient temperature be lower than 28 degrees Celsius, as higher
temperatures can lead to a decrease in charging efficiency.

Safety Tips

1. Do not put foreign metal objects in the charging area between the phone and the wireless charger, which will lead to latent danger.
2. Do not put magnetic stripe cards (such as credit cards, telephone cards, bank cards, etc.) or some medical equipment (such as pacemakers or hearing aids) together with this product, which may cause damage to the magnetic stripe or abnormal operation of the equipment.
3. Do not apply heavy pressure and place it out of reach of children or animals.
4. Do not disassemble, refit and repair the wireless charger by yourself, otherwise, it will not be able to carry out normal after-sale service.

Warranty

The warranty of this product is twelve months. Failure or damage not caused by human factors, please contact the purchasing channel or manufacturer for after-sales service under warranty.

The warranty does not apply to the following:

1. Damage caused by force majeure.
2. Failure or damage of the product caused by human factors.
3. Warranty expired.

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance between 20cm the radiator your body.

FAQ

Q: What should I do if the charging icon does not appear on my Apple Watch?
A: Ensure that the watch is securely attached to the wireless charger and try repositioning it. If the issue persists, check the charger connection and restart the charging process.

Q: Can I use this wireless charger for other smartwatches?
A: This wireless charger is specifically designed for Apple Watch models S1-8 and may not be compatible with other smartwatch brands.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>